Is there any audio driver avalible for dv6358eu ?

Hi!
Is there any windows XP audio driver avalible for dv6358eu ?

Hi,
MS-UAA for SP2 (required with a reboot before Audio and Modem) here
MS-UAA for SP3 (required with a reboot before Audio and Modem) here
Conexant High-Definition Audio here
Unzip to a folder..use Device Manager,right click "Audio Device on HD",choose Update driver,
No to connect,
Install from a list or specific location,
Select Don't Search, I will choose the driver to install,
For the Hardware Type select 'Show All Devices'
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains.
Reboot.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

Are there any graphic driver updates for Satellite L850-162

Are there any driver updates available for the L850-162?
I'm just running with the ones that came installed with the laptop but the display is pixellated and jumpy when watching video.
Any help/advice would be much appreciated

Sat L850-162 is a part of the PSKDGE and it has been equipped with an Intel HD (INTEL HM76) Express chipset (graphic chip)
There are more Toshiba series which use the same chipset so you could also use the drivers released for such notebook models.
For example:
C850 PSKC8E
C855 PSKC8E
C870 PSC8EE
L830 PSK84E
L870 PSKBGE
P850 PSPKBE
and others
At least you could also try to use the Intel HD HM76 driver from the Intel page.

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Is there any audio difference

Is there any audio difference that is better in dvd studio then there is in idvd if you were to put the same project in both, I am just talking about regular music or soundtrack or audio from a shoot.

iDVD is limited in its audio options, with DVD SP you can make audio AC3 which is a compressed audio format (and more compressed than iDVD audio). That being said for many things AC3 is going to be fine to use and helps with compatibility by reducing bandwidth taken up by audio.
Think of it this way, when you listen to an aif file as oppossed to an AAC from iTunes you may here some differences, but it will depend on what is on the track and the encoding rates for the track.

Are there any available vi's for PXI?

Are there any VI's avaliable for PXI as it is for example VXI?
Regards
Henrik

Hi Henrik,
What kind of VI's do you need? PXI (PCI Extension for Instrumentation) is based on the PCI bus and you've usually a Windows PXI-Controller or a MXI-4 link (PCI-PCI-Bridge) which controls all boards in a PXI Chassis. There is no difference prgramming differnce between a LabVIEW VI which runs in a PC or in a PXI Controller. For example, it doesn't matter if you've a PCI-6025 DAQ board or a PXI-6025 board. The VI (programming) is the same. Of course, the PXI factor has more synchronisation and trigger capabilities then a PC based system, but there are no special VI's for that. The same DAQ driver handles both.
I can give you a more detailed answer if you can give more informations. What do you want to do?
Regards,
Luca

OFSAA CRM ERROR 16616 - Are there any list of errors for consult

Hi gys
OFSAA CRM ERROR 16616 - Are there any list of errors for consult about CRM ?
regards
Daniel Daniele

@chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
...the other folders did copy okay though!
It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
@ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
@alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
Thanks for the help!
(pre-post) UPDATE >>> I've just mounted my Windows partition in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Check the drive health with the free demo of SMART Utility.
http://www.volitans-software.com/smart_utility.php
Reformatting and zeroing out might keep a drive going a bit longer, but once bad blocks become noticeable, it's not a drive you should trust any longer.

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Is there any BTE or Badi for Vendor Outgoing payment posting

Hi Experts,
My client who want the bank commission deduction at the time of vendor outgoing payment on the net values. the bank commission is fix of Rs. 0.07 Paise Per Rs. 1000/-
The scenario is as below:
Client who deduct the deduction at the time of Invoice for e.g. can bhade, Sanstha anamat , Prakriya Kharch ,Vahtuk Bhade, Share anamat etc. this deduction are directly update the Accounting GL .
after that the client pay the vendor dues amount. in this they deduct some deduction through Account (FI) (E.g. Sanstha Audit fee, Shikshan fund, machine anamat) & After deducting the Accounting deduction they calculate bank commission on the net amount (Invoice amount - FI deductions = Net amount)
Dear Expert, Please help me to work out this problem. in sap at the time of invoice we deduct the deduction as per client required & get the vendor due amount properly.
but at the time of vendor outgoing payment i had done the FI side deduction manually but i can't get the bank commission on the net dues amount. client required automatic bank commission deduction on the net amount.
is there any BTE or BADi for Vendor outgoing payment?
Please help me to workout this issue.
Warm regards,
Dhananjay Rahane.

ok

Is there any difference viewer software for reports??

Hi,
Is there any difference viewer software for viewing differences between two oracle reports??
Thanks for ur suggestions!
Madhu

Any version control software, like CVS, allows for line-to-line comparison of different versions of the same file. The problem with reports is that to understand differences you need to save the reports in human readable format that can be REX-file.

Is there any third party software for itunes that will do this:

Is there any third party software for itunes that will organize the browser window. Ideally I would like the third browser window (album name) organized by "main albums" "compilations" "bootlegs" "singles"
It would look like this for the Beatles
Main
1963 Please Please Me
1965 Help
etc.
Compilations
1970 Red Album
1990 Greatest Hits
etc.
Bootlegs
1985 Ultratrax 1
etc.
CD Singles
1999 Whatever
This info would be marked on either the info or option tab when labeling.
If this has not been made, one of you nerds should make it, it would be great and you could charge $3 for it and I buy it. and so would 100,000 other people.

