Is there an MSI version of 11.0.10?

If not, is there a way to package and roll out this version of Reader? I noticed on the Adobe site that the MSI versions disappeared after v11.0.0
Thanks
David

There is also a lot of useful information available for administrators for deployments:
Windows cmd line and msiexec — Enterprise Administration Guide

Similar Messages

Is there a new Version of Skype for Business?

Hi,
I'm using Version 5.0.32.152 of what I think is Skype for Business. It's an approved version of the Windows Desktop program for my workplace, but I can't login using the Microsoft account I created based on my work e-mail. I only have the option to login using my Skype Name (but I don't know what it is).
Is there an updated version for the Windows Desktop? I've spoken to my IT support team, but they suggested I reach out to the Skype Community about user names and account login details.
This is the start-up screen I see, and it isn' the same as the new look Skype for personal use.
Thanks for your help...Jonathan
Solved!
Go to Solution.

The latest Skype version is 6.14.0.104
http://download.skype.com/msi/SkypeSetup_6.14.0.104.msi
The corresponding business version is 6.14.32.0.104
http://www.skype.com/go/getskype-msi
The only difference between the "normal" and the business version is that the business version does not contain options for integrating with Facebook and Skype Updater service is not installed.

Resolutions in MSI version 44.03 drivers

I got my brand new MSI 5900U-VTD-256 card a few days ago, and its a superduper card. But when i installed the MSI version drivers it refused to let me choose any other resolutions then 800x600, 1024x768 and 1280x1024. Since I use 1152x864 as a standard I had to go back to the Nvidia version of 44.03. Is there anyone that knows a solution to this or will I have to stick with Nvidia? Nothing wrong with them, but I like using manufactorspesific drivers to get the most out of the card.

No, the pictures as completly fine except that my monitors dont support more then 60Hz from 1280x960 and up, and if you've tried 60Hz you understand

MSI version required!

Hi, can you please point me in the direction of the latest MSI version. I need this as I have to deploy to 1500 machines via SCCM. There used to be a link the main page but this seems to be gone now. Can anyone help?

The latest regular Skype 6.22.64.106 version:
http://download.skype.com/msi/SkypeSetup_6.22.64.106.msi
The latest Skype 6.21.32.104 business version
http://www.skype.com/go/getskype-msi

MSI deployment problem/previous MSI Versions or Uninstaller?

I'm attempting to deploy the latest Flash Player 11.3.300.265 MSI but almost every installation is failing. If I try to deploy the MSI manually on a problem workstation, I'm prompted for previous versions of the MSI. Apparently the older copy of the MSI we have on our file server doesn't match what's on some of the desktops, so I receive error 1714 and the installation fails. On workstations that have the same MSI version as what's on our file server installed, the new MSI installs properly as it's locating the previous MSI it needs. Apparently the newer MSI packages are dependent upon whatever existing MSI is currently loaded. So my solutions appear to be:
Obtain each previous MSI package from version 10 and up and rotate the version stored on our network file share. Each workstation will then eventually see the old version it's looking for to faciliate a successful installation of the new MSI.
Find an automated way to uninstall the current version of Flash Player and run this task ahead of the new Flash Player MSI deployment task.
Option 1 would require me to obtain each previous version we may have deployed. Is there such a file repository available?
Option 2 is something I've tried working on but have not been successful. The Flash Player uninstaller does not seem to work correctly. After running it I'm still prompted for the previous MSI at the original location it was deployed from. The Player is not listed in Programs and Features/Add-Remove Programs and the Flash directories in the Windows system folders only have the Flash log file and nothing else.
Any suggestions? Thanks!

Hi Todd
There is a "universal flash player installer" you can get it here : from http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe.
This uninstaller gets updated with each flash player release. You also need to get the current copy to uninstall the latest version of the flash players.
here are some notes I've placed in my script
REM WARNING a new copy of uninstall_flash_player.exe must always be used for every new Flash version.
REM from http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe
REM After downloading remove the "unblock" stream from uninstall_flash_player.exe
REM
This will get ride of all prevous version.
uninstall_flash_player.exe -uninstall
after this you can install the current version with the msi files.
Good luck.
Naim.

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

Unable to uninstall Flash 10.3 or upgrade to 11.0.1.152 ActiveX MSI version

I have one computer that will not upgrade to version 11.0.1.152 ActiveX msi. The computer currently currently has versionn 10.3 ActiveX msi and it had version 10.3 ActiveX exe also installed at one time.
I ran the Flash player uninstall available on the Adobe site for Windows. It uninstalled only the ActiveX executable install and not the MSI version.
I am not able to upgrade to any newer version using the MSI version. I get this error message "install_flash_player_10_active_x.msi is not a valid installation package for the product Adobe Flash Player 10 ActiveX.
If it's not valid then why is it available on the Adobe site?
All other Window XP computers are getting their updates from AD group policy and they are updating with no problem.
Looking for a fix here to either remove ActiveX 10 msi from this computer.

