Is there an integration between CATS and TEM?
Hi friends,
I have this requirement:
I wanna see the training plans of an employee -that are made in TEM module- in his/her timesheet so that project managers can assign less work in the specified time interval.
Is there such an integration in the system?
Thanks in advance,
Best regards,
Dilek
Hi
There is no direct integration with TEM for CATS.
In CATS you book time against the training TASK and the time is then sent to Time Magmt and from time it is sent to TEM with the Integration of Time and TEM.
The EE can book time for future period in CATS against the TASK type created as training and that can be visible to the manager.
The time booked on the particular TASK type is sent to Time Magmt.
R K
Similar Messages
-
Integration between PD and TEM
Hi Gurus,
I am working on Training and Events Management. If I want to create training appraisals, I am seeing appraisals defined in PD on my screen. I just wanted to know what is the integration between PD and TEM.
Can somebody explain what the following sentence means. It is integration between TEM and TM.
When employees of your company participate in events either as attendees or instructors, you can
store attendance types in Time Management for checking purposes.
Points assured!
Thanks in advance.
Nivedita.Hi,
For integration between Time And TEM in table T77S0 switch PLOGI TIME is used for Integration TM and TEM
after that in the same table you have to maintain switches
SEMIN AINST for Attendance type for instructor in T554S
SEMIN APART for Attendance Type for Attendance in T554S
SEMIN TIMEP for Minimum percentage attendance
Warm Regards,
Kapil -
Is there any integration between Payroll and AP or Cash Management?
Hi All
Is there any integration between Payroll and AP or Cash Management?
Regards
Rahmanand that document refers to checkwriter as bridge between Payroll and Cash Management.
Q: But how many legislations have a checkwriter?
A: Only a very few.
So that is why i replied 'not really' in the beginning of this thread. -
Is there any integration between pages and postal zip codes?
Is there any integration between pages and postal zip codes?
Yvan KOENIG (VALLAURIS, France) lundi 27 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
Please, for iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
'Is there a link between OLM and iProcurement'
I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
Any help would be great
Thanks
DMI am afraid there is no link between the iProc and OLM.
The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
Thanks,
Anil Passi
http://oracle.anilpassi.com -
How does the integration between CRM and SD occur
How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanksHi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon -
Custom Integration between CLM and SRM
Hi
Can any body help me how to do custom integration between CLM 2.0 and SRM for contracts using PI. On SRM side we have customised API. More specifically I need what is to be done in PI for custom integration between CLM and SRM.
Thanks in Advance
M G REDDYHi There,
Has anybody managed to custom integrate CLM & SRM?
If so please kindly share how this was achieved.
Thanks,
Sheena -
Integration between SAP and third party tax software
can some body explain me or provide me docs regarding integration between sap and third party tax software like vertex.
ThanksHi
First configure the same via the following menu path:
1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
2.) Then test connection (option is available there).
3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
System Information>Function List
Check if the following functions are listed:
RFC_CALCULATE_TAXES_DOC
RFC_UPDATE_TAXES_DOC
RFC_FORCE_TAXES_DOC
RFC_DETERMINE_JURISDICTION
4.) Then test the tax data retrieval:
From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
The above 4 steps are necessary to satisfy that the RFC connection is established
Hope useful
S Jayaram -
### How to make integration between UCCX and Active Directory##
Hello,
I want to know what is the right procedure to perform a right integration between the UCCX and the Active Directory?
Waiting Yours Reply,,,,
Thanks a lot......What version?
Assuming a current version (5.0 and higher): there is NO direct integration between CCX and Active Directory. The CCX server must not be joined to a domain.
CCX uses UC Manager End Users for synchronized usernames and passwords. If UC Manager is synchronized with an LDAP source, such as Active Directory, then this will carry forward to CCX. CCX would pass authentication requests to CCX through AXL. UCM would perform the LDAP authentication and inform CCX of the success/failure. -
Integration between ESR and ARIS
Hi,
is there a integration between the standalone versions of ARIS and ESR?
Best Regards,
MichaelHi,
As far as I know, currently there is no integration/synchronization between ARIS and the ESR. For example, I have to model our BOs according to the models in ARIS.
Regards,
Simon -
Is there any integration between hashtags to enterprise keywords?
Is there any integration between hashtags to enterprise keywords?
keren tsurHi keren,
Could you please elaborate your question?
Here are some results as I tested:
1.Hashtags term set and Keywords term set are both under System term store group.
2.Enterprise keywords column could retrieve and use the terms from both Hashtags and Keywords, but new terms created in column could only be saved to Keywords term set.
3. Newsfeed web part could only retrieve the hashtags terms, and newly create hashtags terms could only be saved to Hashtags term set.
Here are some useful article about this topic you can take a look.
http://sharepoint.stackexchange.com/questions/94549/terms-keywords-tags-hashtags-this-is-confusing
http://sp2013.blogspot.com/2014/01/sharepoint-2013-hashtags.html
http://www.colligo.com/blog/sharepoint/3-quick-tips-for-using-hashtags-in-sharepoint-2013/
Thanks
Daniel Yang
TechNet Community Support -
Is it a Bug? Integration between Dreamweaver and Fireworks is broken in somewhere?
