Is there any chance that Tab Grouping feature (like the one in Opera 11) will become native for Firefox? Could be very helpful.
Is there any chance that Tab Grouping feature (similar to Opera 11) will appear in Firefox? Could be very helpful and convenient.
Hi ThaPlaya,
I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
Sorry to infiltrate your post...
Dawn/Flower1964
Similar Messages
-
Is there any chance that I can get a video chat
Is there any chance that I can get a video chat (like I recorded) that I had a few days ago? It is very important for me, please reply me back if you know something, thanks
This is the only Moto phone when it comes out that can be used on Verizon Prepaid..
http://www.droid-life.com/2013/11/13/moto-g-is-coming-to-verizon-prepaid-in-q1-2014/ -
Is there any chance that FM reception gets made available on the next iPhone model?
Hi,
I did buy an iPhone 3G then upgraded iPhone 4 but always felt that Apple's devices missed a very useful function (and hoped that it would eventually be made available), FM reception! Now I have that cool iPhone and yet I have to have my iPhone to listen to my MP3s and a FM radio to be able to listen to the gym FM broadcasting or listen to my favorite FM station which doesn't broadcast on the internet! And I definitely don't see myself forking away a hundred on an iPod Nano just because of its FM receiver!!!
Is there a hardware limitation preventing iPhone 4 from receiving FM broadcasting?
Is there any chance that FM reception gets made available on the next iPhone model?
Please give your iPhone customer FM reception!!! PLEASE!!!!!!We're all just fellow users here and have no idea what Apple might have in mind for future iPhone versions. You can offer your suggestion to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/iphone.html
Regards. -
HT204387 Is there any chance that I can swap my ipad2 to ipad air?then how much will it cost?
Is there any chance that I can swap my ipad2 to ipad air? How much will it cost?
Denec wrote:
Is there any chance that I can swap my ipad2 to ipad air?
No.
How much will it cost?
Full price.
You can "recycle" it thru Apple and get an Apple store gift card you can use towards a new iPad.
See this -> http://store.apple.com/us/browse/reuse_and_recycle -
My iphone 4s power button is stuck. Is there any chance that it can be fix?
My iphone 4s power button is stuck. is there any chance that it can be fix?
This will be covered for free under Apple Warranty. Until you do this, a software workaround is a Virtual Lock Button in Assistive Touch on iPhone. Tap Settings App>General>Accessibility>Assitive Touch>ON>Tap new Virtual White Screen Button>tap Device> tap Lock Screen. If you hold down on the Lock Screen Icon it will give you the "slide to power off". To turn iPhone ON, connect to Power Source with USB Cable, via Charger or Computer USB Port.
-
Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?
Once the Lion download is complete quit the installer and follow these directions. The file you need to make a boot disk disappears after you install Lion.
Egg Freckles | Burning A Lion Boot Disc
However, the Lion installation includes a recovery partition. It won't be of help if your entire HD dies but is very handy otherwise. This Knowledge Base article has a lot of good information about Lion's recovery partition.
OS X Lion: About Lion Recovery -
Is there any app that allows me to control the cell phone from the computer with the mouse?
Is there any app that allows me to control the cell phone from the computer with the mouse?
No this is not possible.
But you could use the iPhone Simulator of Xcode if you have access to an Mac. Like the name explains, it simulates an iPhone on an Mac, but you cannot use all standard apps -
heey guys whats up listen i have a problem i lost my iphone and it has all my pic's and some information that i really really need it what should i do .... is there any way that i can get back the i phone ??? please help me
You can look for it.
If you find it, you will have it back.
If you had find my iphone activated on the iphone BEFORE it was lost, then you may be able to track it. -
I have purchased my iPhone 4S from USA. Its a Factory unlocked phone. I am facing problem with the hardware. Is there any support that apple provides to send the phone from India to USA to get it replaced? Also if there is any travelers Policy?
No and no.
-
is there any way to know when (and/or whether) a particular tv season will be available for purchase on itunes. i'm particularly interested in:
the 2nd season of "homeland,"
the 5th season of "damages"
the 7th season of "dexter."
thanks.Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.
-
My buttons dont work and i wanted to know if there are any substitues that i can use with the home button.
Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced. -
Is there any function that output address by inputing the address no.?
Is there any function that accept an address number as input paramenter and return an address so that I don't need to build it myself?
Thanks!FU ADDRESS_INTO_PRINTFORM ADDRESS_TYPE
Text
Address type: 1,2,3 or ' '(default)
Description
There are three address types:
Address type '1': 'Normal' address (company or organization); the address structure used in most SAP applications as 'Address'.
Address type '2': Address of a person
Address type '3': Work address, usually the address of a contact person in a company
The default address type SPACE is treated as type '1' and is required for the upwards compatibility of the function module.
