Is there any deffirence for master data from flat fime bi 7.0 and 3.5?

hi friends,
is there any deffirence for master data from flat fime bi 7.0 and 3.5?
regards
suneel.

you can follow the same 3.x dataflow eventhough u upgrade.
the only diff
3.x - would be emulated DS
7.0 - RSDS
3.x - file path declared in infopack
7.0 - is declared in DS (that would be inherted by infopack)
Infosource - optional - works fine on both the versions
creating a new DS, it has to be RSDS .. no way out

Similar Messages

  • Data Source creation for Master Data from Flat File to BW

    Hi,
    I need to upload Master Data from Flat File. Can anybody tell step by step right from begining of creation of DataSource up to Loading into Master Data InfoObject.
    can any body have Document.
    Regards,
    Chakri.

    Hi,
    This is the procedure.
    1. Create m-data with or without attributes.
    2. Create infosource .
        a) with flexible update
             or
        b) with direct update
    3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
    4. Create the flat-file with same stucture as communication structure.
    5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
    6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
    Hope this helps. If still have prob then let me know.
    Follow this link also.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Assign points if helpful.
    Vinod.

  • Is there any way to recover data from a cleared soft partition?

    Is there any way to recover data from a cleared soft partition? <eom>

    You could try using 'metarecover'. I don't know if that works after a metaclear, but it's the only think that I could think to try.
    I think you could brute-force search for UFS filesystems within the underlying storage, but that's pretty tedious.
    Darren

  • Is there is any setting for export data from database- datasource

    Hi ALL
    i am using crm 2007 system in there , i had activated opportunities OLTP reports , here but i can not able to get the data in reports , then i check the respective data source in RSA3 it showing zero records,
    is there is any procedure to getting data from data base tables to data source.

    you can follow the same 3.x dataflow eventhough u upgrade.
    the only diff
    3.x - would be emulated DS
    7.0 - RSDS
    3.x - file path declared in infopack
    7.0 - is declared in DS (that would be inherted by infopack)
    Infosource - optional - works fine on both the versions
    creating a new DS, it has to be RSDS .. no way out

  • Is there any way to retrieve Data from permanently crashed Palm?

    I have a treo 755p that seemed to die on me. I can't get it past the "Access" opening page when I power on.  The phone gave me a message about memory shortfall after a phone call and that was it.  My service provider -Telus- no longer handles Palm and so they quickly told me that it was toast... but I'm suspicious...  They want to get me into a Blackberry.
    I have discovered that everthing was backed up except for my Versamail and I had some important emails stored there.  Is there some way that this information can be accessed in any way?  Is there something I can try to do?  The person at the store tried to reset the phone but that apparently did not work.
    So... two parts to the the question: Can somebody tell me what steps I can do to save my Treo and if it is dead... is there any way to access the phone's hard drive?

    Hello and thank you for using the Palm Help Forums!
    I am sorry to hear about the problem you are having. Unfortunately, the device does need to be fully booted to access the memory and sync it. If it is not able to boot, there is no supported way of getting your data off of that unit. A hard reset may resolve the boot issue you are having but the data would be lost. However, you can try a hard reset and answer "No" to erasing your data to see if it will fully boot. I will epxlain this process in further detail.
    To hard reset the device you will want to remove the battery. Before placing the battery back in the device, hold down the red (end call) button. While holding down that button reinsert the battery. Continue holding the red button until the loading bar at the bottom completes. You will then be prompted with a message "Erase All Data Yes or No." You will then press DOWN on the 5 way navigator to respond "No" to this prompt. If the device still gets stuck and will not boot then you must answer "Yes" to resolve the issue. NOTE: BY ANSWERING YES WILL ERASE ALL DATA CURRENTLY STORED ON THE DEVICE.
    I hope this helps in resolving the issue you are having. Future advice: Hotsync your device to a computer regularly to keep a back up of your data just incase if these problems occur.

  • Initial Load for Master Data from R/3 to CRM

    Hi Middleware Experts,
        I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
    1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
    2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
    Please suggest whether it can be done or not and which is the better option.
    Regards,
    Rahul

    Hi Rahul,
    Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
    When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
    <b>Allot points if my post helps!!</b>
    Best regards,
    Vikash.

