Is there any Calendar examples available with anything like Outlook?

Hi,
I'm going to be creating a Calendar module to schedule tasks, meetings, etc.
Is there any Calendar examples available with anything like Outlook?
Thank you, Bill

Earl,
Send me the development link etc and I'll look at the Javascript errors.
[email protected]
Input: My thought was to have a Month area with the choices you have AND then be able to select the weekly choices TOO. The the day of the week TOO..
Ex: select June, July, Aug
Week 1,3,5 (if exists) or Weekly
If this is a copy, which I imagine it is, we could both add to it... or we could import another version and I could add onto it there...
What do you think... build on each others ideas... both save time in the long run??
Let me know, Bill

Similar Messages

Are there any DAQmx examples available for use with pci 6229 M series card?

I have been searching around for examples which work with the pci 6229 M series DAQ card. Most examples do not list this card as applicable and the one I have found gives an error. Is there anywhere specifically available, what I am particularly interested in is seeing an analogue channel being triggered by another analogue channel reaching a certain value.
Thanks
Kevin

Hi Kejoglo,
You are right in the fact that the M-Series card is newer than LabVIEW (and therefore the examples that are shipped with it) and therefore the example finder doesn't list the M-Series cards in the list of available hardware.
Basically though, the M-Series cards work with DAQmx and not Traditional DAQ so if you just go into the example finder and search under Hardware Input and Output>>DAQmx and choose an example from that folder to run on your M-Series card. As long as you don't try to do anything outside of the specifications of your card (which I doubt you will do) then you shouldn't have any trouble running any of the DAQmx examples on an M-Series card.
Hope this helps, if you still have problems then please feel free to write back.
Best regards,
Peter H
Applications Engineer
National Instruments UK

My Seagate 80GB EHD is shown in Finder Mac External Drive but it will allow action to Verify or Repair. If there any hope to fix with software like Paragon NTFS?

My Seagate EHD seems to have died long ago even though it was spinning, the LED was on and I thought everything was backing up automatically. Working by phone with an Apple CTU Advisor 03/15/2015 to correct iCloud Keychain Security Code prompts, we determined there is reason to suspect the Seagate EHD failed way back whenever. Before I give up on the Seagate I'd like to check and use all resources and advice of others. With guidance from Seagate Tech Support I ran their diagnostics procedure which failed at the Verify step. I presume the EHD cannot work and will probably have to replace it. Can anyone out there in A. C. help?

Are there files on the drive that you're hoping to recover? If so give DataRescue a try http://www.prosofteng.com/datarescue4/
it has a free demo you can try to see if there are recoverable files and if there are you then need to pay for the full version if your files are worth it. If you're not worried about files throw it away 80GB isn't worth fooling with.

Are there any other templates available besides those that come with numbers?

Are there any other templates available besides those that come with Numbers?

Hi David,
If you have Numbers '09 there is a Checking Register template that might suit.
Numbers can open Excel templates and documents. Do a web search for checking register spreadsheet.
Regards,
Ian.

Is there any free app available for iPad 2 so can do the work in MSWord, Excel, PowerPoint.

Is there any free app available for iPad 2 so can do the work in MSWord, Excel, PowerPoint.

I'm not aware of free apps that will let you work with Word, Excel, etc. There are however, paid apps, such as Pages and Numbers you can buy that will work for you.

Is there any corporate database available for Multisim12?

I'm trying Multisim12. Master database has a lot of components but I wonder there many simple and common ICs are missing while I have noticed that many of these components are readily available in Proteus etc. I'm especially talking about CMOS 4000 Chips which are the building blocks of a medium level designs. Example includes CD40110, CD4063 etc. and a lot more. I don't meant to prove Multisim useless but just have to ask that:
1. Is there any corporate database available that can be downloaded? or,
2. Can I import Proteus components in to the Multisim?
Please help me. Thanks and regards.

Hello,
No we do not have a corporate database. The one you get has all the components available in Multisim (depends on the edition of course). CD40110 is a a simple decade counter right? You should find that under peripherals and indicators. The CD4063 is a comparator. You can find a 4 bit magnitude comparator in the CMOS section. These are the modls for simulation, if you want to create your own package and symbol you can (so you could potentially add CD40110 package to your schematic for routing purposes if you transfer your design to a layout tool). You could also create a component called CD4063 using the SPICE model from the CMOS comparator sections. I don't know what models Proteus uses, but if they are SPICE or PSPICE it should work.
Kind regards,
Miguel V
National Instruments

How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?

How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?

You can not connect to the internet with a WiFi only iPad without WiFi. You can get a mobile hot spot from your carrier but that still connects to the iPad via WiFi and comes with a monthly data plan like a cell phone.

Is there any calendar /contact program that has the depth of power-on Now up-to-date that will run on Lion?

is there any calendar /contact program that has the depth of power-on Now up-to-date that will run on Lion?

