Is there any alternative available for frameset

Hi,
Other than struct tiles, Is there any alternatives availabe for frameset
Thanks in advance...

maybe inline frames or a div elements.
You are speking about html right?
MeTitus
Message was edited by:
Me_Titus

Similar Messages

  • Is there any alternative battery for Nokia X2-00?

    Hi there, I was just wonderin'... is there any alternative battery for Nokia X2? coz BL-C4 battery is a li'l bit short for its lifespan. It could only take a few hours to play some music (through headset/loudspeaker)
    please help, thanks in advance...

    Hi Hanumantji,
    Can you provide us your phone model? One possible reason why the phone hangs is that there is not enough memory available to carry out phone functions. You can move your data files from phone to memory card (provided that your phone supports Memory Card). If still the same, you can try to restore the phone to its factory settings as indicated on your manual. 

  • Are there any patches available for Dev 21

    Hi,
    We've been working with Forms50 and Reports 25 under win95 for
    quite a while and have noticed occasional problems:
    - A program abort due to page fault protection under win95.For
    example, R30DES32 : R30LIB.dll.
    - You issue compile all and get and error that forms is not
    able to go to (goto error button).
    - A compile error that requires login in and out and
    recompile to fix.
    I wonder if
    - there are any patches available for Dev 21,
    - i have a memory shortage problem,
    - these are (especially case 1) win95 problems.
    Please help will be welcomed ................!
    null

    Where can I find them?
    thanks in advance,
    Xiaolin
    Jason Judge (guest) wrote:
    : There are patches for the 32bit v2.1 Windows environments
    dated:
    : 24 June 98
    : 5 August 98
    : 16 September 98
    : 21 Octomer 98
    : 21 February 99
    : and I believe a new one is just out.
    : Take your pick!
    : JJ
    : Luis Medina (guest) wrote:
    : : Hi,
    : : We've been working with Forms50 and Reports 25 under win95
    for
    : : quite a while and have noticed occasional problems:
    : : - A program abort due to page fault protection under
    : win95.For
    : : example, R30DES32 : R30LIB.dll.
    : : - You issue compile all and get and error that forms is not
    : : able to go to (goto error button).
    : : - A compile error that requires login in and out and
    : : recompile to fix.
    : : I wonder if
    : : - there are any patches available for Dev 21,
    : : - i have a memory shortage problem,
    : : - these are (especially case 1) win95 problems.
    : : Please help will be welcomed ................!
    null

  • I want to communicate with J1850 system. Is there any hardware available for this?

    I would like to communicate with a J1850 system. I am wondering whether there is any hardware available for this similar to CAN. Is there a possibility to find exampls for this kind of communication.

    On Fri, 16 Jul 2004 14:02:48 -0500, Mudda wrote:
    > I would like to communicate with a J1850 system. I am wondering whether
    > there is any hardware available for this similar to CAN. Is there a
    > possibility to find exampls for this kind of communication.
    I'm still new in this area but I will try to help. AFAIK, J1850 comes in
    two flavors: VPW and PWM. You can purchase an adapter that converts RS232
    signals to those required by J1850 for about $100.
    I suggest using an adapter from Scantool.net. I say this because I
    have one and it's very easy to use. It's flexible enough to use with a
    terminal (hyperterminal, minicom, etc.) or to interface with LabVIEW, as I
    have done for you already. Go to OpenG.org for the download:
    http://openg.org/tiki/tiki-index.
    php?page=On+Board+Diagnostic+-+OBDII
    Let me know if it works for you. The interface is a little weak but the
    VIs should clue you in on how to handle communications. I plan to add
    another update in a few days so check the site regularly. I would
    appreciate your feedback.
    -kevin

  • Is there any alternative method for GET_FRONTEND_FIELDCATALOG in CL_GUI_ALV

    Hi all,
    Please let me know if there is any alternative method for GET_FRONTEND_FIELDCATALOG (CL_GUI_ALV_GRID class) in the class CL_SALV* family. I need to capture the field catalog(Or list of fields) of the current output list.
    I have saved many layouts on my ALV output with different combinations of fields, When I select one layout and click on the custom button it should process only the fields displayed on ALV.Please let me know how do I get the fields displayed on ALV using CL_SALV_* family classes.
    Thanks,
    Prathap

    Hi,
    Check this link...[Setting up Layout|http://help-abap.blogspot.com/2008/09/salv-model-4-setting-up-layout.html]

  • Is there any alternative logic for this issue

    Hello all ,
    I have a  program which is executed as a background job for every 15 minutes . Now my requirement is If this batch job is successfully finished, i have to capture that time and date at which the batch job is successfully finished and update the corresponding time and date in a ZTABLE .
    In order to achieve this , i have created a separate program which will also be running in background.in this program , using the table TBTCO, i m getting the last date and  last time at which the batch job is successfully finished and modifying the ZTABLE accordingly
    Is there any alternate solution for this ?
    thanks&regards,
    G.Pavan

