Is there an option for Coverflow on your IPOD?

When you transfer just one song from ITUNES,do you have to have the cover for that song on your IPOD or is there a way not to have it? Albums are good but a cover for one song .............Well.....

Is there an option for Coverflow on your IPOD?.
On newer iPod, yes.
When you transfer just one song from ITUNES,do you have to have the cover for that song on your IPOD or is there a way not to have it? Albums are good but a cover for one song .............Well.....
Why wouldn't you have cover, even if it's only one song?

Similar Messages

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?

Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry

Is there an option for current customers?

is there an option for current customers to keep their current plan when upgrading device after june 28? currently i have a family share plan with no data. when i upgrade, can i keep my current plan and add the $30 data or will i be forced into the hideous shared plan?
someone from another post said this:
You're not required to move to Share Everything but if you do, unlimited data will not be retained on your line. As a Verizon Wireless customer you have choices when you upgrade at discounted pricing. You can choose from a standalone data package starting at $30 for 2GB or a Share Everything Plan. If keeping unlimited is important to you, you can choose to upgrade and pay full retail price for the phone
can anyone confirm? the catch is i don't have data in my current plan. wonder if verizon will force to the new craptastic tiered data plan?

I have spoken to VZW 3x today, and the final answer is you are either required to move to one of these plans when you "upgrade" your phone, or leave it as is and pay FULL PRICE for your next phone. That $200 iphone you have had your eye on will now cost you $650 if you want to keep your unlimited data. I currently pay $64/month for 450 minutes, 200 text messages, and unlimited data. I called and I was SOOOOOOOO MAD, but I was nice on the phone, and after 4 hours, I had an answer. If I move to the new plan (yup, losing my unlimited data, and will be relegated to the 1GB/month), I will be charged $90/month, but that does not take into consideration my employee discount I currently receive. With that discount, my cost goes to $66+tax. So while in dollars and sense it sounds good, that is only if/when I stay under 1 GB data. The second I go over, I pay $10 for the next GB.
I requested an early upgrade (I am due 8/15/12), otherwise I am gone. I am sure the answer will be no, but that is OK. 10 years with them is not enough to keep me, especially if they won't bend.

Are there other options for renting and downloading movies?

I have watched movies downloaded from Apple a couple of time, but I really don't like the iTunes interface - my main complaint is that there is no way to filter movies so that I can quickly scan for rentals.
I rarely watch any movie more than one time, so I have no interest in buying a movie - I only want to rent, and it is a huge waste of time to hunt through iTunes movies one by one to see if I can rent it or not. It just not worth my time.
I don't know if Apple plans to fix this shortcoming or not, but until then, are there other options for downloading rental movies to watch on my MacBook Pro or my iPad? Online streaming is fine, and I use Netflix and others for that, but I would like to get movies to watch on airplanes and other places where I don't have an internet connection.
Thanks

Try NFS. SMB is for connecting to Windows servers.

Why is there no option for the voice over feature to be available for iBooks only?

Why is there no option for the voice over feature to be available for iBooks only?

Hello,
We are aware if the 'black box' issue with the shim installer (downloaded from get.adobe.com/flashplayer), however, this should not be the case with the full installer. The links for the full installers are posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

I have not had any experience in getting any devices repaired so I'm not sure which store to resort to. An official Apple store should more than likely get you what you need, but I'm guessing it's probably more expensive. (if any cost for your situation)
I hope you get your problem resolved.
~Lt. Leviathan

Is there an option for this?

hello people =D, when i´m importing tables into a new tablespace, what option can i use so that when it´s importing all the data, it starts with the tables that are "heavy" , and then continue on with the little ones?, or when it finishes, I look at the tablespace map, and I see a group of complete datablocks scattered without order across the tablaspace, is there an option in the import command, that avoids this kind of issue? so when it finishes and when I look at the tablespace map, it shows all the data in one place and the freespace in another? kinda like when you do a defrag on a hard disk... any pointers would help =D and thankx in advance for your replies and opinions =D

what option can i use so that when it´s importing all the data, it starts with the tables that are "heavy" , and then continue on with the little ones?, If you're doing an export at a TABLE level, specify the order when "exporting". If you're doing it at a USER level, try precreating the schema by exporting with ROWS=N. then once the schema is built, import from a 2nd export where ROWS=Y and you've used the TABLES=... parameter to specify the order.
I see a group of complete datablocks scattered without order across the tablaspace, is there an option in the import command, that avoids this kind of issue?When EXPORTING specify compress=y. This will try to compress data into one extent on import.
HTH

Is there any option for voting on a list item in SharePoint 2013?

