Is there an exception to the rule "vlans cannot be created or modified" in client mode in vtp

Is there an exception to the rule "vlans cannot be created or modified" in client mode in vtp

Vipul,
Not sure what your interviewer was expecting as an answer. But yes your understanding is perfectly correct that you cannot create/modify/delete the vlans from client mode as it would through you the error saying: " VTP vlan configuration ont allowed when the device is in CLIENT mode.".
The only difference I can think of:  As a _user_ in VTP client mode you have restrictions on_what you can do_ (create,delete,modify) to the vlan.dat file whereas in Server mode you(the user) have none of those restrictions. But from the _switches'_ own perspective it doesn't make the distinction between the two modes. In other words the switch is not aware of the mode the other switches are in.
A switch would not advertise to another switch like "hey I am a client/server"  but will advertise "hey this is my revision number" and the other switch will then compare to it's own. The one with the highest revision number will be the one who gets the privelege to 'sync' its vlan.dat to the other switch.
HTH

Similar Messages

  • I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    I have adobe photoshop CS6 and I am trying to use the analysis tools but all of them except for the ruler tool are unavailable. Am I missing certain plug ins?

    Which operating system?
    If I recall, some features were not fully supported on XP.
    Nancy O.

  • The target file cannot be created

    I'm trying to output an Adobe Bridge Lightroom Flash gallery.
    I keep getting the following error message ad nauseum.
    The target file cannot be created.
    There are two possible reasons:
    1. Disk space is innsufficient.
    2. The target file path is too long.
    I've never had this happen before.
    I've worked on this file for two weeks, and NEED IT OUTPUTED. It's for a major newspaper regarding HDR photos of Japan's 3.11.11 disaster.
    I cleared out the cache. So it can't be anything like that.
    It's the latest version of Bridge.
    I'm on a new iMac with 2g storage, and 16g memory. Mac Lion. Blah, blah, blah.
    Is there a lame built in limitation on how many photos can be used? I'm using 300 photos. I've had no issues outputting 200 before.
    Setting for view sizes are 800, 800, 75, 100.
    Look, if you DON'T know specifically, don't chime in. I've tried some poor advice which has resulted in having to reorder 300 files, which wasnt fun.
    This is a seriously and timely issue, as the deadline approaches, and I need to get this pathetic problem resolved.
    PS, Adobe Bridge SUCKS!

    I've had the exact same issue here as well. Phone support is does not work with this product and I've been in Chat "Hold" for 3 hours now.  I've replaced the output module, checked and verified all permissions, cleared all preferences, with no avail.
    I have not had any issue with uploading galleries for the past year, and now, all of a sudden, issues. 
    iMac 27", Yosemite, 16GB Mem, 800 GB space, no permissions issues as I've also tried to just save the gallery to my desktop and upload via ftp client, but Bridge says location does not exist, which, ha, it does, because its on the hard drive....

  • Probably the exception - not the rule

    I've been messing around with computers since the days of the Radio Shack Commadore Vic 20. It can be a frustrating hobby - to say the least. I've had the typical Adobe free stuff on my computer for years, and fooled around with Photoshop on other pc's. (my brother works in a print shop and advised me not to purchase it).
    Recently I purchased my first Adobe software - Premiere Elements. I was pretty excited about the prospect of doing more editing than I could in Windows Movie. Installing it was a bit of a hassle, but I hung in there.
    Today was the first time I've had a chance to sit down and play around with it. I started about 6am, it's now 11:20am. About 90% of the last 5 hours and 20 minutes has been spent rebooting, re-opening after the hundreds of crashes, reading the barage of error messages, closing every other program I can think of that might be conflicting.
    From what I could tell, some of the features looked like they might be fun. I wish I could have kept the program running long enough to give it a better try.
    For the record, my computer is only about a year old and the only issue I've had with it is Windows Vista, (but that's another story).
    As my title stated, I'm sure I'm probably teh exception and not the rule. In all my years of computering, including many years using digital audio recording software such as Cakewalk SONAR, Cubase and Pro Tools, I've never had so many countless issues, one after the other, with ANY software . . . EVER! The ridiculousness of it is almost comical. Truly, without a doubt - the biggest waste of my money in 2010 - no question about it. I can honestly say I will NEVER even think about purchasing anything from Adobe again.
    If it was a glitch here or there that I could work thru - that would be all in a days work. The "glitches" were too many to count. Literally every mouse click brought on a new error or freeze up. I don't think my computer has been restarted this many times all month.
    Anyway - have fun. I'm off to find video editing software that I can actually use to edit video. 

