Is there any danger in closing your apps completely?

I used to have an android phone and I read were you should just not kill your apps. Is there any danger in closing your apps completely on the iPhone 4s? To do this I hit the home button twice, hold down on one of the apps until it starts bounching and then close them.
Thanks!
Sikorasc

No.
I too came from an Android and the stupid "need" to close apps all the time in fear of battery drain or performance drop.
From what I've read and been told by Apple specialist at Verizon, there's no need.
Its part of the Apple multitasking experience.
The way I read it and had it explained is, the App running freezes in its current state once home button it hit.
You open another App and the previous one is froze in standby. Then you can switch between them and its fast
They call up much quicker. And they don't use battery while frozen.
They don't hurt performance either. I've had every App on my phone open at one point(accidentally) because I was used to Android and I never saw a performance drop.
I also leave them open all day and the battery life is same.
Apple says, if memory get slow, it will look at latest process vs biggest process and decide which to stop if need be.
You can close them if you like, it wont hurt, but its nice to have them open for quick use without the fear of battery drain.
A nice feature coming to Apple.
Heres my battery life
I know some have reported bad usage.....and I believe them. But every one of those Ive read were rectified by either a configuration of push not. etc or just a faulty battery.

Similar Messages

Is there any way to store your app store password?

I'm new to the whole Apple scene, so be kind
As the title states, is there any way to store my password so that I don't have to enter it in every time I download an app from the app store? So far, I've only used free apps and it asks for the password every time...a bit annoying, right?
Thanks in advance!
Jeff

..Tcodes SP01. SP02 etc are used for spool . Any one can use this tcodes
TSP01 is the table.
Any of your objects that you give for print are stored as spools in this Tcode. Sometimes based on the attributes you set spool gets created and then deleted. Or you can retain the spool.
Goto SP01 and give your Uname and you can check the spool id's over there. Click on them to see the content.
SP01 - Spool Control.
You can maintain the spools: delete, print, save local file etc.

I have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly

i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly

An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible. The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone.
Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models.

Is there any way to stop an app from updating? I accidently hit update all, and have an app I don't want updated.

Is there any way to stop an app from updating? I accidently hit "update all" and have an app i don't want updated. Thanks

you can't reverse the process, once you accepted there is no other way, if you sync it to your itunes library in your computer it will automatically update the updated app as well.
What you can try though is delete the app from your iPad and try syncing it to your itunes library but if you set up iCloud it may update the app automatically

I want to connect the ipod directly to the car 's speakers without any amplifiers, is there any danger to burn the ipod?

I want to connect the ipod directly to the car 's speakers without any amplifiers, is there any danger to burn the ipod?

No, but it will not work. The iPod does not have an amplifier in it that is powerful enough to drive the speakers in your car.
So, do you have a stereo in the car, either factory fitted or one you have had fitted after it came out of the factory? If you do, check to see if the car's stereo either has a dedicated input for an iPod or an auxilary (aux input) socket.
Some modern cars (for example, my 2006 model Mazda 3) have stereos that can be fitted with iPod connectors. I paid to have one fitted to my Mazda's factory-fitted stereo. So now, I connect my iPod to the car's stereo via a dock connector and I have limited control of the iPod from the car's steering wheel. Some cars have more sophisticted control than mine does.
Alternatively, if the car's stereo has an Aux input socket, you only need to buy a headphone-to-headphone lead and connect from the iPod's headphone socket to the Aux input.
If you don't have either of those options, another method is to use a transmitter. These small radio transmitters are connected into the headphone socket of the iPod and then transmit the audio (like radio) so that you can tune your car's radio to the same frequency as the transmitter. You control the iPod as you do when using headphones. The sound quality will porbably not be as good as the dedicated dock connector method, but it's reasonable.

Is there any event in windows universal app (wp8.1&win8.1) that fires when screen locked and unlocked with in the app?

Hi All,
Is there any event in windows universal app (wp8.1&win8.1) that fires when screen locked and unlocked with in the app
Right now, I am using this below mentioned event
Window.Current.VisibilityChanged +=
CurrentWindow_VisibilityChanged;, but it fires even when app relaunches.
Please anybody help me to solve this issue.

Thanks for your early reply. but, those are system triggers used in background task. I want an event that fires when screen gets locked. like this...(a networkstatuschangedevent)
NetworkStatusChangedEventHandler
networkStatusCallback =
newNetworkStatusChangedEventHandler(OnNetworkStatusChange);

Hi both myself and my wife have separate iTunes accounts is there any way we can share apps?, Hi both myself and my wife have separate iTunes accounts is there any way we can share apps?

Hi both myself and my wife have separate iTunes accounts is there any way we can share apps?

Your are likely to find running two different AppleIDs on the same device to be more trouble than it is worth. Apps and content cannot be shared between IDs.

The email id on my icloud is not working . i donot have acess to this as well. so i am unable to download apps. i cannot even set up new email id as it asks for previous password. is there any otherway i can download apps to my phones

the email id on my icloud is not working . i donot have acess to this as well. so i am unable to download apps. i cannot even set up new email id as it asks for previous password. is there any otherway i can download apps to my phones

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Is there any way to undelete an App that was deleted by accident, while at the same time keeping all the info that was in the App?

Is there any way to undelete an App that was deleted by accident, without loosing all the information that was in the App?
Any help would be greatly appreciated.
Thanx P.

Only if you have an iPhone backup from the time before you deleted the app. App data and settings are part of the backup, but iTunes replaces the existing backup with a new one when you sync. Only backups used to restore the phone will not be replaced and marked with a time stamp.
If you included the iphone backup folder into your computer backup routine, you could restore the folder and use the iphone backup to restore your phone. But all data will be set back to theat point in time when the backup was taken.
More info here: iPhone and iPod touch: About backups

HT1531 is there any way to open powerpc apps?

is there any way to install powerpc apps?
and im using mac verison 10.7.3 not 10.5 lepard.