  • Loading hirarchy master data from flat file to BW

    hai,
    i am new to BW Environment, thanks in advance for the Forum.
    while loading hierarchy master data from the flat file to BW, i am getting an error as follow
    WITH AN OPEN SQL SELECT, THE OUT PUT AREA USED TO HOLD THE SELECTED RECORDS MUST BE ATLEAST AS WIDE AS THE DATABASE TABLE FROM WHICH RECORDS ARE BEING READ.
    IN THIS CASE , THE DATABASE TABLE IS 167 BYTES WIDE, BUT THE OUT PUT AREA IS ONLY 141 BYTES WIDE
    pl's any one can help how to solve this problem.
    Thanks in advance to the Forum.
    regards
    Reddy

    Hi,
    This is the procedure.
    1. Create m-data with or without attributes.
    2. Create infosource .
        a) with flexible update
             or
        b) with direct update
    3. Create transfer rules and assign tyhe names of m-data and attribute in "Transfer rules" tab and transfer them to communication structure.
    4. Create the flat-file with same stucture as communication structure.
    5. if chosen direct update then create infopackage and assign the name of flat-file and schedule it.
    6. if chosen flexible update the create update rule with assigning name of the infosource and the schedule it by creating infopackage.
    Hope this helps. If still have prob then let me know.
    Follow this link also.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Assign points if helpful.
    Vinod.

  • Wrong century for the dates from flat file

    I am in the process of uploading the data from flat file ( aka CSV) into oracle via external table .
    All the dates have the year of 20xx. My understanding was 51-99 will be prefixed with 19 ( such as 1951 - 1999) and 00-50
    will be prefixed with 20 ( such as 2004 ... )
    The column below ( startdate ) is of timestamp .
    Is my understanding wrong ?
    SQL> select startdate , to_date(startdate , 'dd/mm/yyyy' ) newdate from tab;
    NEW_DATE STARTDATE
    09/18/2090 18-SEP-90 12.00.00.000000000 AM
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    PL/SQL Release 11.1.0.7.0 - Production
    CORE 11.1.0.7.0 Production
    TNS for 64-bit Windows: Version 11.1.0.7.0 - Production
    NLSRTL Version 11.1.0.7.0 - Production
    SQL> show parameter nls
    NAME TYPE VALUE
    nls_calendar string
    nls_comp string BINARY
    nls_currency string
    nls_date_format string
    nls_date_language string
    nls_dual_currency string
    nls_iso_currency string
    nls_language string AMERICAN
    nls_length_semantics string BYTE
    nls_nchar_conv_excp string FALSE
    nls_numeric_characters string
    nls_sort string
    nls_territory string AMERICA
    nls_time_format string
    nls_time_tz_format string
    nls_timestamp_format string
    nls_timestamp_tz_format string
    SQL>
    SQL>

    Offense . None taken ...
    I literally typed the sql ( as I did not copy & paste SQL / resultsets ) . I did use to_char in my original sql . I don't want to expose the real table . thats why I was giving the made up test case. If you carefully the SQL and the equivalent result sets ... you would have noticed .
    Here is the SQL used ( of course , I have changed the table name ) ...
    select to_char(startdate , 'mm/dd/yyyy') sdate, startdate from t
    SDATE STARTDATE
    09/18/2090 18-SEP-90 12.00.00.000000 AM
    The flatfile had the value of 091890 as the data .

  • Is there any way to export data from a calendar 5 instance to 6.3?

    I've run into yet another issue with my migration from calendar 5 to 6.3.
    It turns out that one of our satellite clinics has a very large amount of data stored on our older server. Right now we're having to put the migration on hold because there are several hundred events on the old server that are repeat events and/or events scheduled relatively far in the future. This issue, along with the possibility of double booking events/appointments while both servers are active, is a serious risk that could have detrimental effects on this site.
    There are a few issues that I'm not certain how to handle in this case. First of all, the old server's database is stored in schema 1, and changes in the LDAP directory structure from cal 5 vs. 6.3 made it impossible to migrate the old database and accounts. The new server is schema 2. So migrating the whole directory, especially at this point, seems rather unlikely.
    Is there any way that I can export data for specific accounts and calendars for the people at this site in a version-independent format and import it to the new server? If nothing else we can schedule somebody to come in on one of the weekends and manually copy the data, but if possible I'd like to avoid devoting somebody to that for the several hours that it would take to copy that by hand. Also, this would not be the preferred method due to the fact that human error could result in our clients being misscheduled, which would obviously be bad for business.
    I'd appreciate any ideas anybody may have on this matter.
    Thanks in advance.
    -Damon

