Is there any BAPI or FM to authorization object to user in ABAP program??

Hi guys.
           My requirment is to assign  authorization object to user in ABAP program,is there any FM OR Bapi to do this?

Hai  ,
In order to do the authority check in the program ,   in your report at selection-screen event   you need to check for the corresponding authority output .
example :
T SELECTION-SCREEN ON p_carrid.
  IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
  ENDIF.
  AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT'  FIELD '03'.
Regards,
K.VinayKumar

Similar Messages

  • Is there any way through which I can stop download of my ABAP programs???

    Dear all,
    I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
    Thanks in Advance
    Sachin Gautam

    Hi again,
    1. In that case we cannot do much.
    2. However,
       we can use
       the exit
       SEUED001
      (fm is EXIT_SAPLS38E_001)
      to restrict the program
      in edit mode,display mode
      etc etc.
      depending upon the PROGRAM NAME.
    I hope that serves your purpose.
    regards,
    amit m.

  • Is there any BAPI returning the affected organisational units to users?

    Dear all,
    I would like to ask a question about organizational units. Whenever I want to affect a user to a given unit I
    use PPOME transaction. If I want to do this in ABAP level I use the function module RH_RELATION_WRITE.
    I would like to know, is there any BAPI returning the affected organizational unit to a given user?
    Thanks in advance,
    Kind Regards,
    Dariyoosh

    Alberto Sesma wrote:
    You can use Function Module RH_STRUC_GET
    >
    >
    > CALL FUNCTION 'RH_STRUC_GET'
    >   EXPORTING
    >      ACT_OTYPE = 'US'
    >      ACT_OBJID = user_name
    >      ACT_WEGID = 'US_CP_O'
    >   TABLES
    >        RESULT_TAB = LT_RESULT_TAB.
    >
    >
    > You will get the related org units in LT_RESULT_TAB. There are other two table parameters in that function module that you may find useful.
    >
    > If the function does not return any valid data you may try with other values for WEGID. You will find all the possible evaluation paths in transaction OOAW.
    >
    > Kind regards
    Dear Alberto,
    Thank you very much for your answer. I didn't know this FM and it solved my problem.
    For those who may be intered here is exactly I proceed. Suppose that in the table HRP1000 you have an
    structure (type S) with ObjID = 50000342 and you wish to have the SapUserID of the affected persons.
    DATA:
          affected_users TYPE STANDARD TABLE OF swhactor,
          user LIKE LINE OF affected_users.
    START-OF-SELECTION.
      CALL FUNCTION 'RH_STRUC_GET'
        EXPORTING
          act_otype              = 'S'
          act_objid              = '50000342'
          act_wegid              = 'A008'
          act_plvar              = '01'
          act_begda              = sy-datum
          act_endda              = sy-datum
          act_tdepth             = 0
       TABLES
         result_tab             = affected_users
    EXCEPTIONS
       NO_PLVAR_FOUND         = 1
       NO_ENTRY_FOUND         = 2
       OTHERS                 = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      LOOP AT affected_users INTO user.
        WRITE: / user-objid.
      ENDLOOP.
    Also in transaction OOAW we can have all possible values for the third argument of the module function (act_wegid).
    For those who are interested, here are a few among many possible values which seem to be intesting for my
    problem.
    DFPS_DG1----
    Organizational Unit of User
    DFPS_DG3----
    All Org. Units Above a User
    ORGAS----
    Closest Organizational Unit and structure
    ORGASS----
    Closest Organizational Unit and structure     
    PPLEORG     -
    Organizational unit of an employee or position
    SAP_ORGP----
    Organizational assignments of a user/person
    SAP_USOG----
    Organizational Assignments of a User
    SAP_US_S----
    Positions and Personnel Number of a User
    US_S_S_C----
    All positions and jobs of a user
    WFM_ORGU----
    Organizational Assignment of User
    WF_ORGUN----
    Organizational unit of a user/person (module id Ben./Pers.)
    For example, let's say we have a userid named MYUSER01 and we would like to find all structures to which the user
    is affected. Here is how I proceed.
    DATA:
          itab_user_structures TYPE STANDARD TABLE OF swhactor,
          row_user_structures LIKE LINE OF itab_user_structures.
    START-OF-SELECTION.
    CALL FUNCTION 'RH_STRUC_GET'
        EXPORTING
          act_otype              = 'US'
          act_objid              = 'MYUSER01'
          act_wegid              = 'US_S_S_C'
          act_plvar              = '01'
          act_begda              = sy-datum
          act_endda              = sy-datum
          act_tdepth             = 0
       TABLES
         result_tab             = itab_user_structures
    EXCEPTIONS
       NO_PLVAR_FOUND         = 1
       NO_ENTRY_FOUND         = 2
       OTHERS                 = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      LOOP AT itab_user_structures INTO row_user_structures.
        WRITE: / row_user_structures-objid.
      ENDLOOP.
    Thank you very much for your help.
    Kind Regards,
    Dariyoosh

