Is there an update that addresses the different rending in photos between Library & Dev modules?

The changes that I have made in the Development module are not reflected in the rendering of the photo in the Library module. Is there an update or guidance that addresses this difference in rendering?

What differences are you seeing?
There is a slight difference in the way sharpening and noise reduction are shown. Briefly: in Develop Module, sharpening and noise reduction may not always be fully rendered except at 100% view (this, I understand, is to save rendering time - you can't judge sharpening and noise reduction except at 100% anyway). They are shown in Library Module, as they need to be rendered only once between edits (and the rendering is saved in the previews).
If you are seeing any other difference - especially a difference in colour - that may indicate a problem with your monitor profile.
Is your monitor calibrated and profiled - with a hardware tool (ColorMunki, Spyder etc)?

Similar Messages

HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confuse

I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.

To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X

HT5312 forgot answers for security questions, my apple account has updated email address but the rescue email address for account is old and not accessible - do not know how to update that address so i can authorize new devices...

forgot answers for security questions, my apple account has updated email address but the rescue email address for account is old and not accessible - do not know how to update that address so i can authorize new devices...

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple throughiTunes Store Support.

When will there be an itunes update that resolves the compatibility issues with windows 8

When will there be an itunes update that resolves the compatibility issues with windows 8

I hadn't heard there are issues. Can you tell me what the issues you have run into are? I just downloaded it yesterday on my new laptop and I am having issues syncing today...

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

None of the spreadsheet apps that work with Excel files offer anything like full native support in iOS. Apple's own Numbers app pairs down features for the iOS version. The hardware is simply not up to what a true computer is capable of, so all apps like QuickOffice, DocumentsToGo, Numbers and so forth offer reduced features from their computer-version counterparts.
I think a custom app will be your only real choice, be it a fully standalone app, or something built in filemaker or some other db-based platform.

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

Is there a BAPI that gives the status information (and possibly more) of a

Hi All,
We are using an external document image system where we scan and code vendor invoices. They are send to our SAP system via a BAPI.
We want to update the status of the invoice in the document image system from the status in the SAP system, so whether it is still open or has been paid and cleared. Is there a BAPI that gives the status information (and possibly more) of a specific vendor open item?
Regards,
Gerrit

Are you sure about that? Several highly regarded, widely downloaded apps, e.g., eReader, have an option to hide the status bar. The developer forums are awash in discussions about the commands to hide the status bar-- it's built in to the SDK.
I figure someone will have put out a small program that does nothing but hide the status bar or allow its tweaking... much like StatusBar does on the Palm OS 5 PDAs...

Is there anything available that covers the pros/cons of a simple and network PCD migration?

Is there anything available that covers the pros/cons of a simple and network PCD migration?

Hi,
as such there is no DOC but I can share my views:
Under Pros:
a. PCD is an application use to migrate older versions[6.1.5, 7.x , 8.x] running on MCS to VM servers.
b.It can be used to change the IP address or hostname on new servers without affecting existing version .
c. Many users using MCS Hardware are not willing to migrate to latest version because of existing HW not supporting interim releases which they have to hop through to get on to the target release.
d. Further, this requires license re-hosting as well for interim releases and major downtimes as well which can be avoided by using PCD without disturbing existing setup.
e. Also, DRAM/HDD sizing needs to be considered while doing migration on MCS.PCD addresses these issues for migration.
Under CONS:
a. It needs to be ordered through Product Upgrade Tool and bootable is not downloadable from Cisco site.
b. You could face some issues while doing migration which could be bugs but can be resolved.
c.could face issues while discovering cluster/doing migration but can be resolved.
regds,
aman

I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

i see that there are people that have the problem suddenly all notes disappear :
this is with me also happend and now comes it
when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

Hello,
Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

Their is two new Updates that are the same for the OS X Mountain Lion v10.8.5, except one has {Combo}. Which one do i download? The info on them are the same.

Their is two new Updates that are the same for the OS X Mountain Lion v10.8.5, except one has {Combo}. Which one do i download? The info on them are the same.

It appears Apple’s download servers are ‘overwhelmed’ today. I couldn’t download the newest iTunes update or IOS 7 and there are a lot of discussions today about not being able to download. One poster said they had chatted with App Store support who confirmed the problem.

Was there an update that may be effected by expanded RAM?

Both my girlfriend and my computers had swapped the RAM in them, and in the same evening, after restarting they stopped working. When swapping the old RAM back in, they worked again. Was there an update that would have caused this error to occur?
My girlfriend is running a MacBook 5,1 with SL, and I am running a MacBook Pro 5,1 with Lion

The ram specs for a both those machines are:
204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
So the swap should have worked. Perhaps you didn't seat the dimms properly when you tried it. Was it a one-to-one swap? And why swap at all?

If I have multiple accounts in my mail on a macbook, is there a way to separate the different accounts like in two separate tabs?

If I have multiple accounts in my mail on a macbook, is there a way to separate the different accounts like in two separate tabs?

I can't think of a way to show them in tabs, but Mail lets you open as many Mail list windows as you like. Set the Mail window to show just the inbox for Account A, then choose File/New Viewer Window and set that window to show just the Account B inbox. Arrange the windows next to each other.
I open multiple viewer windows all the time when dragging messages from inboxes to various folders, it saves a lot of time.

Is there an updated solution to the AF Hands-On Exercise%3F

Hi All. I'm attempting to work through the AF Hands-On exercise found at https://decibel.ni.com/content/docs/DOC-23893. I got up to 3.c in the instructions, Testing the Water Level actor. I don't see the expected results, and noticed that the Water Level Test vi uses the "Lauch Actor" vi, which has been superceded by "Launch Root Actor" and "Launch Nested Actor". I could not figure out how to use either one in the Water Level Test.
Is there an updated version of the AF Hands-On Exercise using the new VIs, or can someone tell me how to modify the Water Level Test vi to use the new actor launching VIs?
Thanks,
-Jamie

Hello Jamie,
Did you check out READ THIS FIRST ? The section "Problems running your AF code in the run time engine? Error 1634?"discusses how "Launch Root Actor.vi" and "Launch Nested Actor.vi" have an input to open the front panel.
For more information about this specifc example, I recommend joining the AF group (see the image to find the link) and posting within the AF Community.
Warm Regards,
Josh

Is there an app that hides the status bar? Or permits customization of it?

I'd like to hide the time in the status bar, or replace it with other information.
Reason: I don't like being reminded what time it is when using a PDA type device, especially not in the middle of the night if I'm reading on it.
Is there an app that hides the bar universally, or lets one replace the time, with say the date or other text?

Are you sure about that? Several highly regarded, widely downloaded apps, e.g., eReader, have an option to hide the status bar. The developer forums are awash in discussions about the commands to hide the status bar-- it's built in to the SDK.
I figure someone will have put out a small program that does nothing but hide the status bar or allow its tweaking... much like StatusBar does on the Palm OS 5 PDAs...

Is there an update that addresses the different rending in photos between Library & Dev modules?

Similar Messages

Maybe you are looking for