Dear All,
I am looking for a feature vote a for list item from multiple users and need to show consolidated results on that.
for SharePoint 2013 we have "like", "rating" by using these can we show the consolidated results.
otherwise is there any alternative for this.
Thanks & Regards,
Jithendar

I haven't seen any OOB vote feature in sharepoint list. It's better to go with "like" or "ratting" options.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

Why is there no option for a Black ipod anymore/ I've seen the option on other websites, but this website no longer has it. And if I get the Black iPod Touch from another website, will it be old and IOS 6, because the option went away long before IOS 7

I want a Black iPod Touch Fifth Generation, however I do not see an option for it. I have seen the option before, but it is no longer there, just like the option for a White iPod Touch. I still see the option for a Black iPod on other websites, such as Amazon. I wonder if it will not be updated and slower if I buy it from another websites that sell a Black version, because I think Apple might have eliminated that option for the iPod Touch Fifth Generation.

No there is the option for a black iPod touch 5th Generation. However, they call it Space Gray now. It provides a black front screen and a slightly gray colored aluminum on the back.

Is there an option for 480p ?

I notice on Apple's HD gallery that the choices are 480p, 720p and 1080p. I am creating my movies in 720p with Apple intermediate codec in FCE HD but exporting to 960 x 540 and 640 x 360 resolutions with H 264 codec in Compressor. These movies are for computer and web viewing only. Where do I find the option for 480p in Compressor?

On Apple's Quicktime site, halfway down on the left is the HD Gallery catagory. All of the movies are in three resolutions, 480p, 720p and 1080p. Most all of the 480p movies have a resolution of 852 x 480, a few are 960 x 540 which is the resolution I have been using in Compressor. Am I right is assuming 480p will result in smaller file sizes? Also, I was curious about why it is 852 rather than 960. My work in FCE HD and Motion is all graphic content imported from Illustrator and Photoshop, no video, so perhaps this has something to do with the camera resolution?

How fast is coverflow on your iPod Classic?

Hi all
I am new to iPods, having only just recently bought a Classic 160GB.
When I scroll through coverflow (and also when scrolling through Artists/albums), if I go too fast I get the standard photo of a musical note and have to wait a second or two (maybe three) for the artwork to appear. I wondered if this is the same for everyone?
Cheers

Hi....I have same problem too, so contacted support who advised me the facility has now been removed. So frustrating! This is the copy of the email reply I received. I have sent feedback as he advised me to do, so maybe others should do the same, and hopefully they will rethink
Dear Carol,
Welcome to iTunes Store Customer Support. My name is Raghu.
I understand that you are concerned, as the search for music on the iPod is no longer available on the iTunes 11 version. I am glad to assist you with this issue.
Carol, please be advised that this feature has been removed from the latest version. I apologize for the inconvenience caused. However, I request that you submit a feedback about including this feature back as Apple recognizes that no one is better qualified to provide feedback about iTunes than the people who use it.
I encourage you to use the iTunes Feedback page to submit your comments:
http://www.apple.com/feedback/itunesapp.html
Your efforts to share your feedback are very much appreciated.
Thank you for being a valued customer. Have a great day!
Sincerely,
Raghu
iTunes Store/Mac App Store Customer Support
Please Note: I work from Sunday - Thursday, 06:00 AM to 03:00 PM CST
Hi there. I am hoping you can answer a question for me regarding the recent update to iTunes. It seems I can no longer search my iPod for music, only the library, which I keep very little music in. This facility was very useful, and I am hoping it is a glitch that will be fixed, and not a permanent change to the programme.
I would be grateful for any information you can give me

Is there any way to get into your ipod through itunes and be able to unlock it with your passcode?

I dropped my ipod and now the bottom half of my screen isnt working too well and I can't get my lock to slide over to the right to try and type in my passcode, so I was wondering if there was a way to unlock my ipod from itunes and be able to take the passcode off so it is easier for me to get into my ipod. Or if there is an easier way to kind of reset the passcode part without resetting the whole ipod. Or if i should just buy a new ipod..

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT1212 i was wondering if there is any way to unlock your ipod without restoring it?

i was wondering if you could unlock your ipod without restoring it?

Sure. You can go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc.) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Why isn't there an option for new tabs to open to your homepage?

This was an option in previous versions of Firefox. What sense does it make to remove functionality?
I don't want to have to middle click my home button, and it's absolutely ridiculous to have to install an extra addon to restore basic features that were included in versions that came out 5 years ago.
What's the deal?

Here is the newest iteration of an addon that "fixes" this missing feature-
https://addons.mozilla.org/en-US/firefox/addon/my-homepage/
Of course, just like all the others before it, it will eventually break the functionality of itself or another addon in some way or form and we will once again have to find a replacement that restores this very basic feature which other browsers have implemented but Firefox has taken away.
I never gave Chrome or any other browser the time of day because I never needed to, but since Mozilla devs are removing basic features that people want and continually refusing to re-implement them (due to stubbornness or stupidity, 7 years in the making) it's beginning to sound like a better alternative every second.

Is there an option for the history such that it categorises your history into folders (one for each website, eg. one folder for Google, one for MSN, one for Youtube etc.).

Internet Explorer does this, and it's much better than having to sort through hundreds of separate URLs.

You can open the History in the sidebar (View > Sidebar > History) and click the View button and select "By Site";
See http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

Is there an option for Coverflow on your IPOD?

Similar Messages

Maybe you are looking for