    If you actually want help, you have the link for the PElements forum
    But, before you go there, nobody can help without DETAILS
    How to ask a question http://forums.adobe.com/thread/416679
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Also, this is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Do not reply here... go to the PElements forum for help with that product

  • The purchase order cannot be created on Hold

    Hello gurus,
    I have a doubt, when I want to create a purchase order (transaction ME21N) adopting a purchase requisition, the button "Hold" dissapear.
    Any reason why the button "Hold" is missing when adopt the purchase requisition to the purchase order?
    I need to save the purchase order on Hold after the adopting, but, I cannot find the button.
    Could you help me please a.s.a.p.?
    Regards,
    Sandra Palomo

    See the info below:
    Deactivate 'Hold' Function for Enjoy Purchase Order                                                                               
    Use                                                                               
    Application component: MM-PUR-PO-GUI                                                                               
    Function group: MEPO                                                                               
    The Business Add-In (BAdI) ME_HOLD_PO enables you to specify whether an      
         Enjoy purchase order can be put on hold or whether this function is to be    
         suppressed in accordance with your requirements.                                                                               
    In the standard system, this function is generally offered during the        
         creation of an Enjoy purchase order (transaction ME21N) and when a PO        
         that is on hold is changed (transaction ME22N).                                                                               
    Note                                                                               
    Enjoy purchase orders cannot be put on hold if any of the following          
         criteria apply:                                                              
         o  The PO contains service items                                             
         o  The PO contains "third-party" items                                       
         o  Commitment errors are involved                                            
         o  Subsequent (period-end volume rebate) settlement is involved                                                                               
    Standard settings                                                                
         o  In the standard system the Business Add-In is not active.                 
         o  The BAdI is not filter-dependent.                                         
         o  The BAdI cannot be used multiple times.                                                                               
    Example                                                                               
    You will find an example implementation under Goto -> Code Example.                                                                               
    In this example, the following behavior is defined:                                                                               
    In the case of stock transfers within a company code, the "Hold" function    
         is generally inactive. If an application object contains an error of any     
         kind, the function is likewise inactive.

  • DFS - The replication group cannot be created - insufficient permissions - NOT DOMAIN ADMIN, LOCAL ADMIN

    Hi,
    I am trying to setup DFS replication on tow servers. I am local admin on the servers but NOT domain account. Is it possible to create Replication group anyway? or should i contact the Domain administrator to the job?
    Thanks

    Hi,
    We cannot use local administrator to create a dfs replication group. By default, Domain Admins group can create a dfs replication group. You could also delegate to a user or group the ability to create replication groups and the user must add to the local Administrators
    group on the namespace server.
    For more detailed information, please refer to the article below:
    Delegate the Ability to Manage DFS Replication
    http://msdn.microsoft.com/en-us/library/cc771465.aspx
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Is there an easy way to securely delete everything on my macbook PRO except for the OS and applications?  Giving my old Macbook to a family member.

    Is there an eay way to securely erase all information on my macbook Pro except for the OS and applicatios?  I'm donating my computer but want to eliiminate my files and info.

    Yes, boot to your install disk (start up while holding C key).  Go to Utilities>Disk Utility.  Choose erase and format your disk (make sure it's formatted as Mac OSX extended journaled).  There's is a button for security options.  Choose the 0 option (don't choose the multiple pass versions, or it will take forever, but that's extra security).  The 0 option writes a 0 in every location on the drive, and it takes a few hours.  It would take CIA or highly skilled hacker abilities to dig out any information.
    Once you wipe the disc, reinstall OSX.  You're done.

  • I have created a Blog in iWeb and uploaded it to an FTP server.   It works fine, except that the 'Comments' facility is missing.   When I upload the blog to MobileMe   the 'Comments' facility is there and working great.   How can I solve the problem on th

    I have created a Blog in iWeb and uploaded it to an FTP server.   It works fine, except that the 'Comments' facility is missing.   When I upload the blog to MobileMe   the 'Comments' facility is there and working great.   How can I solve the problem on the FTP server Blog.

    You haven't a problem. You simply did not read the iWeb Help :

  • SQL Azure Reporting - There was an exception running the extensions specified in the config file. --- Maximum request length exceeded.

    I am trying to deploy an RDL file (5MB) to SQL Azure Reporting server in South Central US using the deploy function in SQL Server Data Tools but facing the following error during deployment to Azure Reporting server.
    "There was an exception running the extensions specified in the config file. ---> Maximum request length exceeded."
    Is there any limit on the size of RDL files which can be deployed to Azure Reporting server? I have seen some online posts which talk about increasing the maxRequestLength in httpruntime of web.config in Reporting server. But in case of Azure Reporting server
    how can be make modification to this configuration?
    I have tried to upload it directly to SQL Azure Reporting server from the Management Portal --> Upload Report function which still resulted in error.
    Thanks & Regards, Deep

    Thanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services.  Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
    Thanks Guy

  • I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

    Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
    Thanks again

  • I am unable to sync my old Itunes library to the IMac I purchased last month, I tunes wants to erase the old library except for the ITunes I have purchased. Any ideas  out there?

