Is there any alternative tcode to maintain Exchange rates other than OB08

Hi All,
Just i want to know is there any alternative tcode for maintaining exchange rate other than OB08.
I want to maintain the exchange rate for one perticular user only.
Thanks,
suraj

Exchange rates are valid for everyone, they cannot be maintained for a single user. However it is possible to create separate exchange rate types and maintain separate exchange rates for them. These types could be added to some special document types, but it only works in FI.

Similar Messages

Is there any t-code to upload Asset Balances other than OASV

Hello Genius,
Is there any other T-code to upload Asset Balances other than OASV.
Please guide me in detail
Regards
JS

if you ahve uploaded assets with AS91 then it would ahve already posted to the Asset accouting sub ledger, but not to the GL. So you ahve to use OASV to post to the GL.
Posting using ABSO will post to both the AA and the GL resulting in duplicate entry in the Asset accoutning
you can use ABSO only when creating the asset master with AS01.

Is there any way to refresh the zfs snapshot other than creating another on

Hi,
I want to use the zfs send / recv replication, after I create the snapshot and do send/ recv to the remote filesystem, is there any way to do send and recv from the same snapshot after making some changes to the original filesystem other than creating another snapshot every time before send / recv
Thanking you
Ushas Symon

No, you'd have to take another snapshot and then send it, but you don't need to save all the snapshots after you are done. If you script it out to take snapshots fairly often during the day, the amount of data would be small. You can also send to a file and then backup that file to tape or whatever, you wouldn't have to save a million snapshots. You can also look into OpenSolaris' Time Slider function.

Is there any way to get the server app other that through the app store. We do not have our system conneted to a network. I typical downloaded items on a non-apple system.

is there any way to get the server app other than through the app store. The system that I need it on are not connected to the internet.
We run a closed-loop network of apple systems and I tipically downloaded updates on a non-apple system that was on the internet.
Any ideas?

I did buy the server app, went to the app store to download it. This system I'm using for downloads is Snow Leopard 10.6.8, it shows that I can download it but only as an Install which says I need 10.8. I can't seem to find a way for it to just download as a package or .dmg file so that I can copy it to DVD/CD or flash drive.

Is there any alternative to GUI_DOWNLOAD other than WS_DOWNLOAD?

Hi All,
Is there any alternative FM other than GUI_DOWNLOAD and WS_DOWNLOAD?I need to download a PDF file to a network drive.
Thanks in Advance,
Anjaly

Hi,
If u want to download a PDF file from application server...
u can use the transaction... <b>CG3Y</b> directlyy..
just check it and use it in ur program..
cheers,
Simha.

Is there any way to block accessing Exchange server

Hello,
We are using iPhone as a business phone to
access Exchange server using ActiveSync.
Is there any way to block non-company, in
other words private iPhone, iPhone to access
Exchange Server?
Some users have 2 iPhones (1 provided by our
company, 1 purchased by himself/herself as
a his/her private phone).
We would like to block those non-company iPhone.
If there is a way(s), please let me know!!
Thank you very much in advance.
Regards,
Tak

Block/Delete will appear if "Enforce Password on Device" is NOT ticked in ESM at the time when that particular iPhone (or other smartphone) was first joined to EAS.
Wipe/Delete will appear if "Enforce Password on Device" IS TICKED in ESM at the time when that particular iPhone (or other smartphone) was first joined to EAS.
The only difference is, if you first have "Enforce..." ticked and you join phones A,B,C, - they will always have WIPE next to that phone even if X months down the line, you untick "Enfore...".
If at that point (after unticking "Enforce..") you join phones D,E,F, they will have BLOCK next to their phone and always will have until you tick the "Enforce..." again and the user will be prompted to input a code when they next sync.
Again I repeat, the 'Lock code' when inputted into the phone acts as an agreement between the user & exchange that exchange has permission to wipe the phone remotely. Without that agreement ("Enforce..."), you should not have the WIPE function on those particular phones.
Hope that makes sense.

Is there any alternative to set serveroutput on

without having to use the set serveroutput on can i make the results display using dbms_output.put_line.i have tried using dbms_output.enable on somebody's advise.
begin
dbms_output.enable;
dbms_output.put_line('xyz');
end;
but the above one is not displaying the result if i don't use set severoutput on. is it must to use set serverout on.is there any alternative keyword or somthing which i can embed in pl/sql block itself to display the result.
thank you.

pl/sql is not a user interface tool. It cannot display anything. There are various ways to get to see output from it but whatever method must involve some other facility which has the ability to display stuff.

Is there any alternative application to the Carbid...

Hi,
Is there any alternative application to the Carbide.ui Theme Edition?
Solved!
Go to Solution.