Well that didn't work. I tried installing the latest msi version. The 11.0.1.152 ActiveX msi version is not corrupted, it works on our computers. I need a way of completely removing this version that is installed. Adobe uninstall only deleted the executable version and the Plug-in version, leaving the msi version.
Once I get this 10.3 version completely removed I'm sure a clean install will work again coming from the AD group policy install. All the other PC's get these updates installed via GPP. I need the recommended manual removal of flash player I guess.

Is there a C version that does what the MAX 1-D Interactive does?

Is there a C version that does what the MAX 1-D Interactive does? Or a solution to the problem below.
I got the MAX 1-D Interactive to work with my stepper motor. The hardware setup is at the bottom.
I am trying to write a C program in Visual Studio 2010 to control a stepper motor. I found an example program called 1D Straight Line Move.c in
C:\Program Files\National Instruments\NI-Motion\Documentation\Examples\NI-Motion Help\C
I copied the example file and the needed .h, .c and .lib files into a Visual Studio project. I changed the velocity, acceleration, and deceleration to match the values in the MAX 1-D Interactive. The solution builds, but when I run it I get the following error message
Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a function pointer declared with a different calling convention.
Setup:
I am running the latest NI Motion Software.
PXI-7334 connected to UMI-7774 using I/O Motion cable
UMI-7774 connected to P70360 Stepper Driver using control cable
P70360 Stepper Driver connected to NEMA 23 (T21NRLC) using Orange (A-), Black (A), Yellow (B-), Red (B)
NEMA 23 is powered by 120V AC power supply
P70360 Stepper Driver is set using DIP Switches (I tried to use the P7000 software tool that came with it, but it never found the driver):
S1: 1
S2-1: Off
S2-2: On
S2-3: On
S2-4: On
S2-5: Off
S2-6: Off
S2-7: Off
S2-8: Off
S2-9: Off
S2-10: On
S2-11: On
S2-9: Off
Attachments:
1D Straight Line Move.c ‏5 KB

No I am not using Visual C++ MFC. I am using an empty C++ project in Microsoft Visual Studio 2010. Although I eventually want to create a .exe file from this project so I'll have change project type.
The motor runs using MAX to control it.
It did run using the 1D Straight Line Move.c project, but it gave me the below errors. That night I unplugged it because the stepper motor gets hot. The next day MAX still moves the motor but the 1D Straight Line Move.c project doesn’t and I still get the errors below.
I am getting two errors: (I was getting the same errors yesterday)
Run-Time Check Failure #2 - Stack around the variable 'errorCode' was corrupted.
Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a function pointer declared with a different calling convention.
I think the errors come from using the functions in flexmotn.h. The functions look like they are being used correctly, but I can't find where they are defined. They are probably defined in FlexMS32.lib.
I attached the files I am using.
I haven’t tried any of the other examples. 1D Straight Line Move.c looks like the simplest and closest to what I want to do.
Attachments:
Files.zip ‏82 KB

I'm trying to upgrade 9.0 academic version to 9.1.7 to use on a new MacBook pro. When I try to do incremental upgrades to 9.0.1 or 9.0. it says I don't need them. When I try to upgrade to 9.1.7 it says there is no version eligible to upgrade.

I'm trying to upgrade Logoc Pro 9.0 academic version to 9.1.7 to use on a new MacBook pro. When I try to do incremental upgrades to 9.0.1 or 9.0.2 it says I don't need them. When I try to upgrade to 9.1.7 it says there is no version eligible to upgrade. This all on the older MacBook currentlu running 9.0. But I need to upgrade to 9.1.7 to transfer it over tp the new MacBook w/ Retina display.

I think I just got it. I had the actual Logic Pro.app in a folder called Logic Pro inside the applications folder. When I moved the actual app out of the folder and into applications it worked. I am in the process of updating now. However it seems a little strange because that's how it installed from the discs - into a folder named Logic Pro within the applications folder. I would never have figured that out on my own. So thanks for those who posted solutions to other users similar requests.

