Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1 ?

Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1

A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

Similar Messages

  • Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.

    Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks?  Don't want to download Yosemite.  Not hearing good things about it.  I'm on Mavericks 10.9.5.

    one obstacle, quickly removed. thank you.
    nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
    i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

  • Are there any compatibility issues with AirPort Extreme 802.11n and Maverick OS X

    Are there any reported issues?

    Welcome,
    The only issue is that the "old" Airport Utility (5.6/5.6.1) doesn't work with Maverics and you have to use the 6.3.2 version.
    Having said that I use it with 6 AP (mixture of AX's and XE 2s) just fine with over 20 devices hanging off them and all Mac on Maverics.
    It may depend on which Airports you have, if they are supported by the new Utility you should be fine, as ever YMMV!
    Regards,
    Shawn

  • Are there any compatibility issues between Firefox 6-beta and Norton internet security?

    I received a warning before installing it that Firefox 6-beta is incompatible with the Norton toolbar - does this imply any deeper compatibility problems with Norton?

    That "test" only implies a number is incorrect in the add-on, nothing more should be read into that message.
    Norton, and many other security software vendors, don't usually support pre-release Beta version web browsers. Firefox only checks the '''maxVersion''' specified in the install.rdf file for the extension that is installed in Firefox, which is a very minor point as far as "compatibility" goes, and that is "set" by the developer of the add-on. The burden for true compatibility is on the developer.

  • Help!!! Is there any compatibility issues between Seagate 7200.7 & K8N Neo

    Hey Guys, need help here, I posted a boot & restart problem a few weeks ago (posted here PC Freezes, Monitor Blank, Power LED ON & Fans Spinning), ever since I bought this seagate 7200.7 80GB sata drive i've been getting weird troubles, anyway i thought its been fix when syar2003 suggested to put it into port 3/4 and also just bout 2 days after that i bought this new PSU. since then havent been using my rig a lot coz of my work, anyway i got a few days timeoff from work so i could spent more time with my rig ehehehehe.
    Well I notice that i was still getting random restarts & freeze specially when my rig is idle, downloading & surfing mainly, CnQ is off, havent been doin OC, MemTest86 shows no error with my RAM. Anyway the problem seems to have gotten worse just about 2days ago, i left my PC turned on downloading some torrents, while i was doin some chores at home, while i noticed just about for every hour it keeps on restarting, so i was kind of worried, ive check event viewer in Admin tools it doesnt show any apps error, so I did some troubleshooting, funny thing is while i was using it, it just froze on me but HDD light is active, anyway I restarted it took about 5-6 mins. to detect the seagate drive booted to windows but froze again w/ HDD light still blinking. I immediately loaded up SeaTools to check for bad sectors on this new drive to determine if its defective, on the first run just about 16% percent it started showing bad sectors but something was fishy HD is not responding anymore, I mean it's as if it wasnt there being accessed by the PC, I left it off for an Hour, check cables & stuff, loaded up again SeaTools weird thing is it passed perfectly no Bad Sectors on the second run, i did some benchmark no change in performance, and up until now almost a day, it has not been acting up on me, and ive been up all night.
    need help guys thanks, sorry for the long post, it had to be detailed, ive been up all night thinking whats wrong, i decided to ask for help...

    I don't know about the NCQ feature and how it affects running drives
    w/native NCQ on NF3 250 .It was a speculation only .
    But the coincidence with yours and the guys with maxtor DM10's brings me
    to think this could be the culprit .
    The disks i have maxtor DM9's sata 150 works like a charm .
    They also have both molex and satapower connector so you can choose witch to use.
    I had so many strange things happening with the seagate so it will will be
    lying in the drawer and collect dust i guess .Didn't take the chance using it .
    I did though have a slight overclock using it on sata1/2 but way below 230
    (only 12mhz overclock made corruption and even at 200mhz).
    Strange thing happend to me to with seatools (like your experience),
    that it reported a bunch of errors and suggested rma.
    But tested on another pc it is completly okay.
    Perhaps todays bios handle it better , i don't know . And it's hard to
    test atm as it will mean breaking my 0+1 raid .
    What i remember was making it work okay was :
    -on port 3/4
    -changed hidden setting under IDE setup , from disabled to enabled automatic block mode
    -Using Microsoft IDE drivers

  • I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

    I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

    Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

  • I am frequently unable to join the internet or it runs very slowly.  I have a Time Capsule in my LAN. Are there any compatibility issues with Time Capsules and any ISPs?

    I am frequently unable to join the internet or, if I can, it is exceptionally slow. The ISP says nothing is wrong ontheir end.  Are there any compatibility issues with any ISPs when using Time Capsule and/or iMacs?

    Tried this several times to no avail.  I believe it is the ISP causing the problem...Time Warner.

  • Are there any compatibility issues with Sonos and Airport extreme??

    are there any compatibility issues with Sonos and Airport extreme??

    Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
    On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
    In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
    These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
    In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

  • Compatibility issue between your power management system and Windows 8.1

    I have purchased a new Lenovo Ideapad S410 and have this problem.
           Compatibility issue between your power management system and Windows
           It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
           If you'd like to know more, you can search online later for this error:
    VIDEO DXGKRNL FATAL ERROR
    Please help! My laptop is only 5 days old.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Compatibility issue between your power management system and Windows,

    Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Are there any compatibility issues with Captivate and OS X Yosemite?

    Has anyone noted any compatibility issues with Captivate and Yosemite?

    I had the same issue. Updating resolved this as well.
    I tested with Captivate 7 and almost everything seemed to work fine. I tested with an existing project file containing TEB's, Motion recording, a third party drag 'n drop widget, and a playbar with a TOC. This all seemed to work fine both in preview mode as after publishing. I also tested with Captivate 6 although I didn't publish anything. Here, everything seemed to work fine as well. However this was only SWF.
    As jpm226 described for 8, previewing HTML5 doesn't seem to work with Captivate 6 and 7 either. Chrome gives a "This webpage is not available" notification. Publishing however, does seems to work.
    Fortunately, the client we work for that asks us to use Captivate 7, also asks for SWF output. So I'll continue to use Yosemite for now.

  • Seagate ST8000AS0002 8TB 5900RPM 128MB Cache SATA3 - for Backup Data Only. Are there any compatibility issues with an older  3,1 Apple Mac Pro 8-Core 2.8GHz (4-Core x 2) ?

    Finally mass storage drives are being released. The Seagate ST8000AS0002 8.0 TB 5900RPM has just been released in Australia and I was advised to check on any compatibility issues, being that my 3,1 Mac Pro is an old, but working fine machine.
    I have read there are possible issues with using HDs greater than 2TB with the MP 3,1 . But checking with OWC, they say the Seagate 4.0 TB Solid State Hybrid Drive is compatible for use with the MP 3,1.
    So can the hardware and operating system handle an 8.0 TB of this sort ?

    The problem is with formatting the large disk. The Mac can see and use them if formatted for a Mac
    Format large disks
    That bug appeared in 10.8.4, and has not yet been fixed.
    using a Disk Utility from any older Mac OS X, including the 10.6 DVD (if your Mac can boot from it) or any saved Installer DVD or thumb drive will work.
    Another work-around is to move that drive to an external enclosure and Erase it there (provided your enclosure is modern enough to deal with drives over 2.2TB.

  • Is there any compatibility issue to connect Oracle server with newest vers

    I wanted to know that can we connect Oracle server 10.2.xxx with latest client like 11.2.xxx. Is there any compatibility or Interoperability issue

    user10656964 wrote:
    I wanted to know that can we connect Oracle server 10.2.xxx with latest client like 11.2.xxx.yes
    Is there any compatibility or Interoperability issueno

  • HT4623 Is there any compatibility problem between iPod 4 and Bose docks?

    Is there any compatibility problem beteween ipod touch 4 and Bose docks?

    What does Bose say? Make sure you look for a 4G with iOS 6.
    I do not recall being aproblem with iOS 6 but with 7 I think yes.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the dock
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • Should I expect any compatibility issues by working partly under Windows and partly under MAC OS?

    Apologies if this point was already raised but could not find the answer.
    I am considering the creative cloud in an environment where the same files will be worked within windows and MAC environment.
    Should I expect any compatibility issues or difference with such a setup.
    thanks in advance.

    Hi JLCbac,
    Files do support cross platform workflow, however, there are certain limitations to it.
    Kindly refer the below mentioned links for more info.
    Link 1 : Adobe Premiere Pro Help | Cross-platform workflow
    Link 2 : Re: Mac-made PSD can't open on Windows
    Thanks,
    Atul Saini

Maybe you are looking for

  • HP Pavilion P7-1141 will not shut down... Any thoughts?

    Brand new HP Pavilion P7-1141 desktop (AMD A8-3800 quad-core CPU, 8GB RAM, 1TB HDD, Radeon HD 6550D, Windows 7 64-bit) will not shut down properly regardless of what I do - I can press on/off button on the desktop, or choose "shut down" from Windows

  • Can't connect via Built-in ethernet

    Can connect to internet via AirPort, but not by Built-in Ethernet. Network status says "The cable for the Built-in Ethernet is not plugged in". BUT it is and it is live because I have plugged it into another computer and it works fine. How do I check

  • Screen sharing performanace differences on MAC and WINDOWS

    Hi All I am having a big issue of screen share latency (working on WINDOWS) which is about to 20 - 30 sec sometime and 10 - 15 sec in general. I was thinking that It could be because of my network limits but when on the same time and in the same netw

  • Add help matchcode on report

    Hi guys, i need that the help match code apperas in one select-options parameter. Select-options: PERNR for PA0001-PERNR , the one i need is the same i use in se51 (screen painter), in help search is: EHS00SHLP_PREM i need something like: Select-opti

  • KM document iview with HTML content not showing pictures

    Hello Experts, I am currently working on integrating a HTML page into the portal. As it is just a static page the decision was made to implement it via KM. Now when I create a "KM documents iView (w/o filter)" and point the path to the HTML file in t