Is there an OS 2.1 Change Log?

Does anyone know where there is (or IF there is) a change log for OS 2.1?  Seems like we should be able to consult that if we want to know what changed.  Before the update, RIM had released some information that suggested that Print To Go with OS 2.1 would no longer require the Playbook and the PC to be on the same network.  This appears not to have been made part of the final update. 
But rather than issuing a "oops...sorry" or even a complete lits of what is new, we get....silence.
For me, Print To Go is basically useless until we have this change, or at least until you can us it with the Playbook connected to the computer via USB.  Anyone else?  Is it asking too much to have a roadmap?

Check the link the second post in this thread.
New OS 2.1.0.1032 is available
and here:  http://bizblog.blackberry.com/2012/10/playbook-os-software-update/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • How do we chcek change Logs for any stndrd transaction

    Hi gurus,
    Are there any tables to check change Logs for any SAp standard t-code ?
    Thanks
    Kylie

    ALex ,
    For eg :if its a t-code related to Purchasing : then Purchase Order and it's corresponding item level details are retrieved.
    But i m thinking in a different way: i need to check LOGS of a t-code which might have a transport request
    following such a transport request i can get the USER details who migrtaed the changes of t-code (for eg:ME23n)
    from SAP QA to SAP PROD.
    Thanx
    Kylie
    Edited by: kylietisha on May 31, 2010 8:15 AM

  • Change logs for Z table.

    Hi All,
    I am trying  to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
    SCU3 is the standard transaction to see the change logs for all the tables.
    Is there any table where the change logs values are maintained?
    Does anyone know how to get the change log value?
    Thanks in advance.
    Regards,
    Amruta.

    Hello,
    If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
    Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
    Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
    For table logging you need extra system parameters to be set, they are explained in SAP Note:
    Note 1916 - Logging table changes in R/3
    Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
    To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
    In your specific scenario I think it is best you go for the change documents with SCDO.
    Wim Van den Wyngaert

  • User changes in tab strip ui element are not recorded in context change log

    Hi All,
    We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides  tab strip ui element. User changes to this input field are getting recorded to the context change log.
    Is there any restriction on context change log usage with tab strip ui element?
    Could you please suggest If there is any way to record changes inside tab strip ui element.
    Thanks,
    Sudheer.

    I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
    [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

  • How do i know change log deletion is happening or not

    I have whole bunch of DSO's mentioned in the process chain which deletes change log entries evryweek. Now somebody raised that couple of change logs in the PC are not deleting. I have checked that process chain last ran in 24-feb FRIDAY and there are abviously entires in change logs as we are having new requests coming in everyday.
    Is there any way that I can check and 100% confirm whether those change logs in question have deleted to 0 after feb 24thFriday(PC last ran) or not. please suggest whther i would be able to know now other than waiting till next friday and see if deletion is happening or not.

    Ramya
    DSO --->Manage -
    >Environment -
    >Delete Change Log Data
    Here you can either give number of days or a date before which change log should be deleted.
    But when you execute this option do you see one check box Only Successfully Booked/Updated Request
    a)Is this checked and disabled? If yes, check how many targets gets data from your DSO ( Display Data flow will give you that) . Update all those target from this DSO.
    b) If not checked, just try to delete anything before 25 Feb..so 24th onward everything should be deleted.
    After you input the date, press Start -
    > and then Job . Job log will show whether it was delete properly or not.
    Before deletion check the number of entries in Change Log table and do the same after deletion.  This will tell you whether deletion was successful or not
    Regards
    Anindya

  • Change log of customer filled with garbage with inbound ADRMAS IDOC

    Hi gurus,
    when i process inbound IDOC ADRMAS for updating customer addres then Change log of customer filled with garbage.
    the idoc is having FAX segment PAGER segment etc etc and if no data change even then there are many entries in change log with Delete..
    Please help..
    regards

    Hello,
            If it is a Custom Posting Program, please verify that your code is clearing the Log before it takes in any new content.
            Also, check the Data and try posting it again.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • Is there any kind of change log for UME?

    Is there any kind of logging of changes to users or roles in UME?  We are on GRC 5.3 SP13.
    We have a strange situation in our production RAR system.  The Change History shows some changes where made to a function on 7/8.  However the userid indicated by the Changed By field currently shows as not havig access to make function changes in production.
    They can make function changes in test, so I thought maybe they did an Rule Import.  However they don't have the access in production to perform the Rule Import either.  Also, the Change History in the test RAR system does not show any changes to the function in question by this userid on 7/8.
    I am assuming that if you did a Rule Import and brought over the Change History records, the date on these records would be the exact same as shown in test.  (i.e. they would show the date when the function change was made in the test system, not the date when the Change History was imported into production)
    Also the Change History shows the last Rule Upload was on 7/2, and the last Rule Generation was also run on 7/2.  This would seem to indicate that no one else performed a Rule Import on 7/8 either.
    Any ideas on what happened?
    The only thing I can think of is that this user did have the access back on 7/8, but that it has since been removed.  But I don't have a way to prove this.
    Thanks.