I have Windows 7 and was wondering if there was a version of Firefox called "Nightly"? The File type of a Nightly.Ink. Also, every time I open "Nightly" now I g

I have Windows 7 and was wondering if there was a version of Firefox called "Nightly"? The File type of a Nightly.Ink. Also, every time I open "Nightly" now I get a program update popup and it says "update.exe". Is this a part of Firefox "Nightly" or is it a virus? Please answer this so I can relax. My email is [email protected]

There is a version of Firefox named Nightly, but most people do not have it installed. Currently:
* Firefox 24 (released)
* Beta (future Firefox 25, subject to some changes)
* Aurora (future Firefox 26, subject to many changes)
* Nightly (rapidly evolving future Firefox)
I can't answer your detailed questions about Nightly, however, please make a backup of your profile before removing it, if you remove it, as some users have reported losing all their personal data when doing that.
* [[Back up and restore information in Firefox profiles]]
* [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]

Is there a network version of Adobe Acrobat Pro 9?

Is there a network version of Adobe Acrobat Pro 9? If not, are their volume licenses available?
What additional adobe products need to be purchased in order to run Adobe Acrobat 9 on a network?
Is there a licensing system that allows, for example, 4 licenses to be purchased that allows any user on the network to use Adobe Acrobat Pro 9 so long as only a maximum of 4 users are using Adobe Acrobat Pro 9 at any one time.
Thanks

Graffiti's right, there is volume licensing available for most any Adobe product, where you get a single activation key for multiple systems and are able to administer your license via an easy web-based tool, plus you also get a price break on the order...
But you don't necessarily have to call Adobe Sales for pricing, as there are now online volume stores open in Europe, the UK, and North America, with no "signature" contracts to sign.
And oddly enough just for Acrobat, Adobe's got a volume special offer on now through most of April – buy 4, get 1 free.
Also wrote recently about this exact question - http://prodesigntools.com/products/adobe-volume-licensing-program.html
Hope this helps!

We use a plugin Adobe Acrobat NPAPI Plug-in Version 10.1.2 on a Mac to get the pdf to open in a browser window. Is there a later version or other method ?

We use a plugin Adobe Acrobat NPAPI Plug-in Version 10.1.2 on a Mac to get the pdf to open in Acrobat and the pdf display within the browser window, as within our Online artwork Approval system we use the Acrobat Annotations server to annotate pdfs and publish to the server
But we can no longer get this plugin to work! Is there a later version ? or is there another way of forcing the pdf to open in a Acrobat Reader application (not the Mac viewer) within the browser and not open another window to display the pdf in Acrobat?

The latest version is 11.0.6. Whether that's available to you depends on the version of Mac OS you're running.
* http://get.adobe.com/reader/enterprise/
See the following articles.
* [[PDF files are blank or cause an error message on Mac]]
* [[Use the Adobe Reader plugin to view or download PDF files]]

Is there an older version of iPhoto I can download to osx 10.4.11?

Is there an older version of iPhoto I can download to osx 10.4.11?

iLife 06 might run under 10.4 on an eMac. It's requirements are listed here: iLife '06: System Requirements. Look for a copy of either at Amazon.com or eBay.com.
OT

Is there a "pro" version of QuickTime Player 10?

I'm still using QuickTime Player 7 Pro. Is there a "pro" version of QuickTime Player 10?

Screen recording? How does that work?
Question is unclear.
QT 7 Pro does not have a "screen capture" option.
Screen capture software apps divide CPU power between processing/rendering of the screen and processing/capturing the rendered data. In the case of most apps, capture routines have a targeted data data dependent on the quality setting, CPU power available and area to be recorded. Thus, larger recording areas and CPU intensive processing tend to decrease the frame rate of the captured "scratch" file but retain a relatively consistent level of quality for each frame which, in turn, may effect the final output,
Many users, especially those having older, QT 7 Pro only operating systems, elect to purchase third-party screen captures that allow the capture of both system, line input, and/or mic audio, as well as, capture at full screen, "object" window, or user selected portions of the screen. While there may be some free capture software still available for download, most users opt for commercial apps which offer additional features usually targeting specific user workflows. These may range for simple apps like the Araelium ScreenFlick ($29) to intermediate apps like Ambrosia's Snaps Pro X ($69) to combined capture/tutorial editor apps like Telestream's ScreenFlow 4. (I would normally advise potential screen capture app users to research and try out the various applications that are available to see what best suits their individual needs.)

I see that a lot of people like to use handbreak, is there a PC version?

First of all, is it ok to talk about that stuff here on the apple forums, and if it is, I checked the website and it said they were working on a PC version, but is there any PC version equivelant that anyone would recommend?

Have a read
http://discussions.apple.com/thread.jspa?threadID=412056&tstart=0

Is there an MSI version of 11.0.10?

Similar Messages

Maybe you are looking for