Is there an issue between EXSP24mkII and MOTU Symphonic Instrument?

I'm using Logic Express 7.2 for three large projects right now. Admittedly I'm pretty new to LE 7.2, since just recently switching over from Digital Performer.
So, far, LE has been very stable -- UNTIL last week when I loaded in MOTU's Symphonic Instrument. Now, if I have just one or two tracks of Symphonic instrument and nothing else, I'm fine, but if I start adding tracks that have different virtual instruments on them -- say, 2 tracks of Symphonic Instrument and 2 tracks of EXSP24 mkII, then I get frequent crashes.
The crashes occur as I record my first take on the first new track.
I can't seem to nail down a particular sequence of events yet, although I think I might be getting pretty close to figuring it out.
However, before I put in all the effort to figure out the bug, do you know if it's already been discovered? Are there known issues between Symphonic Instrument and Logic or MacIntels, or something?
Thanks!

I do have the latest version -- the one that's compatible with the MacIntels. And, when it's the only plug-in, it works great.
Well, maybe not quite as great as EXSP24mkII, but pretty good. There are still some wierd clicks that happen during playback occasionally, but, VERY fortunately, don't happen when I bounce the tracks down.
It doesn't seem like there's a known issue, so I'll see if I can isolate a series of actions that cause the problem. If I can nail it down, I'll let you all know.

Similar Messages

Compatibility issues between R12 and report builder 2.5

Hi,
I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
Thanks
peopsquik

As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

Is there a conflict between Firefox and Carbomite?

I have been having problems with unresponsive script errors in Firefox, in both normal and Safe modes. I got the idea that one of my background programs could be causing the problem, so I disabled all of them and then enabled them individually. Enabling Zone Alarm did not cause a problem, so I enabled Carbonite. Sure enough, the unresponsive scripts returned, in both normal and Safe modes. Is there a known issue between Firefox and Carbonite that causes unresponsive scripts and, if so, what can I do about it short of disabling Carbonite? Thanks for any help!

I have been having problems with unresponsive script errors in Firefox, in both normal and Safe modes. I got the idea that one of my background programs could be causing the problem, so I disabled all of them and then enabled them individually. Enabling Zone Alarm did not cause a problem, so I enabled Carbonite. Sure enough, the unresponsive scripts returned, in both normal and Safe modes. Is there a known issue between Firefox and Carbonite that causes unresponsive scripts and, if so, what can I do about it short of disabling Carbonite? Thanks for any help!

'Is there a link between OLM and iProcurement'

I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
Any help would be great
Thanks
DM

I am afraid there is no link between the iProc and OLM.
The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
Thanks,
Anil Passi
http://oracle.anilpassi.com

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Is there any Link between BNK_MONI and DMEE

Hi ,
I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
I am running following sequence of T Codes :
RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
I want to update one of the fields in output file generated by BNK_MONI .
Is there any link between BNK_MODI and DMEE ?
Or shall I have to Debug background job created by F111 like it is done in case of F110 ?
Please suggest..
Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

Is there any integration between Payroll and AP or Cash Management?

Hi All
Is there any integration between Payroll and AP or Cash Management?
Regards
Rahman

and that document refers to checkwriter as bridge between Payroll and Cash Management.
Q: But how many legislations have a checkwriter?
A: Only a very few.
So that is why i replied 'not really' in the beginning of this thread.

Is there any integration between pages and postal zip codes?

Is there any integration between pages and postal zip codes?

Yvan KOENIG (VALLAURIS, France) lundi 27 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
Please, for iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Is there a difference between AirPrint and printing via usb printer plugged into an airport extreme?

My printer does not show up in the add a printer option on my iMac when plugged into the extreme. I have a HP officejet 5610 All-in-One. I want to be able to print wirelessly using my Airport Extreme. Thank you

Is there a difference between AirPrint and printing via usb printer plugged into an AirPort Exreme?
Big difference.
AirPrint for one will not work via USB, so you will not be able to print from an iOS device like an iPhone or iPad using this type of connection unless you look at additional software....that may or may not allow this option.
Assuming that you get the All-in-One setup using the USB port on the AirPort.......only printing is supported.
You will not be able to use any other advanced features like maintenance, scan, copy, fax, etc when the device is connected to the USB port on an AirPort.
If you plan to use the HP for other things, I would strongly recommend that you connect it to your computer.
My printer does not show up in the add a printer option on my iMac when plugged into the extreme.
This usually indicates that your printer model is not supported. Check with HP Support to see if they have any updated Macintosh drivers for the 5610 that you could download and install that might allow this.
HP Officejet 5610 All-in-One Printer Drivers - Hewlett Packard

Is there a difference between Thrive and Excite power connector

Is there a difference between Thrive and Excite power connector? I am asking because there are a lot of Docks for Thrive 10" tablets....... If the power connector is the same, I should be able to dock my Excite 10" onto the same Dock, and purchase a similar poer adapter?
What are your thoughts - is it possible?

As far as I know AC adapter for Thrive uses 30W and Excite only 10W AC adapter.
Have you checked specification for both devices.

Is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

is there any differences between black and white ipod touch ?? only the color or there are hardware differences?

You're welcome.
What?
Sorry, but no. The parts are identical with the only difference being a white housing or a black housing.

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

you can link
OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

Logic Pro 8 not seeing MOTU Symphonic Instrument or MOTU Ethno Instrument

I've installed Logic Pro 8.0.2, MOTU Symphonic Instrument 1.1.3, and MOTU Ethno Instrument 1.0.1. Logic 8 does not recognize the MOTU plug-ins. The stand-alone MOTU apps work, MOTU Ethno Instrument.component and MSI.component are both properly installed in Library>Audio>Plug-ins, and both MOTU plug-ins are available in Garageband.
Are there any known issues with MOTU and Logic Pro 8?

invisibleman wrote:
I've installed Logic Pro 8.0.2, MOTU Symphonic Instrument 1.1.3, and MOTU Ethno Instrument 1.0.1. Logic 8 does not recognize the MOTU plug-ins. The stand-alone MOTU apps work, MOTU Ethno Instrument.component and MSI.component are both properly installed in Library>Audio>Plug-ins, and both MOTU plug-ins are available in Garageband.
Are there any known issues with MOTU and Logic Pro 8?
Sounds like a job for the Motu people.
What does Motu tech support have to say about this?

Is there an issue between EXSP24mkII and MOTU Symphonic Instrument?

Similar Messages

Maybe you are looking for