Is there any BCT Datasource which could extract The PO History data?

Hi all,
Is there a BCT datasource which could extract the PO history data ?
Thanks in advanced.
Shon.

Hi,
definitely..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/eee637f5a44276b718751a19dcc3bd/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/6d5fa811684ad6af14915b81d32b4e/frameset.htm
regards
Happy Tony

Similar Messages

Datasource which could extract the PO history data

Hi all,
Is there a BCT datasource which could extract the PO history data i.e from EKBE table ?
Thanks in advanced.
SAM

Depending on which infi you need, there are 3 datasource:
Header - 2LIS_02_HDR
Item - 2LIS_02_ITM
and
Scheduling - 2LIS_02_SCL
The info about the history (good receipt and invoice related) are on the scheduling, but to define correctly the PO in your query you should need also the others two datasource.
You'll find more info at
http://help.sap.com/saphelp_nw04/helpdata/en/e9/62073c44564d59e10000000a114084/frameset.htm
under Datasource.
regards,
Sergio

Need to know data type which could take the result of - data TYPE RAW.

Hello,
I have the following Req:
I need to make a RFC call from one SAP system to SAP Banking Services system to retrieve Contract ID.
But the field contract id happens to be of TYPE RAW. (16 characters)
So my problem is - I need to know the data type could take the result (contract id) of that RFC call.
As the declration -> data: v_con_id Type RAW --> isn't a valid syntax.
Please help in this regard.
Thanks
Anoop

Hi
Check this link for RAW data type
http://help.sap.com/saphelp_46c/helpdata/en/9d/ab1b0f055b11d2806500c04fadbaa1/content.htm
As you have mentioned about the declration ->
data: v_con_id Type RAW --> isn't a valid syntax.
lets try another one assign a variable to RAW data TYPE and inturn assign v_con_id to that variable.
var_raw(16) type RAW,
v_con_id type var_raw(16).
I am though not sure just try out
Revert for clarification
Thanks and Regards
Srikanth.P

I tried private browsing not too long ago and i cannot remember a cool website i visited. Is there any way that I can access the web history?

Well I have a lot of people over and I recently got stumble. I don't like them seeing the things I have looked at because some of it isn't very tasteful. There was one site that I stumbled on and now I can't remember what it was. Is there anyway for me to retrieve the lost history?

Well I have a lot of people over and I recently got stumble. I don't like them seeing the things I have looked at because some of it isn't very tasteful. There was one site that I stumbled on and now I can't remember what it was. Is there anyway for me to retrieve the lost history?

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

Welcome to the Apple Community.
Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
Any responses you may receive may well be removed and would be wholly unreliable in any case.
If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

Is there any standard report which give all information about purchase orde

hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght.
thanks .

Hi,
Try following
MC$G PURCHIS: Material Purchase Val Selection
MC$I PURCHIS: Material Purch Qty Selection
Kedar K

Is there any standard report which give all info about purchase order.

hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic     Excise      insurance     Frieght.
Thanks.

Hi,
Following are reports for PO list.
ME2C           Purchase Orders by Material Group
ME2J           Purchase Orders for Project
ME2K           Purch. Orders by Account Assignment
ME2L           Purchase Orders by Vendor
ME2M           Purchase Orders by Material
ME2N           Purchase Orders by PO Number
Message was edited by:
        Vigneswaran S

Is there any way by which I can not use Thunar Sys Tray icon?

I am using stalonetray in OpenBox in Arch and when I copy-paste or cut-paste files in Thunar, a sys tray icon pops up. I don't want it to pop up.
Is there any way by which I can make it to not pop up?

Trilby wrote:
I haven't used thunar for a while - but I don't remember it ever doing this before. I just verified that it doesn't here (freshly installed thunar, and cut-pasted, copy-pasted, etc, and I didn't get a tray icon.
Are you sure this isn't some other tool, like a clipboard manager? Are their any tooltip popups or menus available on the tray icon and/or what happens when you click the icon?
No. I use only Thunar. When I hover on the icon it says that "1 file operation running" when a copy-paste or cut-paste operation happens and when I left click and right click on it, it shows the copying window of thunar. The icon shows two small yellow folders placed diagonally. It's the same icon that appears on the file operation progress window of Thunar. I don't know whether Numix has anything to do with the specific icon though.
Last edited by chosentorture (2015-01-11 00:13:32)

Is there any way through which I can stop download of my ABAP programs???

Dear all,
I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
Thanks in Advance
Sachin Gautam

Hi again,
1. In that case we cannot do much.
2. However,
   we can use
   the exit
   SEUED001
(fm is EXIT_SAPLS38E_001)
to restrict the program
in edit mode,display mode
etc etc.
depending upon the PROGRAM NAME.
I hope that serves your purpose.
regards,
amit m.

Is there any way that I could get pages on to my iPhone without buying it again, through the app store? I already bought the computer software.

Is there any way that I could get pages on to my iPhone without buying it again, through the app store? I already bought the computer software.

Sorry, no. Different versions for different operating systems.
Stedman.

Is there any default calendar which I can use on my form and report

Hi All,
Is there any default calendar which I can use on date field on my form and report.
just by change its property like double click on date field and property calendar = yes
or any other way.
thanks
mohan

hi
create a functions something like this.i hope it helps u.
function call_calender ( f_dtm_set in date default sysdate ) return date is
l_dtm date;
l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
begin
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
then
l_list := create_parameter_list ( 'CALL_CALENDER' );
add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
end if;
copy ( null, 'global.calender_date' ); --> create a null global
call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
if
not id_null ( l_list )
then
destroy_parameter_list ( l_list );
end if;
if
name_in ( 'global.calender_date' ) is not null --> if the global is not null, give the choosen item back
then
l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
end if;
erase ( 'global.calender_date' );
return ( l_dtm );
end;sarah

Is there any order in which records are stored in SessionDetails and Conferences Table in Lync Archiving DB?

Hi,
Archiving Database Schema states that in the tables SessionDetails and Conferences tables, the column 'SessionIdTime'
holds datetime value at which session request is captured by Archiving service.
But, is there any order in which the records are stored in the db?
Say, a session 'S1' starts at 1:00 PM and another session 'S2' starts at 1:05PM. 'S2' ends at 1:10 PM and 'S1' is still on going. I have observed that on ending the session the record is written to DB, so is it possible that details of session S2 is written
in db prior to 'S1'?
Is there any way to query these tables, in the order in which the records are stored?
Thanks and Regards,
Arjabh

Hi,
You can export records that have been stored in the Lync Server Archiving database with the following cmdlet in the link using Lync server manageshell.
http://technet.microsoft.com/en-us/library/gg398452.aspx
You need to write a SQL query/view or report server report to display the information.
More details:
http://blogs.technet.com/b/dodeitte/archive/2013/06/02/sample-lync-server-archiving-report-available.aspx
For the issue about “is there any order in which the records are stored in the db?” you can post a case to SQL forum and more experts will help to verify the issue.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Is there any process\service which can modify and count a Global fragment in a form(xdp)

Hi,
Is there any process exist which can count number of fragments or modify a fragment in a form (either in pdf or xdp).
Regards
Sunil Gupta

no there is no activity or process because global fragments are used in adobe lc designer for developing a form. when a form is created as a document then no concept of global fragment left. it gets embedded in form
regards

Is there any BCT Datasource which could extract The PO History data?

Similar Messages

Maybe you are looking for