I've tried carbide.ui several times over the years but never stuck with it long enough to get any decent results. The program is aimed at developers and offers total control but that also makes it feel complex.
The creators on those sites are very simplified and aimed at users without any theme creating knowledge at all. As a result you have much less control over your theme. If you are looking to create themes for your own use then they are fine but if you want to create professional quality themes your only option is carbide.ui.
There are guides for working with carbide.ui which you can find by searching google but you will still need to invest a lot of time and effort if you want good results.
Personally I now just stick to using themes created by professionals such as babi, pizero and tehk along with custom wallpapers that I adapt or create myself.
Message Edited by psychomania on 27-May-2009 01:19 PM

Is there any backend file for maintaining and support BRTOOLS?

Hi Gurus,
Is there any backend file for maintaining and support BRTOOLS.
Thanks in Ad

Not sure for your requirement here, but, were you looking for the following ?
http://help.sap.com/saphelp_erp2004/helpdata/en/5d/803aba13a1fa4786e121dc1f7abfba/frameset.htm

Hi I have recentrly bought IPAD AIR , is there any flash version supporting this model or is there any alternative for flash siles to open ?

Hi,
I have recently bought IPAD AIR , is there any flash version supporting this model or is there any alternative for flash sites to open ?

iPad do not support Flash
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability

Is there any alternative to Thread.stop();

Hi everybody,
I am facing troubles ,while stopping the Thread. at present i am using 'Thread.destroy()', because Thread.stop() was deprecated.#
Is there any alternative for Thread.Stop()
Thanks in advance!
bye

boolean myThreadShouldRun;
public void run()
while (myThreadShouldRun)
doSomeThing();
to stop the thread use: myThreadShouldRun=false; from outside the thread and it will stop the natural way. forcing threads to stop with the stop method was dangerous and therefore this method is deprecated and will maybe not be supported in future releases.

Is there any alternative to console cable for pix 501 firewall?

I need help on CISCO PIX 501 Firewall, it comes with console cable having serial port, but systems now a days & the one i am having are not having serial port so i am not able to access command-in-line , is there any alternative way, can it be accessed using ethernet or lan wire, if so please provide steps, waiting for your valueable responses, ...

Hi,
Have you considered getting an USB adapter for the Console cable?
I had to get that for my first work laptop since they happened to order a model without the serial port. For the most part it worked just fine.
I guess depending on your PIX configurations you might be able to boot it up and attach a PC directly to it and manage it.
- Jouni

Is there any alternative for adding servlet name in Web.xml?

Hi,
I am new to Weblogic and I have an application(Ear file) which was developed
in Websphere and I am trying to install in weblogic 8.1. I have installed my application
in Websphere without adding servlet entries in Web.xml and it was working fine.
I have installed the same Ear file in Tomcat and added the
following to make all my all servlets work.
<servlet-mapping>
<servlet-name>invoker</servlet-name>
<url-pattern>/servlet/*</url-pattern>
</servlet-mapping>
Is there any alternative of doing like that in WebLogic instead of adding each
and every servlet entry in web.xml because my application has around 200 servlets
Thanks&Regards,
Gopi.

Is Servlet servlet same as weblogic.servlet.ServletServlet?
Deepak
Rob Woollen <[email protected]> wrote:
Yes, you could register weblogic.servlet.ServletServlet.
-- Rob
Gopi Krishna wrote:
Hi,
I am new to Weblogic and I have an application(Ear file) whichwas developed
in Websphere and I am trying to install in weblogic 8.1. I have installedmy application
in Websphere without adding servlet entries in Web.xml and it was workingfine.
I have installed the same Ear file in Tomcat and added the
following to make all my all servlets work.
<servlet-mapping>
<servlet-name>invoker</servlet-name>
<url-pattern>/servlet/*</url-pattern>
</servlet-mapping>
Is there any alternative of doing like that in WebLogic instead ofadding each
and every servlet entry in web.xml because my application has around200 servlets
Thanks&Regards,
Gopi.

Is there any alternative available for frameset

Hi,
Other than struct tiles, Is there any alternatives availabe for frameset
Thanks in advance...

maybe inline frames or a div elements.
You are speking about html right?
MeTitus
Message was edited by:
Me_Titus

Is there any alternative battery for Nokia X2-00?

Hi there, I was just wonderin'... is there any alternative battery for Nokia X2? coz BL-C4 battery is a li'l bit short for its lifespan. It could only take a few hours to play some music (through headset/loudspeaker)
please help, thanks in advance...

Hi Hanumantji,
Can you provide us your phone model? One possible reason why the phone hangs is that there is not enough memory available to carry out phone functions. You can move your data files from phone to memory card (provided that your phone supports Memory Card). If still the same, you can try to restore the phone to its factory settings as indicated on your manual.

Is there any alternative tcode to maintain Exchange rates other than OB08

Similar Messages

Maybe you are looking for