Is there an update available for an IMac G3 with OS X running 10.3.9

I have an old IMac GE running OS X ver. 10.3.9 build 7w98.  Are there updates for this OS or should I and can I update to a newer  OS?

G3 iMacs with tray-loading optical drives, and slot-loaders with 350 mHz processors max out at OS 10.3.9. If it has a 400mHz or faster processor, it will support up to OS 10.4.11 "Tiger." However, you may need more RAM for effective performance. Models taht supoprt Tiger can handle up to 1GB RAM; for most people 512MB RAM will run Tiger fine on a G3.
So this boils down to the question, "Which iMac do you have?" Probably the easiest way with an older Mac is to use this website's tool that translates a serial number to a model name:
http://www.everymac.com/ultimate-mac-lookup/
If you do not want to enter your serial number there are other identifiers you can use. They are explained on that page.
True retail install versions of Mac software like Tiger are still in high demand. As Apple no longer sells old OS versions, you are at the mercy of the open market and some copies may cost 2-4 times the current value of a G3 iMac, so be forewarned.

Similar Messages

  • TS3485 I have Mac os x version 10.5.8 why is there no update available for imac

    I have iMac Mac os x version 10.5.8
    I just bought a iphone 5 and the phone tells me it needs itunes 10.7 or later to sync with my imac.
    There is no software updates available for my imac os x or itunes so i can sync the iphone 5 with my imac.
    Is there any available else where ?

    woolfy81 wrote:
    I have iMac Mac os x version 10.5.8
    If possible you need to Upgrade your current OS X  to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes...
    You should now be able to Sync your phone.
    Be sure to make a Backup of your Current System Before Upgrading...
    woolfy81 wrote:
    I just bought a iphone 5 ...
    iPhone 5 Syncing
    Syncing with iTunes on a Mac  requires:
    Mac: OS X v10.6.8 or later
    From Here  >  http://www.apple.com/iphone/specs.html

  • I purchased Creative Suite 5.5 two years ago and never installed it.  Can I now load this on either a new Mac or PC?  Will there be updates available for this software?

    I purchased an upgrade version of  Creative Suite 5.5 two years ago, but never installed it on my PC.  I plan to purchase either a new Mac or PC soon.  Will I be able to load this upgrade 5.5 on my new computer and get existing updates?

    You will have to install it on the same type of platform for which you originally purchased it... Windows or Mac... suites are platform specific, and CS5.5 is not eligible for a platform swap.  Whatever updates exist for CS5.5 will be available to you, but it is not likely that there will be more produced.

  • Is there Java API available for third-party integrations with SCCM 2012? I went through the "Developer's Survival Guide", and it seems that SCCM 2012 SDKs only support C# and PowerShell

    Hi All,<o:p></o:p>
    My team and I are developing a software using java that works closely with IT management software such as SCCM. Our software will be highly dependent on data stored in SCCM. Basically
    our software will talk to SCCM to get information about a system managed by SCCM. To be able to do that, our software needs to use a java API that talks to SCCM. Is there a java API for SCCM 2012 that we can use? If there is not, what is the work around to
    this issue (integrate a java project with SCCM SDKs)? Any help is appreciated! Thanks!<o:p></o:p>

    Hi,
    As you mentioned, it seems that there is no available Java API for SCCM .
    Just curious, what's information you want to get from SCCM.
    Based on my experience, you could query the SCCM site database to get almost all the information.
    Otherwise, your question seems to be related to SCCM 2012. You may also choose to post there to get more effictive help.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Is there any updates available for Acrobat 7.0 to be used with Vista?

    It seems to be an uncompatibilty with Vista that I acquired yesterday. No problem with XP but struggling with Vista. A guy in Dublin over the phone (when I registered the product) said it was not compatible and that is it. No solution he was aware of. The message given as a code error is 93: -2 or a window appears in Acrobat saying:
    HKCMD.EXE and IGFXTRAY.EXE - BAD IMAGE
    C:/WINDOWS/SYSTEM32/IGFXRES.DLL IS EITHER NOT DESIGNED TO RUN ON WINDOWS OR IT CONTAINS AN ERROR.
    The suggestion is to desinstal and reinstall software. I have tried this but still the same problem. I have tried so many times that I could not activate the software automatically over the internet - so called this guy in Dublin...
    I reckon that the suggested update to Acrobat 7.0.1 is not good as when installed, repeated error messages come up! I am reluctant to try to download it again just to try because I am scared that I will have to call Dublin again to activate the software...
    Any suggestion on the above?
    Thanks guys.

