Is there an incompatibility between I-Phone 6

Product : I-PHone 6 Model No MG482HN/A
IOS : 8.1.2
Problem: Connectivity with BSNL(INDIA) Nano SIM Card to connect to Internet was found to be very poor.Wi-Fi connectivity at the same location is OK.For comparison connectivity of Samsung Galaxy S3 with BSNL SIM Card at the same location (Home) is very good.Contacted Apple at 1800 425 0744 and local Apple authorised Premier dealer UNICORN in Pune innumerable times.Suggestions by Apple on "SIM Card connectivity issues" tried out from A to Z.,except Restore to factroy settings. Met in person BSNL engineers and one of them confirmed that many I-Phone owners have brought up this complaint.Unicorn technician even suggested changing carrier to Vodafone.Apple techs said their partners are Airtel and Reliance.
I-Phone advertisements did not mention that owners will get satisfactory service only if they have Airtel or Reliance accounts. A serious omission!
Any suggestions.

I finally found the replies in Gmail help. There is no problem.
You need the correct ports.

Similar Messages

  • Is there any incompatibility between Labview 8.5 and Traditional DAQ?

    Hi,  I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
    Thanks.

    First, you posted to the wrong board. Measure is an old add-on for Excel.
    Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

  • Is there an incompatibility between iPad2 and outlook 2010 calendar? I can sync appts down to the device but not up to the computer calendar.

    Hi all,
    Would you know whether there is an incompatibility between iPad2 and outlook 2010 calendar? I can sync outlook appointmens down to the device but not up to the computer calendar. The same occurs with my iPhone 4, can sync appointments down to the device, but not back up to the computer. Any help appreciated!

    Most computer's USB ports do not have enough power to charge iPads while they are active.  An iPad will charge while in sleep mode, but very slowly.

  • Is there an incompatibility between Gmail and mail 1.3?

    I created a new Gmail account for my mother on her eMac running 10.3.9 and Mail 1.3
    I followed the gmail instructions for smtp and Imac. I also tried setting it up as Pop, either way I was unable to send or receive mail.
    Is there any special port setting required? any special SSL? It goes through port 25

    I finally found the replies in Gmail help. There is no problem.
    You need the correct ports.

  • Incompatibility between iTunes 11.1.3 and Apple TV?

    Up until a few days ago, our 3rd generation Apple TV, purchased in August 2013, permitted home sharing with our iTunes music library without any problem. After having gone through every troubleshooting suggestion, we can no longer access the iTunes library. We can still view movies, movie trailers, YouTube, Smithsonian, Vimeo, etc. Even though home sharing is set to "on" for both iTunes and ATV, the iTunes music library refuses to open. This 3rd generation ATV is connected with an eithernet cable, a connection I assumed would guarantee fault-free operation.
    Our older ATV is 2nd generation and its connection is wireless. Thus far this older ATV has no problem gaining access to our iTunes music library.
    Is there an incompatibility between iTunes 11.1.3 (8) and the 3rd generation Apple TV that could be causing this trouble?

    No, there is no compatibility issue.
    There is a network issue causing problems.  Most AirPlay issues boils down to a networking issue, especially when one ATV connects and the other does not.

  • Possible consolidation incompatability between Vista and OSX ?

    I want to use the same library with my iTunes sessions in Vista and OSX.
    The library is located on an external HD.
    iTunes is configured on both platforms to keep music organized. I used the consolidate feature to initially move the music from the OSX partition to the external HD. No problem there.
    But then when I pointed my Vista session of iTunes to the new library, it wanted to organize the music again. Assuming it would not do much since I had just consolidated from the OSX side, I allowed it to proceed. Now most of the music on the OSX session has exclamation points, indicating that the music had been moved and the pointers are lost.
    Is there an incompatibility between consolidation methodologies between OSX and Vista versions of iTunes? Is it not possible for me to have iTunes from differences operating systems manage the same library?
    I appreciate any help with this...

    dbustani wrote:
    So if I turn off "keep organized", how do I in fact keep things organized as I rip CD's from both platforms?
    When you rip a CD, iTunes will put the tracks in proper "organized" (Artist/Album) location. However, the second iTunes will not know it is there. You can either (a) add the new files manually to the second iTunes, via File > Add Folder to Library, or (b) run a 3rd party folder-watching program such as iTunes Folder Watch that will add them automatically as they appear. Disclaimer: I have not personally used that program, so read up and make sure you are happy with it.

  • Can't decide between the iphone or ipad as my first apple product. Is there a difference other than phone and size?

    Can't decide between the iphone or ipad as my first apple product. Is there a difference other than phone and size?