The interface parameters ADRSWA_IN and ADRSWA_OUT are only used in address type SPACE.
The other address types use:
ADDRESS_1 or ADDRESS_2 or ADDRESS_3 for the attributes, and
SENDER_COUNTRY, RECEIVER_LANGUAGE, NUMBER_OF_LINES, STREET_HAS_PRIORITY and LINE_PRIORITY for control.
The parameters COUNTRY_NAME_IN_RECEIVER_LANGU, LANGUAGE_FOR_COUNTRY_NAME and NO_UPPER_CASE_FOR_CITY are address type-independent.
The address attributes can be read directly instead of being passed in the structures ADDRESS1/2/3, if the address is in the Central Address Management tables.
The Business Address Services keys must be passed instead of the structures ADDRESS1/2/3:
Address type 1: ADDRESS_NUMBER
Address type 2: ADDRESS_NUMBER and PERSON_NUMBER
Address type 3: ADDRESS_NUMBER and PERSON_NUMBER
The following parameters are used (Import) or filled (Export):
Address type 1
Import parameters:
ADDRESS_1
ADDRESS_TYPE
ADDRESS_NUMBER
SENDER_COUNTRY
RECEIVER_LANGUAGE
NUMBER_OF_LINES
STREET_HAS_PRIORITY
LINE_PRIORITY
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADDRESS_PRINTFORM
ADDRESS_SHORT_FORM
ADDRESS_SHORT_FORM_S
ADDRESS_DATA_CARRIER
ADDRESS_DATA_CARRIER_0
NUMBER_OF_USED_LINES
NAME_IS_EMPTY
ADDRESS_NOT_FOUND
ADDRESS_PRINTFORM_TABLE
Address type 2
Import parameters:
ADDRESS_2
ADDRESS_TYPE
ADDRESS_NUMBER und PERSON_NUMBER
SENDER_COUNTRY
RECEIVER_LANGUAGE
NUMBER_OF_LINES
STREET_HAS_PRIORITY
LINE_PRIORITY
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADDRESS_PRINTFORM
ADDRESS_SHORT_FORM
ADDRESS_SHORT_FORM_S
ADDRESS_DATA_CARRIER
ADDRESS_DATA_CARRIER_0
NUMBER_OF_USED_LINES
NAME_IS_EMPTY
ADDRESS_NOT_FOUND
ADDRESS_PRINTFORM_TABLE
Address type 3
Import parameters:
ADDRESS_3
ADDRESS_TYPE
ADDRESS_NUMBER und PERSON_NUMBER
SENDER_COUNTRY
RECEIVER_LANGUAGE
NUMBER_OF_LINES
STREET_HAS_PRIORITY
LINE_PRIORITY
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADDRESS_PRINTFORM
ADDRESS_SHORT_FORM
ADDRESS_SHORT_FORM_S
ADDRESS_DATA_CARRIER
ADDRESS_DATA_CARRIER_0
NUMBER_OF_USED_LINES
NAME_IS_EMPTY
ADDRESS_NOT_FOUND
ADDRESS_PRINTFORM_TABLE
Address type SPACE (default value; the previous interface up to Release 3.0B):
Import parameters:
ADRSWA_IN
ADDRESS_TYPE
ADDRESS_NUMBER (only for special cases such as Japan)
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADRSWA_OUT
NAME_IS_EMPTY
ADDRESS_PRINTFORM_TABLE
The following parameters correspond to each other (on the left the individual parameter - on the right the fields in the old interface structures ADRSWA_IN and ADRSWA_OUT):
ADDRESS_NUMBER - no equivalent
PERSON_NUMBER - no equivalent
SENDER_COUNTRY - ADRSWA_IN-INLND
RECEIVER_LANGUAGE - ADRSWA_IN-SPRAS
NUMBER_OF_LINES - ADRSWA_IN-ANZZL
STREET_HAS_PRIORITY - ADRSWA_IN-WAREN
LINE_PRIORITY - ADRSWA_IN-PRIOR
COUNTRY_NAME_IN_RECEIVER_LANGU - no equivalent
LANGUAGE_FOR_COUNTRY_NAME - no equivalent
NO_UPPER_CASE_FOR_CITY - no equivalent
ADDRESS_SHORT_FORM - ADRSWA_OUT-LINEK
ADDRESS_SHORT_FORM_S - no equivalent
ADDRESS_DATA_CARRIER - ADRSWA_OUT-LINED
ADDRESS_DATA_CARRIER_0 - ADRSWA_OUT-LINED0
NUMBER_OF_USED_LINES - ADRSWA_OUT-ANZZL
NAME_IS_EMPTY - no equivalent
ADDRESS_NOT_FOUND - no equivalent
ADDRESS_PRINTFORM_TABLE - no equivalent
The parameters are described in the parameter documentation. -
I hate to beat this to death but I was unable to find a
clear answer to this question. Does NI provide Excel control from within
Visual C++ 6.0?