    Hi Bob,
    Looking at your explanation, it seems impossible situation. How ever I remember in early patches of GRC AC 5.3 there was an issue with RAR change log. The change history would show wrong IDs in Function/Risk change.
    That was fixed in patch 9. Not sure whether the same issue is returned again.
    Regards,
    Sabita

  • Is there any change log for query change in BIW?

    Hi Buddies,
    Could you please tell me if there is a change log in BIW to record all changes made to query and workbook? Since yesterday, I found a very important query had been deleted from our BI system, but I did not who had done this.
    Thanks in advanced.
    best regards
    Patrick

    Unfortunately there isn't. Check if you have the query in another system (test, development) and transport it again. You could also check if there is still an entry in RSRREPDIR but I don't think so.
    Best regards
    Dirk

  • Is there any way to download/print/export the CUP Change Log?

    Does anyone know if there is a way to export, download, print, etc. the CUP Change Log report?  We are on GRC 5.3 SP13.
    We have just started an audit review and the Auditors are asking for a report of all changes made since 10/1/2010.  I can generate it on the Configuration/Change Log/Search Change Log screen but it doesn't seem to have any export/print options.
    If this is not possible, does anyone know what tables make up the Change Log?  I may be able to give them a report off of the tables.
    Thanks.

    Hi Bob,
    by default there is no export feature for that one.
    To find the right table I only see that you would need to query the tables for one of the entries to find the right one as there is no official DB structure published.
    Best,
    Frank

  • Is there a reviewable change log for Creative Cloud updates

    This morning I received a Creative Cloud notification: "A new version of Creative Cloud is available. Update now?". Is there a log that tells us what has been modified so we know what is being installed? I prefer to know whats going on with my machine than just accepting any and all action buttons.
    Thanks in advance for your help.
    MJ

    Thank you Jeff. Have a great day!
    Re: Is there a reviewable change log for Creative Cloud updates <http://lycos.com>    *Michael
    Jordan<[email protected]>
    |  Designer**
    <Removed by Moderator>

  • About changing my security questions' answer, I logged into my apple Id but there is no option of changing that...

    about changing my security questions' answer, I logged into my apple Id but there is no option of changing that...

    If you can't remember your current answers then if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the option to send reset info won't appear, and you won't be able to add one until you can answer 2 of your questions. In which case see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • Is there any Security or Change Log for Shockwave Player 12.1.3.153 available?

    I haven't seen so far any Security or Change Log for Shockwave Player 12.1.3.153. Given the Update ID SW12-13153 this seems to be an ordinary update (not a security hotfix with the prefix APSB...). Has anyone seen a change log?
    Thanks.

    As always: no.  The last Security Bulletin issued for Shockwave Player was http://helpx.adobe.com/security/products/shockwave/apsb14-10.html (March 13, 2014).

  • Change Logs for TCODE -- FILE

    Hi Friends,
        Please help me in finding the change logs  for the TCODE  FILE,
        i.e  The changes made to the Logical paths
       I had tried  Utilities---->change logs , but unfortunately i cannot find any changes logs
       But there are changes made to the logical paths in my system but i cannot see them in change logs
    thanks
    chandrasekhar j

    rec/client is a profile parameter, you can view the settings in transaction RZ10.  However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value.  Also if you double-click on a parameter you can get to the full help text for its meaning.
    The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
    Hope this helps.
    Nick

  • Filled fields become blank in DSO change log

    Hi experts,
    I find an unusual behavior in DSO activation.
    For some records for which I find in PSA, new data table (and in debug also!!!) correct data, when the request is activated I find in change log table all characteristic fields empty; the key fields and key figure fields are ok and correct in all tables.
    It happen randomly for some orders and for a few requests.
    It happen when I have one storno record, for example:
    PSA (order, item, customer, material, storno, quantity)
    10000, 10, AAA, YYY, , 25
    10000, 10, AAA, YYY, X, -25
    DEBUG (order, item, customer, material, storno, quantity)
    10000, 10, AAA, YYY, , 25
    10000, 10, AAA, YYY, X, -25
    CHANGE LOG (order, item, customer, material, storno, quantity)
    10000, 10, AAA, YYY, , 25
    10000, 10, , , X, -25
    ACTIVE DATA (order, item, customer, material, storno, quantity)
    10000, 10, AAA, YYY, 25
    In some other cases:
    ACTIVE DATA (order, item, customer, material, storno, quantity)
    10000, 10, , , -25
    Have you some ideas? It is very strange.
    We are on a 7.0 BW system, but with 3.5 data flow (update rule).
    Thanks in advance.

    Vito,
    This happens some times...
    1. Did you transport any change to this DSO where characteristics were added and are these the ones that are blank...
    When this happens - see if you can clear the change log ( if this is an option ) and then reactivate the cube.
    Also there is a program to regenerate the activation program, I am not able to locate this - but then usually reactivating the ODS will usually clear this issue because it regenerates the activation program.

  • Need suggestion to get data from change log table of ODS.

    Hello,
    There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
    Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
    While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
    Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
    I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
    Please let me know if you have any suggestions.
    Regards,
    Sanjay Chaurasia.

    Hi,
    You can use the changelog table of the DSO.
    Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
    In the update rule Routine, give the tech name of Change log table instead of Active table name.
    Hope it helps.
    Krishna

Maybe you are looking for