Is there any certification and hand on course expire date..?

I got 'OCA' in NOV 27 and also hand on course 'Oracle Database 10g: Administration Workshop I' in the same on, and i want to take OCP exam next month, is there any expire date for both certification and course..?
THx

supererik wrote:
I got 'OCA' in NOV 27 and also hand on course 'Oracle Database 10g: Administration Workshop I' in the same on, and i want to take OCP exam next month, is there any expire date for both certification and course..?
THxNo, for your practical purposes there is no expire date. So you have no worries there.
I say for practical purposes, because at some point the 9i and then eventually the 10g certifications will be retired ... however 3 months notice will be given of this, but I suspect that is years and years ahead before retirement 9g certifications and many more years before the retirement of the 10g certifications (8i certification have only recently been retired)
However ....
What is very very useful for you to do, if you have not done so already, is to complete your hands-on course. This means you will get your OCP certificate a little quicker.
Checkout the certification FAQ's currently here : [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=82#5Q1A] and about completing your hands on requirement form here [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=99].
This form is a questionaire in the form of a test with 30 minutes to complete .... make sure you have your information at hand before you start and view over the associated tutorial before you begin.

Similar Messages

Is there any certification exam only related to workflow and workflow/cross

Is there any certification exam only related to workflow and workflow/cross apps

Hi KR,
to my knowledge SAP has stopped certifications for WF.
But Please check on sap.com
Aditya

Is there any certification for e-commerce business?

Is there any certification for e-commerce business?

Please check Oracle's certification FAQ website at http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=82#6Q14Ahead :
===========================
Q: Can I still get ATG certified? What should I do?
Ans: As of February 28, 2011, Oracle retired the current ATG Certification Program. This includes the ATG Certified Commerce Platform Developer credential and the following exams associated with this credential:
* ATG Commerce Developer Exam
* ATG Platform Fundamentals Developer Exam
In the future, there may be an ATG offering through the Oracle Partner Network (OPN) Certified Specialist Certification offerings. Check the Oracle Certification Program website for news about ATG certification.
===========================
Nitin
Edited by: nb on Jun 29, 2011 11:11 AM
Edited by: nb on Jun 29, 2011 11:11 AM

Is there any certification exam available for ios developement ?

Hi
Is there any certification exam available for ios application developement ?Like micosoft,.net,Oracle java
If anyone have knowledge , please let me know .I want to get some apple certification on ios application developement.
Thanks

None that I know of.
It's more impressive and useful if you write an app and get it published in the App Store.
That way you can show you aren't just a 'paper MCSD'.

Is there any Certifications for Weblogic Portals ?

Hi
Is there any Certifications for Weblogic Portals ?
like RHCE, JCP, MCSE ...
Thanks & Regards,
Siva VP,
[email protected]

Check out this link:
http://certification.bea.com/certification/dev_certification.jsp

I have an iPhone 4. I unplugged my phone during an update and have lost all pictures and videos from the last year. Is there any way to restore from a certain date to recover?

I have an iPhone 4. I unplugged my phone during an update and have lost all pictures, text messages and videos from the last year. Is there any way to restore from a certain date to recover them?

If you have a current backup you can restore your phone to that backup. http://support.apple.com/kb/HT1766

Is there any rules and regulations to do SOA projects ?

Hi All,
1. Is there any rules and regulations to do SOA projects thro' XI?
2. Is it necessary to use BPM for SOA projects?
Regards
Sara
Points will be rewarded for the helpful answers

HI,
See the below links
/people/kevin.liu/blog/2005/10/17/esa-soa-es
EAI:
http://en.wikipedia.org/wiki/Enterprise_Application_Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01bd5e9-1056-2910-00a6-cad748999126
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d19c8ee-0c01-0010-619d-92af980436d7
SOA vs ESA
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1a61c36-0301-0010-06be-d34e2f379a65
SOA - http://en.wikipedia.org/wiki/Service-oriented_architecture &
ESA - /people/kevin.liu/blog/2005/10/17/esa-soa-es
. Why SOA
/people/maxim.efimov2/blog/2006/08/22/the-roadmap-to-enterprise-soa-begins-with-150147-why148
SOA Foundations
/people/natty.gur/blog/2007/02/27/three-major-foundations-for-soa
2. SOA with SAP
/people/oleg.figlin/blog/2006/06/20/sap-discovery-system-for-enterprise-soa--part-1
/people/oleg.figlin/blog/2006/06/26/sap-discovery-system-for-enterprise-soa--part-2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c1cb4b2c-0e01-0010-c99e-c272197d970f
3.XI and SOA
SAP XI in SOA
4. /people/community.user/blog/2007/01/30/enterprise-soa-explorations-fragments
/people/sindhu.gangadharan/blog/2006/06/19/it-scenario-enabling-enterprise-services-with-sap-netweaver
5. /people/abdulla.fawzi/blog/2007/01/03/enterprise-soa-based-innovations-and-its-benefits
EAI & EBI
EAI
EAI and EDI
Also see this document on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
Regards
Chilla

Is there any tool to check whether the proper data is inserting or not?

Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
Praveen

Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints.

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??

I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Is there any transaction to view the customer master data ...

is there any transaction to view the customer master data ...i me all the datats so that ui can prepare a report......

Hi Sunaina Kumar,
From Funtioanl Point of view
XD02 or Xd03 - Chane / Display Customer Centrally ( With Company Code Data)
VD02 or VD03 - Change / Display Customer - Sale and Distribution( With out Company Code Data.
From Technical Point of View:
SE11 or SE16
Table Name : KNA1 or KNB!
From here you can view all the customer data.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Hi Is there any Certification Course on Adobe LiveCycle Workbench ES2

Can Any one let me know if there is any certification on Livecycle ES2?
What is the name of certificationo and duration require to study???

Adobe Acrobat X Pro build 10.0.1
Adobe Livecycle Designer ES2 build 9.0.0.2.20101008.1.734229
I also have this issue.
thanks
WoWRonin

Is There Any Certification in OAFramework

Hi Gurus ,
I googled for sometimes ,and tried to find if any certification is there in OAF ,i feel this forum will be best option if someone know that if any certification exam is being conduct by oracle ,please share the details.
Thanx
Pratap

Hi All ,
Thanks Ajay ,thanks Anil for your responses ,i asked this because because in few requirements for OAF positions ,certification ,was mentioned ,so i got confused ,bcz i was also aware that there is no such certification yet.
Thanks
Pratap

Is there any "Search and Replace" option in Crystal Reports?

Is there any option to search and replace in Crystal Reports. Since i am using a name in many of the formulas in crystal reports. I need to replace with the desired name on the go.
Could anyone help me on this....

Search & Replace across formulas is not available in CR XI but is available in CR 2008. Here is an excerpt from the CR 2008 Users Guide:
Searching for formula text
You can use the Find dialog box to carry out a number of different activities:
u2022 Search for text or characters in the Field, Function, or Operator trees.
u2022 Search for text or characters that you want to mark or replace in the
formula, Custom Function, or SQL Expression that you have open.
u2022 Search for text or characters across all SQL Expressions in a report.
u2022 Search for text or characters across all formulas and Custom Functions
in a report.
When you search for text across all formulas, the results appear in a pane
at the bottom of the Formula Workshop. (You can dock the results pane in
other locations). When you click an item in the results pane, Crystal Reports
opens the appropriate formula and highlights the matching text.
Tip: You can open the Formula Workshop to search across all formulas
from the Field Explorer and from the body of a report. To do this, select a
formula field, right-click it, and choose the "Find in Formulas" option.

Is there any reliable and free add-on for itunes that automatically adds lyrics to songs in my library?

I'm trying to find an iTunes add-on that will automatically add lyrics to all the songs in my library. They are ripped in AAC format. I'm using XP with SP3, and iTunes 10.5. As I have over 6000 tracks in my library, you can understand that adding them all individually would take the kind of patience a saint would envy.
So far I've tried and add-on (the name of which escapes me) which claims to be compatible with iTunes, WMP and WinAmp but, in reality, only works with WMP - and the songs it scans aren't actually in my library. I've also tried SoundCrank but every time I try to install the **** thing it tells me I need to install a version of iTunes that is 7.0.1 or later. I did mention I'm using 10.5 right?
Are there any other alternatives that are reliable and free (or at least really cheap)?

http://www.apple.com/support/contact/
This can point you to authorized repair places. But doesn't list unauthorized ones, which may be what you're wanting.

Is there any quick and dirty way to determine what something will look like

Hi,
Is there any way (rule of thumb) to determine what something will look like when printed.
for example.
I am doing a composite (hope this is the right word). It will have some people sitting at a table and I want to have another layer with another picture behind it.
I plan for the output to be fairly small (print size), say 4 x 5 or whatever.
Now, if I go to the internet and google (or mamma.com) and search for images (large) and it comes back to me, I will see pictures that are (for example) 800 x 526 pixels 367 kb, or 940 x 480 pixels 166 kb.
I would have to assume the 367 kb will print at better resolution, but if i liked the 166 kb picture better, is there a quick and dirty way to determine if it would print better (say 250 or 300 dpi or whatever) or not?
So, bottome line,
Assume my output picture will be 4 x 5 (and I want 300dpi (or is it ppi)
How do quickly look at google results and determing if they will print ok?
Bob

The closest to a one click fix in photoshop cs-cs5 is
Image>Adjustments>Shadow/Highlight or opening the
image through camera raw and using the recovery slider.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-765da.h tml
MTSTUNER

Is there any certification and hand on course expire date..?

Similar Messages

Maybe you are looking for