    Hi gpavansap,
    When you define background job in SM36, your first step should be the program which you have scheduled now.
    Create a second step in the same job with another program which would just update system date and time to the ZTABLE. No need to read TBTCO and all.
    The second step would immediately execute as soon as the first step ended successfully.
    If you don't want to create a separate program. you can have a check-box "Update ZTable Only" in the selection screen of the first program itself. If this check-box is selected, the program should only update ZTABLE and do nothing else. Create a variant of your selection screen with this check-box selected and schedule this variant as "Second Step" of your back-ground job.
    Regards
    Suresh

  • Location.href not working in firefox. Is there any alternative script for that?

    window. location.href not working when i try to submit an ajax form.
    I am a programmer. This code works on all browser except firefox.
    Any solution for this? or any alternative code for location.href?

    A good place to ask advice about web development is at the mozillaZine "Web Development/Standards Evangelism" forum.
    *http://forums.mozillazine.org/viewforum.php?f=25
    The helpers at that forum are more knowledgeable about web development issues.<br>
    You need to register at the mozillaZine forum site in order to post at that forum.

  • Is there any education available for the use of Firefox for a non techie?

    I have used Firefox for several years now but I am not very tech-savvy. Many of the points in your promotions and releases don't mean much to me and I feel I may be missing out on some useful tools or features. Is there any education or manual guidance on Firefox and how to use it. How would you suggest that I address this?

    Hi philcoa,
    You should check out the [http://www.mozilla.org/en-US/firefox/features/ features page] for a quick rundown of all the Firefox has to offer. If there is anything on the features page that you are interested in learning more about, you should try searching for that feature in the [https://support.mozilla.com/en-US/home Knowledge Base]. They have articles that cover pretty much every aspect of Firefox. Like this [https://support.mozilla.com/en-US/kb/getting-started-firefox Getting Started with Firefox] page.
    I'll do some digging to see if there are any other articles that might help you.

  • Is there any alternative program for RSSTAT10 in ECC6.0 system

    Dear ABAPers,
    Issue scenario:
    We are trying to create a report program in the ECC system to provide the details of the server workload. This report is a copy of the program RSSTAT10 which is working fine in other systems(3.1,4.7). The report works fine in those systems. But when we try to copy the same on ECC,we get a dump " CALL_FUNCTION_CONFLICT_TYPE ".
    The Reason for the dump :
    1.The reason is the mismatch of the field length in the import export parameters of the FM.
    2.There are a few includes and FModules that do not exist in the ECC system, but are available in the other systems. For eg. RSSTAT10 is not available.
    Our question is :
    Since RSSTAT10 is unavailable in the ECC is there an alternate program that can be used in order to generate the report that provides the details of the server workload in the ECC system?
    Regards,
    Prathap

    Check
    Program:- RSSTAT15 in ECC 6.0
    Edited by: Bala Krishna on Aug 14, 2008 12:44 PM

  • Is ther any alternative solution for music downloads other than iTunes

    Plz suggest me if there is any other service out there that provides music download service other than iTunes.
    One with DRM-Free & Monthly subscription would be awesome..!
    Thanks in advance.

    Okay, in removing duplicate posts, these got pulled. Here they are...
    <hr width="95%">
    StarDeb55 Posted: May 29, 2007 9:14 PM
    Kirk, I'm almost certain that any Napster downloads have DRM on them. 2nd problem is that Napster doesn't work for a Mac.
    The forums are having problems as you can see. When you post it is taking over 30 minutes to appear in the thread at the moment, so it's really not necessary to re-post.
    <hr width="95%">
    Kirk Boragine Posted: May 29, 2007 9:32 PM
    StarDeb55
    My mistake. I've been happily listening to their streams. The subscription service does not work for Macs, yet. Sorry to all for the post(s).
    [ sorry about that, Nubz N.]
    PM G5, PM G4, iPods   Mac OS X (10.4.9)   Mac OS 9.2.2

  • Is there any updates available for Acrobat 7.0 to be used with Vista?

    It seems to be an uncompatibilty with Vista that I acquired yesterday. No problem with XP but struggling with Vista. A guy in Dublin over the phone (when I registered the product) said it was not compatible and that is it. No solution he was aware of. The message given as a code error is 93: -2 or a window appears in Acrobat saying:
    HKCMD.EXE and IGFXTRAY.EXE - BAD IMAGE
    C:/WINDOWS/SYSTEM32/IGFXRES.DLL IS EITHER NOT DESIGNED TO RUN ON WINDOWS OR IT CONTAINS AN ERROR.
    The suggestion is to desinstal and reinstall software. I have tried this but still the same problem. I have tried so many times that I could not activate the software automatically over the internet - so called this guy in Dublin...
    I reckon that the suggested update to Acrobat 7.0.1 is not good as when installed, repeated error messages come up! I am reluctant to try to download it again just to try because I am scared that I will have to call Dublin again to activate the software...
    Any suggestion on the above?
    Thanks guys.