  • Is there any BAPI or function module  to delete entries from a table (VBAK)

    Hi Everybody,
    this is my first thread in SDN...
    my problem follows...
    A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
    tables:
    VBAK     sales document: header data
    selection fields:
    VBAK-LIFSK      &#8800;     <BLANK>
    VBAK-ERNAM     =     userID used by e-Sales / IVE
              (EP-BATCH / EAI-BATCH)
    VBAK-ERDAT      <=     Current system Date
    VBAK-ERZET     <=     Current system Time - 20 minutes
    These orders should be deleted from SAP system.
    This report should be scheduled to run regularly every 10 minutes.
    my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
    best replies will be rewarded....
    regards
    Reddy

    Hi Vasanth ,
    thanks for your reply.
    i tried in the same manner what u mentioned.
    but how to pass only one parameter to the functionmodule..
    here in this case we have to pass only update flag as 'D'..
    i did the same it giving dump..
    An exception occurred that is explained in detail below.                          
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was      
      not caught and                                                                   
    therefore caused a runtime error.                                                 
    The reason for the exception is:                                                  
    The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:                                                                               
    In the function module interface, you can specify only                            
    fields of a specific type and length under "ORDER_HEADER_INX".                    
    Although the currently specified field                                            
    "INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.              
    my pgm :
    *& Report  YNEW_ORDER_DELETION
    REPORT  ynew_order_deletion.
    TABLES:vbak.
    PARAMETERS:
         p_lifsk LIKE vbak-lifsk DEFAULT '02'.
    SELECT-OPTIONS:
       s_lifsk FOR vbak-lifsk DEFAULT '10',
        s_ernam FOR vbak-ernam,
        s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
        s_erzet FOR sy-uzeit.
    *PARAMETERS:
    p_erzet LIKE sy-uzeit.
       s_erdat like vbak-erdat,
       s_erzet like vbak-erzet.
    DATA:
       BEGIN OF int_final OCCURS 0,
            w_vbeln TYPE vbak-vbeln,
       END OF int_final.
    DATA:
      int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
    DATA:
      wf_time TYPE sy-uzeit.
    INITIALIZATION.
      s_ernam-low = 'KULKARMA'.
      s_ernam-sign = 'I'.
      s_ernam-option = 'EQ'.
      APPEND s_ernam.
    s_ernam-low = 'EAI-BATCH'.
    s_ernam-sign = 'I'.
    s_ernam-option = 'EQ'.
    APPEND s_ernam.
    wf_time = sy-uzeit - 1200.
    p_erzet = sy-uzeit - 1200.
    p_erzet-low = wf_time.
    APPEND s_erzet.
      int_order_header_inx-updateflag = 'D'.
      APPEND int_order_header_inx.
    START-OF-SELECTION.
      SELECT vbeln FROM vbak
                       INTO TABLE int_final
                       WHERE lifsk EQ p_lifsk
                         AND ernam IN s_ernam
                         AND erdat IN s_erdat
                         AND erzet IN s_erzet.
      IF sy-subrc = 0.
        LOOP AT int_final.
          CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
            EXPORTING
              salesdocument         = int_final-w_vbeln
      ORDER_HEADER_IN             =
        order_header_inx            = int_order_header_inx
      SIMULATION                  =
      BEHAVE_WHEN_ERROR           = ' '
      INT_NUMBER_ASSIGNMENT       = ' '
      LOGIC_SWITCH                =
      NO_STATUS_BUF_INIT          = ' '
            TABLES
              return                      = int_return
      ORDER_ITEM_IN               =
      ORDER_ITEM_INX              =
      PARTNERS                    =
      PARTNERCHANGES              =
      PARTNERADDRESSES            =
      ORDER_CFGS_REF              =
      ORDER_CFGS_INST             =
      ORDER_CFGS_PART_OF          =
      ORDER_CFGS_VALUE            =
      ORDER_CFGS_BLOB             =
      ORDER_CFGS_VK               =
      ORDER_CFGS_REFINST          =
      SCHEDULE_LINES              =
      SCHEDULE_LINESX             =
      ORDER_TEXT                  =
      ORDER_KEYS                  =
      CONDITIONS_IN               =
      CONDITIONS_INX              =
      EXTENSIONIN                 =
        ENDLOOP.
        LOOP AT int_return.
          WRITE:/ int_return-type,
                  int_return-id,
                  int_return-number,
                  int_return-message.
        ENDLOOP.
      ENDIF.
    please help me ..its a very urgent issue to be solved...
    am waiting for ur reply...
    regards
    gangareddy