This can be done easily with ethernet.
Please follow the instructions strictly.
To make it easier I want you to do this overnight so you can turn off all your current connection to the internet.
Just go to the airport fan in to the top right and turn airport off.
Get ethernet cable and connect the laptop to the TC lan port.. ie <-> ones.
Press and hold the reset on the TC for about 10sec. until the front led flashes rapidly.
Open the airport utility.. go to manual setup and change the wireless to off. (so other people around you cannot join your network of one).
Ignore all the errors.. they won't stop the backup working.
Go to the TM and reselect the backup target disk as the TC.
It should start after 2min and run through to completion.
That is it.. for a backup of many GB it might take a few hours.. so make sure the laptop has power plugged in and the sleep is off.. (on early ones I think this is needed but I am a late arrival to the scene).. sleep doesn't affect later OS.

Is there any Function module available for GR IR for purchase order

Hi
Is there any function module available in SAP to get the list of Goods Received and Invoice Reciept for a purchase order.
One way to create a custom fuction to fetch the details from MSEG and BKPF.
Can somebody suggest a better solution.
Thanks in advance.
Ruhi Hira

Which table in BAPI_PO_GETDETAILS exactly has these information ?
PO_HEADER_TEXTS
PO_ITEMS
PO_ITEM_ACCOUNT_ASSIGNMENT
PO_ITEM_SCHEDULES
PO_ITEM_CONFIRMATIONS
PO_ITEM_TEXTS
PO_ITEM_HISTORY
PO_ITEM_HISTORY_TOTALS
PO_ITEM_LIMITS
PO_ITEM_CONTRACT_LIMITS
PO_ITEM_SERVICES
PO_ITEM_SRV_ACCASS_VALUES
RETURN
PO_SERVICES_TEXTS
EXTENSIONOUT
NFMETALLITMS
Regards
Ruhi Hira

Is there any way, to create with Adobe Muse HTML-Mail Templates?

Is there any way, to create with Adobe Muse HTML-Mail Templates? or to convert the createt page to only html content? any other tool like an website copyer?
tanks for help!

Off the top of my head, you should be able to create mail templates in muse BUT it will require very basic html/css knowledge on your part. I am assuming you want to do just the signature?
Create the design you would like on one page, dont do any kind of styling in a master page. Then export the site into a folder. Open the html file with notepad/ textedit and then copy just the code for JUST the template. Throw it in you mail app of choice and it should work.
This seems like something that would be done alot quicker in dreamweaver in design view.
PLEASE NOTE: ^i could be completely wrong - but in theory this may work.

Is there any system table available to check no. of entries in the table?.

Hi
Is there any system table available to check the no of entries in the table.
Note : the table may be whether SAP table or Z-table.(All tables)
Regards
Raja.

Hi Raja,
I don't think so. Instead, try to perform
SELECT count(*) FROM dbtab.
...to get the number of records of the table dbtab.
I hope this helps. Kind regards,
Alvaro

Is there any standard BAPI available to vendor , customer and G/L ?

Hi all,
any standard BAPI available to vendor , customer and G/L? I found BAPI_CUSTOMER_CREATE and BAPI_VENDOR_CREATE but when i traying to execute , then control directly taking to XD01 and XK01 initial screen's .i need to create vendor and customer master data using BAPI(data will come from legacy system).
Other than these , is there any standard BAPI available .Pl tell me
Regard's,
Pratap.

Hello Pratap
For customer the following BAPI is available:
BAPI_CUSTOMER_CREATEFROMDATA1
"This fm uses a reference customer as template for the new customer.
" Using this BAPI you cannot create a new customer from scratch
Regards
Uwe

Is there Any alternate software available for the zen microphoto that allows me to

<SPAN class=postbody>I can only view the contents of my Zen microphoto as folders and files (i.e. it gives me a "Windows Explorer" type view of the contents) - I cannot view my Zen microphoto library in the same way as my PC Music Library (i.e. by Genre, Artist or Album) Is there Any alternate software available that allows me to see and organize my Zen microphoto library in the same way as my PC Music Library (i.e. by Genre, Artist or Album)

There is program in the App Store called Bookpedia that seems tailor-made for your situation.
http://itunes.apple.com/us/app/bookpedia/id408505152?mt=12
Bento is another easy to use database solution.
Or GoogleDocs has a spreadsheet application, free online, although not really specific to your application.
If you really are using OS8.6, as your signature states, you may look for an old version of FileMaker on eBay.
Good Hunting!

Urgent : Is there any c++ parsers available for reading tnsnames.ora

I have to parse the tnsnames.ora and get the connection string , host name , instance name , port etc .. and store it in my local memory structure . Is there any c++ parsers available , which parses and gives the desired output or do i have write my own parser .

You're right...the database connections work fine if I define them manually rather than reading them from the tnsnames.ora file.
I was hoping to have many users running SQL Developer so using the tnsnames.ora file might save people's time and reduce the number of database connection-related support calls.
If worse comes to worse, I can create an XML file to define the database connections. The only drawback to this is that we have an automated procedure to update people's tnsnames.ora whereas there is currently no way to keep the XML file up-to-date.

Is there any pen for iPad with retina display ?

Is there any pen for iPad with retina display ?

Yes. The Bamboo stylus is fully supported. Only the soft rubber tipped side. The Pen side obviosuly not.
Note all stylus that work with the iPad are noticeably thicker than a pen or pencil, so precision is not something you'll get much of.
Look at the link I provided, all those stylus work with iPad. See if you like one of those. Or if you can fnd one of those were you live.

Is there any Calendar examples available with anything like Outlook?

Similar Messages

Maybe you are looking for