Is there any connectors between - OBIEE RPD & Big Data

Is there any connector between - OBIEE RPD & Big Data? How we will get structured & unstructured data into OBIEE RPD to generate reports?

Not sure what you want to achieve here... however.. what I read is that you would like to have a way to get unstructured data into structured so you can report on it using OBIEE. (Correct?).
Depending on the amount of data and the things you need to do to it before you can structure it you can create a map/reduce function and use Hadoop. There is a connector to push the hadoop results into the Oracle database. Then you could use OBIEE to report on the now structured data in the Oracle database.
As I do not know the details of what you like to achieve,..... this is a solution I would start looking into if I where you. :-)
Regards,
Johan Louwers

Similar Messages

Is there any difference between ways to commit data?

Hello friends at www.oracle.com ,
when you need to commit data at Forms, by using PL/SQL, is there any difference between COMMIT and FORMS_DDL ('COMMIT') instructions?
Thanks for your answer, and best regards,
Franklin Gongalves Jr.

commit is a synonym for commit_form, which means any changes in the form will be posted (firing any pre/post insert/update/delete triggers).
If there are no changes in the form, then you get a message to that effect, and nothing happens at the database end.
forms_ddl('commit') sends a commit statement to the database. Changes made to the form are not posted to the database first.
it's generally used when you've made 'behind the scenes' database changes (eg update/insert/delete statements in the body of a trigger/function/procedure) but no changes to base table data, and it ensures the changes are committed at the database, irrrespective of nasty message about 'no changes to commit'.

Is there any difference between the digital connection cables?

Is there any difference between digital connection cables that connect to the back of a computer? I've seen some with two groups of nine pins and a blade. I've seen some with a solid group of 27 pins. I've seen the blade pin and the four pin. I currently run one that has two groups of nine pins with a blade pin. I use it for DVI and it does ok. I wanted to look into the HDMI cable and see how or if things would be different. I bought a cable that has the 27 pin connector with a blade. It physically connects but there is no signal. I checked the monitor and I set it first to HDMI and then tried AUTO. It made no difference. I powered it all down and restarted it all and there was no difference. Do I need to keep looking for a cable that has the same design connection to the PC but has the HDMI connection on the other end. I may have this info wrong. I just know I have two large connections at the time but the last cable I tried had one large connector and one that looked like an advanced USB design. And then is there really any gain between the two as far as video quality or response?

There are several type of connectors/cables with different effect.
VGA
DVI
HDMI
To understand more, I would say please look it up.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G usb cable? thanks

Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G usb cable? thanks

Yes you have a one year warranty from the date of purchase from Apple. Go to this link and on the bottom right hand side it will ask you to enter your serial number and will tell you if you are still under warranty. http://www.apple.com/support/
If you are you can take it to a Apple store, or request service online here http://depot.info.apple.com/ipod/
If it is out of warranty you can google a third party service provider and get it serviced out of warranty. There are two that I know of that provide free diagnostic service. You only pay for shipping and they will tell you what is wrong and what it will cost to fix. They are ifixipodsfast.com and ipodmods.com but there are others also (I just have no experience with them) Good luck and as was stated it should charge from your usb. and just for grins, look at the docking connector on your ipod and see if there is any obstruction that is obvious.

Is there any link between movement types and documents

hi
is there any link between sales doc and movement types ?
is it the only source dependig on schedule line movement type will determined?
if with out order we are doing delivery how system will determine movement type
Thanks in advance

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Is there any Link between BNK_MONI and DMEE

Hi ,
I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
I am running following sequence of T Codes :
RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
I want to update one of the fields in output file generated by BNK_MONI .
Is there any link between BNK_MODI and DMEE ?
Or shall I have to Debug background job created by F111 like it is done in case of F110 ?
Please suggest..
Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Is there any relation between feilds " reason, code, code group , sub pro

is there any relation between " reason , code , code group , subject profile'
Actually i have make "reason" feild has default value ..
i have to do by RFC .
Cany any body plz reply from where i have to pick this reason feild and set reason feild has default value has " not started "
thanks,
aravind.