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282
I use CS3 Suite. It is a big trouble for me in working on
real pages. Integration is broken in somewhere else and after that
point it becomes impossible to work on Fireworks through
Dreamweaver.
I've made test to show this trouble and I narrowed the
problem to the pictures as shown in the figures below,
1) In figure one I am creating a completely new Fireworks
file as arrow.png with two frames and one slice in it. After I am
saving it as .png I am exporting it as .html with images in /images
subfolder.
2) After saving and closing the file in Fireworks, in figure
two, I am opening the html in Dreamweaver and changing the page
properties by writing zeros to page margins and by changing the
default font.
-----I guess in this point something happens which breaks the
integration between FW and DW--------because;
3) In figure three I am opening the .png through Dreamweaver
(by "Edit") and changes the place and size of the slice a little
bit
4) When I press Done in Fireworks I see this picture in
figure four in Dreamweaver which shows integration between FW and
DW about table structure is broken. (In this point if I add any
behaviur to the slice DW doesn't recognize it, or any other change
in FW can not be recognized by DW)
5) In order to show this broken integration in table
sturucture, I am putting a new slice to png when Editing from DW in
FW.
6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW doesn't have any effect on html's table
structure code.
I can not upload images related my topic here but you can see
it in the same topic at
http://www.fireworksguruforum.com/index.php?showtopic=14282damlays wrote:
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
> I use CS3 Suite. It is a big trouble for me in working
on real pages.
> Integration is broken in somewhere else and after that
point it becomes
> impossible to work on Fireworks through Dreamweaver.
>
> I've made test to show this trouble and I narrowed the
problem to the pictures
> as shown in the figures below,
>
> 1) In figure one I am creating a completely new
Fireworks file as arrow.png
> with two frames and one slice in it. After I am saving
it as .png I am
> exporting it as .html with images in /images subfolder.
>
> 2) After saving and closing the file in Fireworks, in
figure two, I am opening
> the html in Dreamweaver and changing the page properties
by writing zeros to
> page margins and by changing the default font.
>
> -----I guess in this point something happens which
breaks the integration
> between FW and DW--------because;
>
> 3) In figure three I am opening the .png through
Dreamweaver (by "Edit") and
> changes the place and size of the slice a little bit
>
> 4) When I press Done in Fireworks I see this picture in
figure four in
> Dreamweaver which shows integration between FW and DW
about table structure is
> broken. (In this point if I add any behaviur to the
slice DW doesn't recognize
> it, or any other change in FW can not be recognized by
DW)
>
> 5) In order to show this broken integration in table
sturucture, I am putting
> a new slice to png when Editing from DW in FW.
>
> 6) When I click on Done in DW I see this picture on the
figure six. Beacuse FW
> doesn't have any effect on html's table structure code.
>
>
> I can not upload images related my topic here but you
can see it in the same
> topic at
>
http://www.fireworksguruforum.com/index.php?showtopic=14282
>
>
>
I can reproduce your results, but I don't consider this a
bug; just a
limitation of Roundtrip editing.
You can't add or change slices without re-exporting the html
from
Fireworks. Roundtrip is for image editing, not for altering
the table
structure. If I edit, and re-export, my table remains intact.
If you want to edit the slices and resulting html, open the
PNG file
independently of Dreamweaver, change your slices and images
and then
choose File > Update HTML (this option is not available
when in
Roundtrip mode). FW will ask you to locate the html file.
When located,
you will have the options of
Replace Images and Their HTML - replaces the previous
Fireworks HTML.
Update Images Only - overwrites only the images.
As an aside, the rigid table created by FW is rarely
desirable for a
production web site.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage -
Is there any Link between BNK_MONI and DMEE
Hi ,
I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
I am running following sequence of T Codes :
RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
I want to update one of the fields in output file generated by BNK_MONI .
Is there any link between BNK_MODI and DMEE ?
Or shall I have to Debug background job created by F111 like it is done in case of F110 ?
Please suggest..
Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PMHi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM -
Is There any Relation Between PCD and SSO
Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya -
Can any one send procedure for integration between XI and Geographic inform
can any one send procedure for integration between XI and Geographic information System(GIS).
Please clarify ASAP..
ThanksHi,
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
GIS VS XI
Regards
Chilla..
Points rewarded if it is usefull..<i></i>
Maybe you are looking for
-
Single invoice for multiple orders with different divisions
Dear All, while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting t
-
Oracle Install Base -Unable to find Expire relationship button
Hi Experts, I am not able to find "Expire Relationship" button under Configuration Tab while trying to expire parent and child relationship in oracle install base for an intem instance.But for some item instance I am able to find the "Expire Relation
-
i know javascript is client side and jsp is server side and its just not possible to pass parameters or values from one to another but is there a way to work around this? i have a drop down and in my select <select name="month" onChange="field.value=
-
Hi, I'm new to ORPOS. I'm facing so many problems with the ORPOS application. Whenever I launch pos application, I am getting a message saying "Till must be opened to proceed with the operation. Press Yes to open". I clicked on open and the applicati
-
App keeps crashing, unable to use. How can I get a refund?
App keeps crashing, unable to use. How can I get a refund?