If you haven't already, try looking through the Apple Downloads specifically for iTunes.
http://www.apple.com/downloads/macosx/ipod_itunes/
There might be something there that is at least similar to the app your looking for.
edit: There is one shareware that is an iTunes plugin called Multi-tunes. With it you can create multiple iTunes libraries, one library called "Main" one called "Bootlegs" etc, and Multi-Tunes will allow you to quickly switch between them from within the iTunes window. Not exactly what your looking for but close.
http://www.apple.com/downloads/macosx/ipoditunes/multitunesdavidcaldwell.html
Message was edited by: Zookalicious

Is there an iCloud Drive app for the iPhone?

Is there an iCloud Drive app for the iPhone? I have a 5c that's running 8.0.2.
I was able to install iCloud Drive on my pc. I placed some files out there and would like to view them on my iPhone but I can't seem to find the iCloud Drive app in the app store.
There appears to be an iCloud Drive app according to the pictures here: http://www.apple.com/icloud/icloud-drive/.
Is the app not available yet?

I've had an android phone since they first came out. Verizon took forever to get the iphone and by the time they did, I was so used to having a phone with a big screen and was already on a 4g device and I didn't want to take a step back to 3g and a smaller screen so I never gave apple a try. I recently sold my android phone in preparation for the next android phone release and I broke my temporary phone trying to it's replace it's cracked glass (something that's much easier to do on an iphone btw) so I had to find another temp phone. With the release of the iphone 6/6+ and everyone going so crazy about it, I decided to borrow a friend's old 5c for a month to see what all the hype was about when it comes to iphones while I wait for my android phone to come in. So far I can honestly say aside from a few things here and there, I haven't really felt like there's much of a difference to warrant the flame wars that I see on android vs apple. Some things work better on iOS for sure but there are some things I'm used to doing on android that I can't do on iOS. I really like it's overall simplistic feeling. The people on the far left and far right in terms of apple over android or android over apple and their arguments are pretty comical to me now that I've had some exposure to both.
Anyway in terms of the iCloud drive, from everything I've read it looks like it'll be identical to Google Drive which I've been using for years but without an app, it's definitely confusing on how I get to my documents and photos that I've stored on my iCloud Drive. With android, before the app I could go to the desktop site for google drive and access my documents. When I try to go to icloud drive from safari on my phone, it automatically takes me to "set up icloud tutorial" even though it's already set up on my phone. I'm happy to find that I'm not the only one that's confused by apple's description of the implementation and what's actually implemented.
I still have a few weeks before I get my android, but I'd be lying if said I haven't considered cancelling my preorder of the note 4 and grabbing a 6+ to give an iphone more than a months trial. I mean in the end, people buy iphone's like candy so it's not like I'd be stuck if I end up ultimately not liking it.
Thanks for your responses, hopefully they implement it's full functionality while I still have time to decide one way or another.

Are there any WWI flying games for the mac?

Are there any WWI flying games for the modern mac? (Computer)
The only one's I can find are on line.
Which isn't always an option when traveling.

You might want to search in the App Store.
Phil

TS2289 I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

What version of iMovie?
What camera?

Is there any VIEW or FM for pulling data from VBAK, VBAP?also for VBEP,VBBE

Hi Experts,
1) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBAK & VBAP,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
2) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBEP & VBBE,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
3) Am guessing FOR ALL ENTRIES is better than JOINS in PERFORMENCE perspective, Is am I correct?
thanq
Edited by: Srinivas on May 9, 2008 5:36 PM

Hi Srinivas,
You can use the view WB2_V_VBAK_VBAP2 for fetching data from VBAK and VBAP instead of using a JOIN. Note that, in the view, item data fields will have a I following the field name (POSNRI, MATNR_I are the item data fields from VBAP). The master data fields of VBAK are the same.
As far as i know, there are no standard views provided by SAP for VBEP and VBBE. Not sure if FM exists either.
While using FOR ALL ENTRIES clause make sure that you specify the entire primary key (EX. if selecting from VBAP specify VBELN and POSNR) as fields for selection or in the selection criteria. Its much better if you have the primary key in both. This is really important because without specifying the entire key and using FOR ALL ENTRIES will drastically bring down the performance. And also, If you are fetching not more than 100 or 200 entries using the clause it is fine, beyond that its same as using a select statement within LOOP...ENDLOOP.
So, you have to decide whether to use FOR ALL ENTRIES or a JOIN while selecting data depending on the requirement. If you don't have the entire key either in fields for selection or selection criteria, then its better to use a JOIN or VIEW.
The following is an example for using FOR ALL ENTRIES clause effectively.
         Select VBELN
                    POSNR
                    MATNR
            From VBAP
              into Table T_VBAP
          For All Entries in T_DATA
          Where VBELN eq T_DATA-VBELN
              And POSNR eq T_DATA-POSNR.
I hope this helps, Please let me know if you need further assistance.

Is there any audio driver avalible for dv6358eu ?

Similar Messages

Maybe you are looking for