  • Is there any BAPI allowing to retreive dump information in details?

    Dear all,
    I would like to ask a question about dumps that are sometimes generated on SAP sytems.
    Each morning, by using the transaction ST22 I can see the dumps that were generated during
    the precedent day. I click on each dump label then in the menu System > list > save
    I can save the dump file which includes technical information about the error (our
    developers look inside in order to find out what went wrong that gernerated the error)
    Now, sometimes there are actually too many dumps and saving each file by ST22 one by one
    takes too much time.
    I know ABAP programming language, I would like to ask is there any BAPI in SAP which could be called
    and that provides the same details that you can have by ST22 about the generated dumps? I was thinking
    to call inside a loop (as many times as there are dumps) this BAPI and write the datails about each
    dump in DATASET and creates the files.
    So, do you know any BAPI providing information about dumps?
    Thank you very much for your attention,
    Kind Regards,
    Dariyoosh

    Hello there,
    Thanks for this information, I'm going to look into the function group in order to
    see how I may use its function modules properly for my purpose.
    Thank you very much,
    Kind Regards,
    Dariyoosh

  • Is there any Bapi for Physical Sample creation

    Hi Folks,
    Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a  physical sample......
    Any ideas or suggestions would be appreciated..
    thanks
    chaithanya.

    HI Chaitanya,
    You can use : BAPI_BATCH_CREATE
    it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
    Regards,
    -Venkat.

  • Is there any BAPI or FM which updates or modifies FD32 transaction

    Is there any BAPI or Function module  which updates or modifies the fields of FD32 transaction screens

    Hi, Srikanth
    Please Have a look at this Link [BAPI for FD32 |bapi for FD32]
    Please Search Before Posting
    Hope will Solve out your Problem,
    Best Regards,
    Faisal

  • Is there any BAPI's to get system information

    HI All,
    Is there any BAPI's to get system information like name which NWcomponent is installed, version, function modules which are implemented.
    ITS VERY URGENT
    Thanks

    Hi,
    bapi for getting the details of system inthe sense euipment i believe so try this bapi
    BAPI_EQUI_GETDETAIL
    BAPI_EQUI_GETLIST
    Regards,
    sana.