Not in Lion. PPC applications are not supported by Lion. You can try upgrading them to versions that are designed to run on Intel Macs. You can look for Intel compatible alternatives. You can partition your hard drive and install Snow Leopard on one partition that you can use to run PPC applications by installing the Rosetta emulator when you install Snow Leopard.
Beyond this it's hard to assist because you did not state what PPC applications you want to run.

Is there any way to locate your iPhone even though it is dead or offline?

Is there any way to locate your iPhone even though it is dead or offline?

Other than by physically looking for it, no.

Is there any danger subjecting a WRE54g to below freezing temperatures?

Is there any danger subjecting a WRE54g to below freezing temperatures? I am using the repeater to relay an AP to a guard shack while working. I have the repeater in my car running on a power inverter about 500 feet away. I live in the northeast and winter temperatures can get below zero.

You can check this link and i think it will help you little bit. Check the specification and it might help you.
Message Edited by dibbler on 12-16-2009 05:47 PM

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Do you mean Office 2008 and 2011 or do you really want Office 2001? I think you mean 2011 since Office 2001 wouldn't make much sense.
The Office uninstaller should be able to identify there are two versions and allow you to delete either one or both.

Is there any danger in opening an unstructured document in structured Framemaker?

I know that it's not a good idea to open a structured FrameMaker file in the unstructured FrameMaker interface, and that there's a warning about this when you try.
What's come up for us however is whether there's any problem with people using the Structured FrameMaker interface to edit unstructured files.
We have a machine set up for people who are not expert or highly skilled with FrameMaker, and since we have both structured and unstructured documents, the question is whether to leave it set as the structured interface, or the unstructured interface. They're just making small content edits in most cases, for anything more involved they ask me.
So:
If it's set to unstructured:
If they open an unstructured document, all is well.
If they try to open a structured document, they will see the warning. I can tell them what to do if they see it. (This might mean telling them to change to structured, or just to give me that file to edit instead.)
If it's set to structured:
If they open a structured document, no problem.
If they open an unstructured document however -- is there any danger if they edit it that way? Will saving from structured FrameMaker change anything about the file?
In the latter case, opening unstructured in structured Frame, there's no warning, it just opens with a blank structure view window, if they even open that window.
I have to imagine that Adobe separated the two interfaces for a reason, but possibly it has more to do with just not needing all of the resources like XML and DITA menus when you're in unstructured.
I realize that the real answer is not to let people unskilled with FrameMaker use it to edit documents, but this is the way things are for the moment. If it's set to unstructured, they'll have to switch over in order to edit structured files, and then be sure to remember to switch back. Leaving it set as structured in some ways seems the best choice, but only if it won't damage unstructured files that way.
Thanks

timezoned wrote:
I know that it's not a good idea to open a structured FrameMaker file in the unstructured FrameMaker interface, and that there's a warning about this when you try.
What's come up for us however is whether there's any problem with people using the Structured FrameMaker interface to edit unstructured files.
We have a machine set up for people who are not expert or highly skilled with FrameMaker, and since we have both structured and unstructured documents, the question is whether to leave it set as the structured interface, or the unstructured interface. They're just making small content edits in most cases, for anything more involved they ask me.
So:
If it's set to unstructured:
If they open an unstructured document, all is well.
If they try to open a structured document, they will see the warning. I can tell them what to do if they see it. (This might mean telling them to change to structured, or just to give me that file to edit instead.)
If it's set to structured:
If they open a structured document, no problem.
If they open an unstructured document however -- is there any danger if they edit it that way? Will saving from structured FrameMaker change anything about the file?
In the latter case, opening unstructured in structured Frame, there's no warning, it just opens with a blank structure view window, if they even open that window.
I have to imagine that Adobe separated the two interfaces for a reason, but possibly it has more to do with just not needing all of the resources like XML and DITA menus when you're in unstructured.
I realize that the real answer is not to let people unskilled with FrameMaker use it to edit documents, but this is the way things are for the moment. If it's set to unstructured, they'll have to switch over in order to edit structured files, and then be sure to remember to switch back. Leaving it set as structured in some ways seems the best choice, but only if it won't damage unstructured files that way.
Thanks
As Matt notes, the extra structured stuff in the interface may be confusing to users familiar with unstructured FM. However, it will also be confusing when unstructured FM users try to find and use the paragraph and character catalogs, and some other unstructured features that are perfectly usable in structured FM, but are not immediately visible in the structured interface.
One way to improve and simplify the FM environment for users who are able to edit text, but shouldn't be manipulating other tools, is to customize the interface. Search Google for terms like "customizing framemaker" without quotes. Recent FM releases feature the ExtendScript ToolKit, which offers new ways to customize FM, in addition to those in the older methods of modifying the maker.ini and configui files. One option if you follow this path would be to create custom Windows icons that call startup scripts which then call FM. Before the script launches FM, it can copy specified configuration and ini files into the user's environment, so that when FM starts up, it's got just what you design it to have. A simple approach here would be customize unstructured FM's interface to have only the minimum set of menu items and other things you specify, and launch unstructured FM. An icon could be named for the user, like SallyJonesFM, or for the task, like FMUnStrEditing.
I'm sure some folks on the forum have taken an approach like this for their users, and can offer some advice from their vast experience.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

HT201272 hi is there any how i can purchased apps from my mobile balance, is that possible??

hi is there any how i can purchased apps from my mobile balance, is that possible??

What do you mean by "mobile balance"?

Is there any danger in closing your apps completely?

Similar Messages

Maybe you are looking for