      I am unable to sync my old Itunes library to the IMac I purchased last month, I tunes wants to erase the old library except for the ITunes I have purchased. Any ideas  out there?

    - You can only syncewith one iTunes library.  It sounds like you change libraries such as changing the computer.
    - As you may know you can transfer iTunes' pruchases to a new computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - This previous discussion provide info on how to move other music from an iPod to a computer:
    Best iPod to PC
    - You can also manage music with different computers by:
    Using iPhone, iPad, or iPod with multiple computers
    - If you need more help please provide more information.

  • IPad 2 Mail: Is there a way to set Rules for folders, similar to Mail in the iMac?

    iPad 2 Mail: Is there a way to set Rules for folders, similar to Mail in the iMac?

    Based on your answer, and the answer to another question (which I didn't see before I asked mine, even tho I searched), I get the impression that iPad Mail is just a different face on web mail, that the messages are only stored on the server, not downloaded and stored on the iPad 2. Is that correct?

  • TS1389 I bought an album and all the songs play except for the first one.  It keeps telling me to authorize my computer to play this song.  None of the above helped me.  Is there any other solution?

    I bought an album and all the songs play except for the first one.  It keeps telling me to authorize my computer to play this song.  None of the above helped me.  Is there any other solution?

    petrou74 wrote:
    ...  None of the above helped me.  Is there any other solution?
    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • Is there a preference setting somewhere to KEEP the RULER on?

    The title says it all.  I hate having to turn the ruler on for each image.  I don't see anything obvious in the PREFERENCE file or anywhere else?
    Thanks,  -bill

    MTSTUNER wrote:
    Once you have it checked, every image you open should have rulers
    until you uncheck the viewr>rulers.
    I was going to say a similar thing......
    I can only speak for CS3 but maybe the same thing applies - whatever setting (view/not view) was on your last document, that is the setting which will open your next document

  • Is there a limit to the number of content selectors?