    Starting here http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    You could click the individual update links to read the descriptions of what is included in each update
    The current version 9 is designed for Vista (as well as XP)
    As far as I know, version 8 would work with Vista AFTER you applied the updates

  • Are there any templates available for a Flowchart in Numbers?

    I'm looking for a free template for flowcharts to be used in Numbers or Pages.

    Through other sources I found out that there are no out of the box policies for the SQL Server Plug-in today. It should be possible for customers to write new policies for a target type in the next release of EM (10gR4). Integrators and Partners can write policies for plug-ins today.

  • Is there any BAPI available for sales order creation with reference?

    Hi Experts,
    My requirement is to create sales order with reference for order type.
    Now my billing document number already contains the two items
    one is correct and another is zero quantity.
    I want to create order with reference of billing document but not with zero quantity item.
    Which BAPI I should use and what to pass to ignore zero quantity item?
    Regards,
    RH

    Hi Ronny,
    Try using BAPI_SALESORDER_CREATEFROMDAT2
    Regards,
    Shraddha

  • I need help with working with old newspaper photos. The photos need to be blown up and displayed on a traveling exhibit. Is there any training available for this?

    The photos are from newspapers going back to the early 1900s and they are now on microfilm. I can get them digitized at 600dpi but that still doesn't make them ready for placement on a large display. Besides Adobe help I use Lynda.com but I can't find anything dealing with this very specific topic. Anyone have an idea of a training program that deals with this subject?

    Thinking back to when I've seen displays of newsprint that's been greatly magnified, being able to see the halftone screen pattern seems important.  It gives the display a look of authenticity.
    You say the library can scan at 600 ppi.  If that's 600 ppi of a greatly reduced image on a piece of microfiche, it may not give you the resolution you're looking for, and it's entirely possible that getting a quality optical print then scanning it would give you better.
    I don't see how you can plan how to proceed in anything like specific detail if you don't have an image that represents what you're really going to be starting with in detail.  Perhaps getting one scan might be a good idea.
    After that, you just need to figure out what ppi your final overall panel design is going to be at, and upsample the newspaper clippings to match, so that they're the size you need them to be.
    -Noel

  • Is there any alternative statement for OPEN CURSOR?

      OPEN CURSOR WITH HOLD l_cursor FOR
              SELECT paledger vrgar versi perio paobjnr pasubnr belnr posnr
                             hzdat usnam gjahr perde wadat fadat budat altperio papaobjnr
                            papasubnr kndnr artnr fkart frwae kursf kursbk kurskz rec_waers
                           kaufn kdpos rkaufnr skost prznr bukrs kokrs werks gsber vkorg
                         vtweg spart hrkft plikz kstar pspnr kstrg rbeln rposn sto_belnr
                         sto_posnr prctr pprctr rkestatu timestmp copa_awtyp copa_aworg
                     copa_bwzpt copa_awsys ktgrd kmhi01 kmhi02 kmhi03 hie04 hie05
                     hie06 hie07 prdha ww003 kunwe pstyv ww150 vsart ww152 ww153
                     ww154 ww155 crmelem ww156 ww157 vbund vv002_me vv001_me vv003_me
                     vv002 vv070 vv071 vv072 vv073 vv074 vv075 vv076 vv077 vv078
                     vv079 vv080 vv081 vv095 vv096 vv040 vv104 vv001 vv003 vv004
                     vv028 vv105 vv150 vv151 vv152 vv153 vv154 vv155 vv038 vv068
                     vv030 vv156 vv157 vv158 vv159 vv160 vv161 vv162 vv035 vv166
                     vv167 vv168 vv169 vv170 vv171 vv172 vv163 vv164 vv165 vv045
                     vv046 vv047 vv059 vv031 vv032 vv039 vv173 vv195 vv194 vv193
                     vv192 vv191 vv184 vv185 vv186 vv187 vv188 vv189 vv190 vv174
                     vv175 vv176 vv177 vv178 vv179 vv180 vv181 vv182 vv183
              FROM (l_table)                                    "ce1na01
              WHERE  paledger IN r_curr_ty
              AND   vrgar IN r_record
              AND   perio EQ lv_period.
    *  Fetch in Packets of 10000
        DO .
          FETCH NEXT CURSOR l_cursor
            INTO TABLE lt_data
            PACKAGE SIZE 10000.
    *  No More Data
          IF NOT sy-subrc IS INITIAL.
            CLOSE CURSOR l_cursor.
            EXIT.
          ENDIF.
         ENDDO.
    This is my current code. while executing it is taking more time so we need optimize this statement. Could you please suggest me.

    No.

Maybe you are looking for