    A couple of differences:
    iPad native apps
    Interactive e-books with multi-touch and 3D support (in iBooks 2)
    Layouts (kind of merges with iPad apps, Music/Settings, etc. all look different)
    Wi-Fi only models, no contracts
    iPads are unlocked by default (3G models)
    As paul said, I would really wait for the next iteration of iPad. That's what I'm doing

  • Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    It the same phone but you don't have to have data on it if you don't want since they are older phones.  We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone.  Mary

  • I have multiple iphones at my business that we take photos with and upload to one icloud account.  Is there anyway to tell the difference between the phones?  I tried the info tab but they are all iphone 4's?

    I have multiple iphones at my business that we take photos with they are all uploaded to the same icloud account.  Is there anyway to tell which phone the photo came from?  The info tab doesn't help because they are all iphone 4's.

    NNot with the regular MY Photo Stream. You could use individual Shared Photo Streams instead for each iPhone, if the iOS versions support shared streams. upload to a shared stream is not automatic however. You will have to share them manually.

  • Incompatibility between DW on different computer browsers

    I'm a graphic designer / dabble a bit in DW / beginner coding skillset
    In essence:
    1) I'm working on a five button menu in a style that's commonly known as a "Mac (MacIntosh) Docker / Fisheye" effect.
    2) On one computer it works fine in the IE browser.
    3) I copy all related the files in order to place them on another computer.
    4) Upon viewing the same file in the browser (both Fire Fox and IE) on this computer, the rollover effects do not work.
    Any suggestions?

    Thanks for the quick response.
    This is but an experiment so it's not posted anywhere. The files are few so I've attached them (hope you don't mind).
    For the few sites I create; I use a very easy WYSIWYG program called "Xara Web Designer". I create my pages there and every so often I like to slip in a special effect I find online. In this case it was a Mac Docker http://ndesign-studio.com/blog/css-dock-menu similar to this one. I tweak the code in DW; kind half-***, trial & error - nip & tuck while previewing in split screen / live view. When I like what I see I save it.
    I go back to Xara and create a "placeholder" box and paste in the html code from the docker (created in DW) - hit preview in browser and voilá - no fuss no muss.
    It's how I've done things up to know but this particular docker is giving me grief and I can't seem why.
    NOTE:
    In the past I've seen a .css file in the batch. In this docker there is none yet it looks fine in DW.
    As I stated before; I'm strictly a graphic designer swimming in the deep end of the pool . . . with no floaties!
    Any assistance is greatly appreciated.
    Date: Wed, 15 Aug 2012 07:42:55 -0600
    From: [email protected]
    To: [email protected]
    Subject: Incompatibility between DW on different computer browsers
    Re: Incompatibility between DW on different computer browsers created by SnakEyez02 in Dreamweaver - View the full discussion
    If you are using DW rollover effects did you copy over the Scripts folder as well with the Javascript files to make the rollovers work, or are you using CSS for the effects.  If you are sure you have all the files please share the page with us so we can see it.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4622890#4622890
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4622890#4622890. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Dreamweaver by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Incompatibility between JDK 1.4 and Windows XP Fax and Picture Viewer

    I have noticed an incompatibility between JPG files that are output from Windows XP Fax and Picture Viewer and read in by JDK 1.4 (or 1.4.1). In particular, when an image is transfered from a digital camera to a Windows XP machine, then rotated and saved in the Windows XP Fax and Picture Viewer, the resulting image file appears with corrupted colors when read and saved by the ImageIO class in JDK 1.4.
    Here is my code:
         import java.awt.image.BufferedImage;
         import javax.imageio.ImageIO;
         BufferedImage buffImg = ImageIO.read (new File ("in.jpg"));
         ImageIO.write (buffImg, "jpg", new File ("out.jpg"));
    I have also output the file with graphics format PNG and seen similar apparent corruption of colors.
    This is an image that was loaded onto Windows XP from a digital camera then rotated 90 degrees and saved with the Windows XP Fax and Picture Viewer:
    http://www.adigitalsolution.net/pics/verticalOrig.jpg
    Here is the same image read and written by JDK 1.4 ImageIO.read() and ImageIO.write():
    http://www.adigitalsolution.net/pics/verticalJavaOut.jpg
    Note that the colors appear corrupted in the above image.
    This is an image copied directly from a Sony Cybershot DSC - P71 digital camera:
    http://www.adigitalsolution.net/pics/horizontalOrig.jpg
    Here is the same image read and written by JDK 1.4 ImageIO.read() and ImageIO.write():
    http://www.adigitalsolution.net/pics/horizontalJavaOut.jpg
    It appears fine (brilliant tropical colors).
    Note that both images contain the "EXIF" header, which is the JPEG-like format used by many digital cameras. Some may say that the JDK 1.4 spec does not support EXIF, but the image not touched by Windows XP was read successfully. And other image editing programs read in both successfully, such as PaintshopPro and the Mozilla 1.0 web browser. But there is a specific incompatibility with JDK 1.4.
    I have reproduced this problem on Windows NT 4 and Red Hat Linux 7.3 using an image file that was saved on Windows XP.
    Here is a warning from Nikon about the behavior of Windows XP Fax and Picture Viewer:
    http://www.dpreview.com/news/0112/01121402nikonxpwarnings.asp
    Does anybody know a workaround?

