Is there any codec for QuickTime Player ?

Is there any codec for QuickTime Player ?

Do you mean are there other codecs you can install and play in QT, yes there is, just this and it will take care of them all just about.
http://perian.org/
If you don't have Flash, install it here
http://get.adobe.com/flashplayer/
Others are Silverlight (free) and Flip4Mac (payware) for protected Windows media files.
You can also install the free VLC player, it plays a lot too.
DivX, I don't know about, VLC likely can play that.
There is also RealPlayer, but I think that's dropped off the face of the planet

Similar Messages

  • Updates to codecs for Quicktime Player

    I want to update codecs used by QuickTime player 7. Do I just use the update feature in the program, or do i need to manually update the codecs online somewhere?

    QuickTime includes the most commonly used codecs with each install. When you encounter a file that you don't have the proper codec to view you may be directed to the third party component page offered by Apple.
    But it doesn't tell you which to install because it doesn't actually "read" the file. It only knows that something is missing.
    Best practice would be to use the MOvie Info window on files that give you trouble. You'll be able to view the codecs used in it and need only do a Google search to find what you need.

  • Problems with mpeg2 codec for quicktime

    I just downloaded the mpeg2 codec for quicktime and installed it. My computer doesn't recongnize it and I still can't play mpeg2 clips. When I check the video codecs installed on my computer, the mpeg2 codec doesn't appear in the list even if I did install it. I'm using windows XP. What can I do?

    The QuickTime MPEG2 Component comes with an installer. Did the installer run? Did it show any errors?
    It is working for me in QuickTime on Windows XP.
    Note: Even with this component there are some limitations. It cannot play AC3 sound tracks. It should however be able to play MPEG2 video from .m2v or .vob or .mpg files.

  • HT3775 Can someone direct me as to how I check whether I have the media formats and codecs that QuickTime Player can play back using my Mac Pro?

    I'm trying to use quicktime on my macbook pro but I receive the message below when I make an attemp to use it.  Any suggestions?
    Media formats supported by QuickTime Player
    QuickTime Player natively supports the following media formats and codec components. You can also extend QuickTime to support additional codecs and components.
    Below are the media formats and codecs that QuickTime Player can play back in Mac OS X v10.6.x or later:

    More alternatives to Quicktime. VLC is recommended a lot.
    Video Player - Divx
    Video Player – Flip4Mac
    Video Player - VLC

  • Scripts for Quicktime Player ???

    Whatever happened to the Apple Scripts for Quicktime player that worked with Quicktime Pro so that you could merge two movies, cut out segments, etc. The old set I have worked with Quicktime 6.5.5 but are dead now.
    TIA.

    Ironic, isn't it.
    Today is QuickTime version 7's fifth birthday. 5 years without any additional Apple involvement in the AppleScripts that worked so well in version 6.
    The move from version 6 to 7 also lost support of other features found in version 6. No more .swf files. No editing MIDI instruments. No more "free" rotation of video tracks. No more "transparency" for colors (no more color wheel, either). No "sprites" editor.
    Features found in QuickTime 3 and 4 are also gone in later versions. Simple things like cross fades and transitions require 12 year old PPC apps that are hard to find.
    Those of us that answer questions here do not work for Apple. We are just users like you.
    It seems like Apple is moving toward Automator "actions" and away from AppleScript. But the dictionary for QuickTime Player is pretty slim.

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

    Hi Experts,
    In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
    Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
    thanq

    hi
    check these links out
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    regards
    vijay
    reward points if helpful

  • I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    Try this:
    Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
    If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
    If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

  • I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

    I have an external hard drive of the brand Western Digital.
    Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
    When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
    And now I wonder: is there any way for me to get back my lost files or are they lost forever?
    Thank you in advance!
    //Gina

    A data recovery specialist or some data recovery programs should be able to help.  Most format simply rewrite the directory tree saying no files are on this disk.  The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them.  Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone.  This type of format takes a long time to complete.
    I'm not making a recomendation of a particular program but here is one company that does what you ask:
    http://www.remosoftware.com/mac-recovery  The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
    Good luck and don't write anything on the freshly formatted disk until you decide what to do.

  • Is there any option for voting on a list item in SharePoint 2013?

    Dear All,
    I am looking for a feature vote a for list item from multiple users and need to show consolidated results on that.
    for SharePoint 2013 we have "like", "rating" by using these can we show the consolidated results.
    otherwise is there any alternative for this.
    Thanks & Regards,
    Jithendar

    I haven't seen any OOB vote feature in sharepoint list. It's better to go with "like" or "ratting" options.
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

  • Is there any hope for a Nano 6th gen that went through the washing machine?

    Is there any hope for a Nano 6th Gen that went through the washing machine?  All of the devices contents are showing up in iTunes when connected but the device itself is not working.

    Hello kpratta,
    There is some hope. I have heard of someone putting the ipod in a bag of dry rice and putting the bag in a dark place for a 4-5 days. After that they used this:
    www.apple.com/support/ipod/five_rs/
    This has the best chance. The rice absorbs any liquid in the ipod.
    Hope this helps.
    ~Julian

  • Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page.  Is there any reason for this?  I've been updating the app everytime and now it's not letting me in

    Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page.  Is there any reason for this?  I've been updating the app everytime and now it's not letting me in.  Pls advise. Tq

    Reset the device, restart the device, try downloading any other app.
    All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

  • Is there any way for me to get my music off of my iPod?  I had to get a new computer and no longer have my files...but most are cds

    Is there any way for me to get my music off of my iPod? I had to get a new computer and no longer have my files, most of it is cds...

    Your iPod can only be synced with one computer at a time.  If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
    Before doing anything else,  authorize the new computer with your iTunes Account.  In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
    Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
    iOS: How to back up
    Now onto synced content such as music, videos, photos, etc.  For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases.  For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier.  Here is more on backing up and restoring your iPod.
    iTunes: Backing up, updating, and restoring iOS software
    If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud.  See this article for information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • I recently gave my old iPhone to my nephew, he switched it to his phone account, but somehow I now have his contacts on my new iPhone 5. When I look at my iCloud account, it lists his contacts. Is there any way for me to get my contacts back?

    I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?

    This is caused by using the same iCloud account on both phones.  When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account.  To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores). 
    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
    As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source.  You could try restoring to your last backup but this doesn't always work for contacts.  (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.)

  • I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    Check this thread where people have already given their suggestion on learning SSIS
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
    I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
    Happy Learning!!
    If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

Maybe you are looking for

  • My push notifications for facebook, twitter, and mail completely stopped working!

    after the ios 6 update everything WAS working fine before that ... all settings are set right i have tried multiple master resets and normal resets deleted the app and reinstaled it turn notifications off and on and pretty much read every forum i can

  • My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7

    My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7. Is anyone else experiencing this? I was able to print from my iPhone up until I updated to IOS7.  Is there a fix for this?  Thanks!

  • Network and Sharing Centre problems (again)

    I seem to be tearing my hair out once again with the Network List Service. Several months back the Network and Sharing centre stopped displaying or reporting the active networks, although I was connected with internet access. A consequence was most o

  • Assigning value to the dynamic item

    Hi All, I am trying to achieve the following 1. Create a program unit that passes the block name and item name 2. Build :<BlockName>.<ItemName> and assign the value say 'Yes' / 'No' based on the condition. 3. I do not want to hard code the block name

  • Enhancement request on remote block record access

    Writing code in forms to deal with information in "detail" tables, i.e. potentially multirecord tables with a probable foreign key relationship to some table or field elsewhere iin the form, is a bit problematic currently. As far as I know the only w