I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
Thread : "Re: Benifits of using measurment
studio for VC++ 6.0?"
NI REP : drohacek
Quote : "we made the decision to support Visual
C++ 6.0 users only through the ANSI-C interface and not through the Measurement
Studio MFC-based class libraries."
If there is a suggested way of controlling Excel from within Measurement Studio
for Visual C++ 6.0 then I’d love to know it.
If not, can a plain statement be made basically stating that if you want
to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
Studio support?
With .NET of course you can just decide to have Excel support added during
project creation. CVI can act as an ActiveX server and easily control
Excel just by building off the examples shipped with CVI. I see that
there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
for taking existing CVI projects and converting them to Visual C++ 6.0 projects
or for calling CVI libraries from a .dll from within Visual C++ 6.0. I suppose I could do the work
in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
What I'm really after here is a visual graph control like the one in CVI that I
can use from Visual C++ 6.0. I purchased a 3rd party graph control for use
in VC++ 6.0 that works well but isn't really visual. I mean you can't
enter any values in it until you run the program and fill it out programmatically.
Then you can see which columns are two narrow, quit the program, adjust the
column width of your now empty control, and repeat, until you get the thing
looking the way you want. If I could call into Excel from within Visual
C++ 6.0 the way I do from within .NET
then I could use Excel to hold the table and just read in the values into my table
control at run time. Basically I'd use Excel as a visual development tool
for all my tables.
I do all my coding from within CVI and Measurement Studio for Visual C++
6.0. I'd use CVI for everything if I didn't depend so heavily on certain
outside controlled C++ .dll's. Could you please suggest then what I can
do to get Excel support for Visual C++ 6.0?
Last question :
Is there any plan to ever have a NI table control like the CVI table control for
use in Visual Studio? One that you can
completely set up before you do any compiling?
I imagine that the way Microsoft sets up their environment makes this idea impossible. Otherwise someone would
have come up with a truly “visual” table control before now.
Thanks,
Grant
Grant M. Johnson
Project Engineer
LECO CorporationHello Grant
You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
Here is one that talks about VC 6.0 and Excel.
Here is a code project article about this.
Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
See this document for more information about the Excel object model.
I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
To summarize
- Yes, you can use Excel with Vc++ 6.0 without mstudio.
- Try using the Datagrid Activex control if you just need a table.
- Measurement Studio provides high-level excel and word classes for VC++ 6.0
- Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
- Measuremnt Studio does not have a table control.
- VC++ 6.0 is really really old. Have you considered upgrading?
Bilal Durrani
NI -
my small sisters attempted to open my ipad several times and it got disabled.... i have never synced my ipad with any pc nor i have never made any backup in anyway.... i thought i could recover it after resetting... i made a factory reset through itunes and all my data was lost...... is there any way to recover my photos and videos back.....
- If you used PhotoStream then try getting photos only from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
Hi Guys,
I am a bit worried as yesterday I received an email saying my account details changed and that was for my billing address. I havent done this and so amazed, have a doubt on someone who is probably not in the country at the moment. just want to confirm if there is any way that i can trace the ip address or location that from where its been changed. (I have changed everything after this though but still feeling insecure)
Please advise
Many Thanks,
UmmaraUmmara wrote:
I am a bit worried as yesterday I received an email saying my account details changed and that was for my billing address. I havent done this ...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Html file to run an Applet using swings in 1.4.1 or 1.3.1
Can anyone send me an html document to launch the applet in a browser. I have very basic html, but I need one that uses the appropriate plug-in and that has parameters such as height, width, etc. My applet uses tabbed panes, dialog boxes and combobox
-
Hello, I've got 4x ISE appliance, 2x Administration and 2x PSN 1 Administration primary / Monitoring secondary 2 Policy Service Node 3 Administration secondary / Monitoring Primary 4 Policy Service Node Both PSN's are in the same Node Group... ISE is
-
How to create a text Component With Certain Properties
I need to create a text component with the following properties: Has Capability to be italic, right/left aligned, have different background / foreground colors, and most importantly, the ability to have a fixed width and a height that is set by the a
-
This is to send the data from SAP to third party system . For data mapping, we have used the exit 'EXIT_SAPLRHA0_003' in the enhancement 'RHALE001' . Iam using the message type 'HRMD_A' and the basic type 'HRMD_A07' . I have activated the change poin
-
Download to Excel 2000 Functionality
Hi, I use the "Download to Excel 2000" functionality in OBIEE. When i see the output in Excel,columns B and C of excel get merged and display the second column in my report The point here is the first column in the report also has the same property a