  • Is there any BAPI to update LFA1/LFB1?

    Hi, Expert:
    I wrote one customer program to upate the following two fields. Is there any BAPI I can use, because It's master data. we need create CHANGE POINTERS.  we can't directly update them.
    LFA1-SPERQ (2)  Function That Will Be Blocked
    LFB1-ZAHLS (1) - Block key for payment
    Regards,
    Zhang

    Hi experts, I have to modify the master data also, but, the scenario for me is diferent. I have to update the withholding - tax information. I need to create new rows , and also modify others. I know that´s information is in the LFBW table, but i can´t find any bapi to update it. Any Idea?
    Thanks in advance.

  • Is there any Bapi to Connect to the Sql Serve

    Hi ,
              I have a requirement in which i want to connect to the Sql Server is there any BAPI for the same can anybody help me out .
    Thanks in advance
    Regards
    Shankar

    Hi.
    Have you read the online documentation and searched for "native SQL". If yes, what are your specific questions?
    Best regards,
    Jan Stallkamp

  • Is there any BAPI/FM to create a standing request

    Hi all,
    Is there any BAPI/FM which can be used to create a standing request?
    with regards,
    Sumanth

    we can create using the BAPI_REQUEST_CREATE
    with regards,
    Sumanth

  • Is there any BAPI for BOM creation? which does by RCSBI010 / Batch Input.

    Hi Experts,
    I need to Upload the extracted Excel-file(.txt) for BOM creation, so, pls, let me know that, Is there any BAPI for this purpose. In detail the requirement is that,
    The suggested idea shuld work as like as pgm. RCSBI010
    thanq
    Edited by: Srinivas on Feb 14, 2008 6:18 PM

    Hi Srinivas,
    Try these Function Modules
    CS_BI_BOM_CREATE_BATCH_INPUT   - Create BOM Via Batch Input
    CS_BI_BOM_CREATE_BATCH_INPUT1  - Create BOM Via Batch Input (Corrected Session Handling)
    There are two BAPI's too, which can be used
    ALE_MATERIAL_BOM_GROUP_CREATE
    BAPI_MATERIAL_BOM_GROUP_CREATE - Creation of a material BOM group
    Hoe this helps.
    Edited by: Priyabrata Samanta on Feb 15, 2008 3:56 AM

  • Is there any BAPI that can create assignment in workforce planning (CMP2)

    Hello,
    I want to implement a batch input program in order to create assignment in workforce planning. But the screen is not actually proper for batch input. Is there any Bapi that can create assignment for a given network, Operation/Activity, suboperation/Subactivity, personel Number and work hours.
    Thanks in advance.

    Hi Aselsan,
    Please have a look into the below link
    [Link 1|Re: BAPI to create network (T-code CJ21)]
    [Link 2|Example code for BAPI_NETWORK_MAINTAIN]
    [Link 3|BAPI_NETWORK_COMP_ADD]
    Hope they are useful,
    Thanks
    kalyan

  • Is there any bapi/Function module to change only header text in fb02

    Hi ,
    I want to change only header text in FB02 .the header text will come  from a internal table.My Requirement is
    1. open a document in FB02
    2.change the header text of the document.
    Right now i'm doing this through an BDC.but i'm looking for a BAPI /FM.
    I Tried bapi_acc_gl_posting_post, fI_document_change..
    is there any BAPI/FM for this???
    Thanks,
    Challa

    You can use SAVE_TEXT FM
    Thanks
    Seshu

  • Are there any BAPI or FM available to create partners for a customer ?

    Hello,
    Are there any BAPI or standard FM available to add new partner for a customer ?. The new partner is an existing customer.
    Thanks,
    Jay

    Hi,
    Can any one let me know if i can create a customer using BAPI with personal data and with out any reference customer number. If i create with reference number the partner functions are picked up from here while creating the new customer.
    Thanks in advance.

Maybe you are looking for