    This is scary and explains why some of my Exif headers are trashed.
    I would guess the problem has something to do with XP not writing the file back out 100% true to the JPEG spec.
    Really annoying that they do this. They think they can just hack up and change standards that are not their own. Take their FTP client in Windows XP. Talk about a broken client.
    My suggestion is to dis-associate jpegs with XP's image and fax viewer. Instead associate them with Mozilla.

  • Failed to resolve incompatibility between price lists

    Hej,
    I have several price list but in one when I add item I get the following error
    Failed to resolve incompatibility between price lists(item) Duplicate price list lines( i.e. equal precedence): US dc and US dc.
    I have checked the item is not duplicated anywhere in pricing, any idea why getting this error message?
    thanks and kind reagrds,
    /Z

    Check that if the same item is there in terms of category price list line and that has same precedence.

  • Is there a charge for cell phone if from Verizon to Verizon?

    Is there a charge for cell phone if from Verizon to Verizon?

    Are you asking if there is a charge for a CALL between two Verizon Mobile phones? Depends on the plan
    If you are asking about a call to a Verizon landline from a Verizon Cell phone, then there is a charge, unless the number is part of your Friends and Family List

  • Pick up group between analog Phone connected on VG224 with Cisco 7911 does not work?

    Hey guys,
    I had a problem, during a demo. My team was design a cisco callmanager 7.0 with 7911 IP Phone and with VG224 analog devices phones. I would like to know if there are some a problem of capability when configured a Analog Phone on VG224 in the same pickup group with Cisco IP Phone 7911.
    I got pickup between Analog phones but with I cannot pick up, between IP Phones and analog phones.
    Does anybody knows if has capability problem or could be a configuration problem.
    The feature has already enbled for pick up **3 (stcapp feature access-code).
    best regards
    Daniel

    Hi Daniel,
    Did you try **4
    The default settings for the VG224 feature codes are as follows:
    Call Forward All (CFA) **1
    Call Forward All Cancel **2
    Call Park Directed Call Pickup Directed **6
    Call Pickup Group **4
    Call Pickup Local **3
    Call Transfer = Hookflash
    Redial *#
    Speed Dial *01 to *99 for two-digit codes
    Speed Dial to Voice Mail Default prefix and code is *0 for one-digit codes, and *00 for two-digit codes
    http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1178205
    Hope this helps!
    Rob

  • Is there a difference between itunes and apple tv

    Sorry if this  has been asked before. Is there a difference between the content on iTunes and the content on Apple TV?
    I was searching for a movie today and found differing results to begin with between the iTunes on my phone and iTunes on my ipad2, this turned out to be the price for a SD version on my iPhone and the HD version found on my iPad2. However I searched for the same movie on Apple TV and couldn't find it, hence the why I am asking if there is a difference between what's available.

    Your Apple TV searches iTunes Store for either SD or HD but not both at the same time (you can change the default in settings), so if something isn't available in HD and you search using the HD default, you won't see it.

Maybe you are looking for

  • IMac slow start up

    my iMac OS x 10.7.3..is 8 months old and now takes over 2 minutes to start up. ???imac slow start up

  • Master Web Template (restrict # of data providers)

    Hi! Quick question: After suffering bad performance with a huge web template (about 70 queries), we were told to strip down the template into several small ones. We have now splitt them down into 4 web templates (15-20 each) and linked them into one

  • Database Crawler - what constitutes a modification?

    Hi It appears that the database crawler determines that an object has changed when the last modification date changes. In our schema we have a parent-child relationship situation such that we need to have a child object re-indexed when a particular c

  • FCPX constantly backing up and rendering issues.

    FCPX makes an automatic backup of almost every single change I make. It's really slowing me down. Every clip I select and drop into the timeline is backed up and I have to wait for it to process or the program grinds to a halt. It's essentially backi

  • App store unknown error

    If i try to downlaod a App or Update one i get the message "Unknown Error." I have try to reset the Network settings, restart the Iphone, WLAN and EDEG, nothing work anyone know a answer?