    <p>I'm on WebLogic 8.1.4.
    <p>I am using content selectors to pull metadata from Documentum, and I am currently experiencing 2 problems --
    <p>Problem 1) I can't seem to create subdirectories under \META-INF\data\contentselectors\GlobalContentSelectors\. If I do so, and create some content selectors under a subdirectory, it will not work. I would like to organize my content selectors into subfolders under the GlobalContentSelectors directory.
    <p>Problem 2) I have created about 22 content selectors under GlobalContentSelectors directory, and I can preview the results queried for each .sel file, under the "Content Preview" tab, either in WL Workshop or in the Portal Admin page. I.e., there are results returned for every content selector created. However, when I generate a portlet from the .sel file, and invoke the content selector in a .jsp file, the content selector returns 0 results. I've created a content query in the same jsp file with the exact same query as in the content selector, and that works fine in the jsp. Next, I tried deleting 21 of the content selectors, leaving the one content selector I was working with, restarted the server, and reloaded the jsp file, and this time it works. Then, I put back all 21 of the content selectors, and restarted the server, and it stopped working again. This is very bewildering. I see a stack trace in the logs, but I'm not sure if it is related (See below).
    <p>Does anyone have any idea why this is happening? Any help is greatly appreciated!!!!!!!!
    <p>
    <pre><Jun 28, 2005 3:24:18 PM PDT> <Error> <Rules> <BEA-401004> <An error occured parsing the rule set XML document with URI /contentselectors/GlobalContentSelectors.rls. Refer to the root cause below.com.bea.p13n.expression.internal.parser.ParseException: The parsing engine has encountered a fatal error condition; see embedded exception for details.
    at com.bea.p13n.expression.internal.parser.ExpressionParserImpl.parse(Ljava.lang.String;Ljava.io.Reader;)Ljava.lang.Object;(ExpressionParserImpl.java:190)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.createRuleSet(Ljava.lang.String;Ljava.lang.String;)Ljava.lang.Object;(RuleSetPersistenceManager.java:523)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.createDataItem(Lcom.bea.p13n.management.data.repository.DataRepository;Lcom.bea.p13n.management.data.repository.DataItem;)Lcom.bea.p13n.management.data.repository.Result;(RuleSetPersistenceManager.java:172)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.handleDataItemMessage(Lcom.bea.p13n.management.data.repository.DataItemOperation;)V(AbstractDataRepository.java:887)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onDataSyncMessage(Lcom.bea.p13n.management.data.repository.DataSyncMessage;)V(AbstractDataRepository.java:826)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:217)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onSyncRequestResultMessage(Lcom.bea.p13n.management.data.repository.SyncRequestResultMessage;)V(AbstractDataRepository.java:980)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:226)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onSyncRequestMessage(Lcom.bea.p13n.management.data.repository.SyncRequestMessage;)V(AbstractDataRepository.java:945)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:222)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.notifyDataRepository(Lcom.bea.p13n.management.data.repository.DataRepository;Ljava.lang.String;)V(AbstractDataRepository.java:679)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onRefreshMessage(Lcom.bea.p13n.management.data.repository.RefreshMessage;)V(AbstractDataRepository.java:742)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:212)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.refreshDataRepository(Lcom.bea.p13n.management.data.repository.DataRepository;)V(AbstractDataRepository.java:328)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.addNotifiedDataRepository(Ljava.lang.String;Lcom.bea.p13n.management.data.repository.DataRepository;Z)Z(AbstractDataRepository.java:306)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.addNotifiedDataRepository(Lcom.bea.p13n.management.data.repository.DataRepository;Z)Z(AbstractDataRepository.java:285)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.register()V(RuleSetPersistenceManager.java:495)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.<init>()V(RuleSetPersistenceManager.java:127)
    at java.lang.Object.emptyConstructor()V(Unknown Source)
    at java.lang.Class.newInstanceCached(I)Ljava.lang.Object;(Unknown Source)
    at java.lang.Class.newInstance(I)Ljava.lang.Object;(Unknown Source)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getRuleSetRepository()Lcom.bea.p13n.rules.manager.RuleSetRepository;(RulesManagerImpl.java:433)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getContextPoolFactory()Lcom.bea.p13n.rules.manager.internal.ContextPoolFactory;(RulesManagerImpl.java:457)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.ejbCreate()V(RulesManagerImpl.java:559)
    at com.bea.p13n.rules.manager.internal.RulesManager_jswjkk_Impl.ejbCreate()V(RulesManager_jswjkk_Impl.java:135)
    at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
            at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
            at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
    Caused by: java.lang.IllegalArgumentException: Invalid rule Rule [name=index, description=]. A rule with the same name already exists.
    at com.bea.p13n.rules.internal.RuleContainerImpl.add(Lcom.bea.p13n.rules.internal.Rule;)V(RuleContainerImpl.java:91)
    at com.bea.p13n.rules.internal.parser.core.CoreTransformVisitor.visit(Lcom.bea.p13n.rules.internal.parser.core.RuleSetNode;Ljava.lang.Object;)Ljava.lang.Object;(CoreTransformVisitor.java:157)
    at com.bea.p13n.rules.internal.parser.core.RuleSetNode.accept(Lcom.bea.p13n.rules.internal.parser.core.CoreVisitor;Ljava.lang.Object;)Ljava.lang.Object;(RuleSetNode.java:37)