    Starting here http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    You could click the individual update links to read the descriptions of what is included in each update
    The current version 9 is designed for Vista (as well as XP)
    As far as I know, version 8 would work with Vista AFTER you applied the updates

  • Is there any BAPI available for sales order creation with reference?

    Hi Experts,
    My requirement is to create sales order with reference for order type.
    Now my billing document number already contains the two items
    one is correct and another is zero quantity.
    I want to create order with reference of billing document but not with zero quantity item.
    Which BAPI I should use and what to pass to ignore zero quantity item?
    Regards,
    RH

    Hi Ronny,
    Try using BAPI_SALESORDER_CREATEFROMDAT2
    Regards,
    Shraddha

  • How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store.

    How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store. 

    Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

  • I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

    I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

    Dear Katty,
    Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
    https://discussions.apple.com/thread/3374419?start=0&tstart=0
    https://discussions.apple.com/message/16628399#16628399
    Do you have an idea of how can I solve this problem?
    Thank you very much again.
    Best regards,
    Alfonso

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

    I received a notice that there is an update for my Lightroom 5. I have the non-creative cloud version. Is the update available for non-cloud users? It says to download click the link and it takes me to Cloud free trial screen.

    It is the same installer. You can run it as 30-days trial (CC version) and decide later for CC or stand-alone. To license as stand-alone, follow this guide.
    If you already have the LR6 license key, you can enter it during setup and do not need to follow the guide.

  • HT4623 Hi, I have an iPod touch 2G with an iOS of 4.2.1 and there are no updates available for my device, I want to download an older version of iBooks that is compatible with my device. Pls what can I do?

    Hi, I have an iPod touch 2G with an iOS of 4.2.1 and there are no updates available for my device, I want to download an older version of iBooks that is compatible with my device. Pls what can I do?

    - The 2G iPod can only go as high as iOS 4.2.1. It does not have the hardware to support a higher iOS version.
    - Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    - You can only download the current version from the App store.

  • HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    No.
    You must restore.

  • Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac?  thank you!

    Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac?  thank you!

    THank you very much, I I have a ton of Adobe programs on my mac and i think a Cuda driver update was installed with it, it just popped up the other day in my system settings and is asking to upgrade my graphics card, but i don't have the same card as this update... so i thought i would double check! thank you again.

  • Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

    Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

    Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
    (108187)

  • I currently have Iphoto v. 9.1.4.  There is an update v. 9.4.3 that I am unable to install.  I keep getting a message, "you have updates available for other accounts.  To update this application, sign into the account you used to purchase it."

    I have iPhoto v 9.1.4.  Update available is 9.4.3.  I keep getting this message:  "You have updates available for other accounts.  To update this application, sign into the account you used to purchase it".  I have done this and I keep getting the same message over and over again.  Please help me!

    Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
    1. Follow the instructions in this Apple Support article.
    2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
    3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
    4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
    5. Triple-click anywhere in the line below on this page to select it:
    /Library/Caches/com.apple.appstore/adoption.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
    Then repeat step 4.
    6. Select
    Store ▹ View My Account
    from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
    7. Launch iTunes and select
    Store ▹ Authorize This Computer
    from the menu bar.
    8. If you've moved any App Store apps out of the Applications folder, or into a subfolder, put them back. Never move or copy those applications. If you have backup copies of the apps on another volume, unmount it and try to update again.
    9. Contact Account and Billing Support.

Maybe you are looking for

  • Posting of CarryForward New general ledger

    Hi financial wizards, our client uses new general ledger. The accounting block has been extended with some ZZ user fields carrying results determined via substitution exits during posting. The additional customer fields are added to the accounting bl

  • Help with exporting to an Excel spreadsheet

    Greetings! I would first like to say that I am a student working on a data acquisition system for a company I have an internship with.  I have used LabVIEW in classes a lot but have very limited experience in creating VIs on my own (this is the first

  • Connecting to HD LCD?

    I have an old G4 that i hooked up to a phillilps 47" 1080p display. The G4 recognizes the resolution and the picture looks great, but the edges bleed off the screen. So the top bar is not visible and only half the dock is visible. Does anybody know h

  • MIDLET working fine in emulator but not working on mobile!

    hi, i have an application which sends http request (get), it works fine in an emulator but when i install that application onto P900 sonyerricson it doesnot send the request and after sometime gives symbian os error:-33 pls. let me know the solution!

  • Sourcing UNIX Classpath in Java code

    Hi All, I was wondering where I could find a sample of how I can source the CLASSPATH value in UNIX in a java program. I want to write a program that can retrieve the value of the CLASSPATH or any other UNIX variable. If I set something like export $