Hi,
Subject profiles are used in different areas like
Service
Complaint
Activity reason(Used in all documents like sales,service order)
There is a relationship between Codes, Code groups, code group profiles, Catologs, Subject profiles.
Do not confuse 'Reason' with 'Code' or 'Subject'(Not subject profile), all are same. In different contexts you call them with different names.
1. In IMG while creating codes you use the name "Code".
2. While entering details about activity in any business transaction you call it as a "Reason"
3. While entering the defect of the problem in Service or complaint doc. you use the name "Subject"
In all above cases it is equivalent to name "CODE' which you define in IMG.
Now coming to relationship of above mentioned entities, in any business transaction type customization you can select "business activity" as additional business transaction category. At the customizing header level of this bus. tran. category you are allowed to enter a "Subject profile" which controls your "Reason" field in the business transaction.
In a similar way for service or complaint order you are allowed to enter a "Subject profile" for entering "Subject" in respective transactions.
Each subject profile is assigned to Subject profile category like Service, Complaint, Activity reason etc.,
1. First define catalogs
2. For each catalog define code groups and codes( Code, subject, reason mentioned earler)
3. Create 'Code group profile' for each catalog and assign assign 'code groups' that are relevant for coreesponding catalog to 'code group profile'
4. Now finally create a "Subject profile" which is the combination of "Catalog and code group profile"
I think this would clarify your doubt.
Coming to default value in this reason field, the standard system will not support this. You sholud use some Badi to get this.
Reward points if it helps.
Murali

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

Is there any Similar between Class.forName() and new operator ???

Plz tel me is there any Similar between Class.forName() and new operator ??? i have been asked this ques in interview

You probably should have used the other thread:
http://forum.java.sun.com/thread.jspa?threadID=792678
To add a little confusion to the matter...Class objects are in fact objects. They're objects representing classes. So, in a sense, I guess, you could say they're similar -- in each you get an object. But in practice Class objects and all other objects should be considered semantically different unless you're doing some pretty unusual stuff. Also Class.forName is more of a factory method than a constructor.

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

Is there any incompatibility between Labview 8.5 and Traditional DAQ?

Hi, I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
Thanks.

First, you posted to the wrong board. Measure is an old add-on for Excel.
Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

Is there any difference between Regular SAP Cert / SAP TechEd Cert

Hello All,
I need to appear for the following Certification:
SAP Consultant Certification Technology Consultant SAP NetWeaver04 - SAP Web AS for ORACLE (WAS 620, Oracle 9)
Is there any difference between regular SAP certification and Certification at TechEd (- except certification costs)
Regards,
Ammey Kesarkar

No. It is just the certification exam is offered at SAP Tech Ed event.
Regards,
Jai Shankar

Is there any difference between the 2 different USB cords when syncing???

I know this may be a paranoid question to ask but I just wanted to make sure.
Is there any difference between the newer USB cords with the shorter plug (the end that goes into the iPhone) and the older ones with the bigger, square-shaped plugs that you can pinch on the sides to retract?
Is there a difference in transfer speed, syncing speed, or reliability, or build quality?
Just asking cuz the newer USB cord that came with my iPhone 3GS is getting frayed and so I'm using the older one instead.
Thanks to whoever helps.

No difference except, as you noted, you have to squeeze the older one to remove it. It's important that you do that so you don't damage it or the iPod.

Is there any integration between Payroll and AP or Cash Management?

Hi All
Is there any integration between Payroll and AP or Cash Management?
Regards
Rahman

and that document refers to checkwriter as bridge between Payroll and Cash Management.
Q: But how many legislations have a checkwriter?
A: Only a very few.
So that is why i replied 'not really' in the beginning of this thread.

Is there any connectors between - OBIEE RPD & Big Data

Similar Messages

Maybe you are looking for