    at com.bea.p13n.rules.internal.parser.core.CoreCompositeNode.accept(Lcom.bea.p13n.expression.internal.parser.expression.ExpressionVisitor;Ljava.lang.Object;)Ljava.lang.Object;(CoreCompositeNode.java:43)
    at com.bea.p13n.expression.internal.parser.expression.ExpressionCompositeNode.accept(Lcom.bea.p13n.expression.internal.parser.ast.Visitor;Ljava.lang.Object;)Ljava.lang.Object;(ExpressionCompositeNode.java:48)
    at com.bea.p13n.rules.internal.parser.core.CoreTransformVisitor.transform(Lcom.bea.p13n.expression.internal.parser.ast.Node;Ljava.lang.String;)Ljava.lang.Object;(CoreTransformVisitor.java:103)
    at com.bea.p13n.expression.internal.parser.ExpressionParserImpl.parse(Ljava.lang.String;Ljava.io.Reader;)Ljava.lang.Object;(ExpressionParserImpl.java:185)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.createRuleSet(Ljava.lang.String;Ljava.lang.String;)Ljava.lang.Object;(RuleSetPersistenceManager.java:523)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.createDataItem(Lcom.bea.p13n.management.data.repository.DataRepository;Lcom.bea.p13n.management.data.repository.DataItem;)Lcom.bea.p13n.management.data.repository.Result;(RuleSetPersistenceManager.java:172)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.handleDataItemMessage(Lcom.bea.p13n.management.data.repository.DataItemOperation;)V(AbstractDataRepository.java:887)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onDataSyncMessage(Lcom.bea.p13n.management.data.repository.DataSyncMessage;)V(AbstractDataRepository.java:826)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:217)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onSyncRequestResultMessage(Lcom.bea.p13n.management.data.repository.SyncRequestResultMessage;)V(AbstractDataRepository.java:980)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:226)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onSyncRequestMessage(Lcom.bea.p13n.management.data.repository.SyncRequestMessage;)V(AbstractDataRepository.java:945)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:222)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.notifyDataRepository(Lcom.bea.p13n.management.data.repository.DataRepository;Ljava.lang.String;)V(AbstractDataRepository.java:679)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.onRefreshMessage(Lcom.bea.p13n.management.data.repository.RefreshMessage;)V(AbstractDataRepository.java:742)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.executeMessage(Lcom.bea.p13n.management.data.repository.Message;)V(AbstractDataRepository.java:212)
    at com.bea.p13n.management.data.repository.internal.MessageDispatcherImpl.sendMessage(Lcom.bea.p13n.management.data.repository.MessageExecutor;Lcom.bea.p13n.management.data.repository.Message;)V(MessageDispatcherImpl.java:90)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.refreshDataRepository(Lcom.bea.p13n.management.data.repository.DataRepository;)V(AbstractDataRepository.java:328)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.addNotifiedDataRepository(Ljava.lang.String;Lcom.bea.p13n.management.data.repository.DataRepository;Z)Z(AbstractDataRepository.java:306)
    at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.addNotifiedDataRepository(Lcom.bea.p13n.management.data.repository.DataRepository;Z)Z(AbstractDataRepository.java:285)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.register()V(RuleSetPersistenceManager.java:495)
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.<init>()V(RuleSetPersistenceManager.java:127)
    at java.lang.Object.emptyConstructor()V(Unknown Source)
    at java.lang.Class.newInstanceCached(I)Ljava.lang.Object;(Unknown Source)
    at java.lang.Class.newInstance(I)Ljava.lang.Object;(Unknown Source)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getRuleSetRepository()Lcom.bea.p13n.rules.manager.RuleSetRepository;(RulesManagerImpl.java:433)></pre>
    <p>Here's the jsp file --
    <p>
    <pre><%--Generated by WebLogic Workshop--%>
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@taglib uri="http://www.bea.com/servers/portal/tags/personalization" prefix="pz"%>
    <%@taglib prefix="utility" uri="http://www.bea.com/servers/p13n/tags/utility"%>
    <%@taglib prefix="cm" uri="content.tld"%>
    <%-- Retrieve the content and display each node name in a list. --%>
    <h3>Test 1 - Using Content Selectors</h3>
    <pz:contentSelector rule="unify_cc_disclosures_bal_transfer" id="nodes"/>
    <font color="red">Query returned [<%= nodes.length %>] items.</font>
    <utility:notNull item="<%=nodes%>">
    <ul>
    <utility:forEachInArray array="<%=nodes%>" id="node" type="com.bea.content.Node">
    <li><cm:getProperty id="node" name="cm_nodeName" conversionType="html"/></li>
    </utility:forEachInArray>
    </ul>
    </utility:notNull>
    <h3>Test 2 - Simple query execution</h3>
    <cm:search id="mytest" query="a_webc_url='pages/unify/credit_cards/disclosures/bal_transfer.xhtml'" failOnError="true" />
    <font color="red">Query returned [<%= mytest.length %>] items.</font>
    <utility:forEachInArray array="<%=mytest%>" id="aDoc" type="com.bea.content.Node">
    <li><b>a_webc_url:</b> <cm:getProperty id="aDoc" name="cm_nodeName"
    failOnError="true" />
    <li>The <b>object name</b> is: <cm:getProperty node="<%=aDoc%>"
    name="object_name" failOnError="true" />
    <li>The <b>Id</b> is: <b>content link</b><cm:getProperty node="<%=aDoc%>"
    name="cm_uid" failOnError="true" />
    <li>The <b>path</b> is: <%= aDoc.getPath() %>
    <li>the is;
    <a href="<%=request.getContextPath() + /ShowBinary?nodeId=" +
    aDoc.getId() %>"/>Content</a>
    </utility:forEachInArray></pre>

    I don't think it's an issue of file length, however, as a test you could revert to your previously working file and place all the new CSS in a new file, and see whether that makes any difference.
    If you clear the error console and reload the page, do you get any unexpected style warnings? By unexpected, I mean things other than, for example, -webkit-transform is not recognized and is being dropped. Illogical messages can indicate an unnoticed typo.

Maybe you are looking for