    damo.gets wrote:
    Actually I guess I was missing the obvious method of simply exporting to xml and importing on the new calendar. For some reason I thought that the exports were incompatible between versions as well.Hmm... whilst this may have worked on the face-of-it I do wonder whether everything has indeed been moved across and more importantly translated into the correct form e.g. access controls, uids => uids@domain format.
    Is there anybody that can answer definitively whether or not any data will be lost by this procedure?There are simply too many variables involved in your proposed migration to provide any kind of 100% iron-clad guarantees. I would suggest you perform a thorough test migration of the data and then compare the ics/xml export from the ics5/6 systems to see if any of the data has changed. Also test to see whether access controls are still working (can a user who could previously edit another persons calendar on ics5 now do so with ics6).
    Things to look out for are that meeting attendee information is kept, any 'fancy' characters (i.e. 8-bit characters) and formatting information is kept, the number of tasks/meetings is consistent between the two versions and so forth.
    Regards,
    Shane.

  • Is there any fm for extract flatfile from r/3 to bw

    hi gurus,
    i need to extract the data from r/3 flat file to ods using function module it's better way ffor without interface it extracts the data from r/3 flat file,
    is there any function module plz give reply,
    than x in advance.

    Hi Ravi,
    so if you just want to upload this flat file into BW, you have to create a new source system (type Flatfile) if there isn't already one. Then you need an infosource structured like the file. Assign the source system to the infosource and create an infopackage to load the data. That should work. You only need to make sure, that your BW server has access to the R/3 directory with the file.
    regards
    Siggi
    Message was edited by: Siegfried Szameitat

  • Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

    Hi All,
    I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
    But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
    Please help me as to how to resolve this issue.
    Thanks in advance,
    Shubham

    Hi Shubham,
    Please check the queues in SMQ2 and what status they are showing?.
    Thanks,
    Faisal

  • Error in load master data from flat file to infocube "No SID found for val"

    Hi gurus
    while i m loding data from ffile to infocube. getting error message "No SID found for value 'HOT ' of characteristic 0UNIT" for material name field .
    in flat file one fileld having lower carrecter so i have defined formula for upper case in transfer rule.
    after scheduleing message is "data was requested". but in monitor-> detail-> request, extraction status is green and transfer , processing ststus are red.
    overall status is red.

    It appears your transfer structure and source file are not mapped correctly. Make sure your source file is in the correct format. TRy the "preview" function to make sure.
    Also, is the file and your log on language the same? For instance is the file from a GErman user but you are logged in in English? You will see errors like that when you use ST (Stuck = Pieces) instead of PC (Peices in English)
    To test a bad mapping, hard code the Unit to something to make sure...(to PC for instance).
    Also, the error message you are getting is because of transfer structure, please re-activate it. IF it persists, try to skip the PSA and go straight to the data target.
    Message was edited by: Steve Wilson
    Message was edited by: Steve Wilson

  • Is there any way to restore data from an external drive to another external drive without using the macbook pro you backed up?

    Is that I sold my macbook pro an the person who bought it needs it quickly so I have an external drive but it is not portable so I bought a portable external drive but it may take a while to arrive so I backed up my data with the external drive that I have in my house but I would like to know if I can restore my data to the new external drive without the macbook pro and just with the external drive of my house to the portable external drive.
    Thank you

    No, that's not possible. A computer is required in order to effect such a transfer. Connect both drives to your computer. You can use Disk Utility to clone one drive to the other. Be sure you first partition and format the new drive:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the new external drive. Source means the old external drive.

  • Is there any way to migrate data from my Leopard 10.5.8 mac mini to my new Lion mini?

    Just got the new Mac Mini that has Lion pre-installed.  I want to migrate my data from my previous mac mini that has 10.5.8 installed.  What's the trick to do it?  Migration Assistant on my Lion mini is telling me to update the assistant on my old computer but it's already up to date!

    That may work, if the file permissions will allow it.  And it will work for "simple" applications, but not "complex" ones, that came with their own installers. See Transferring  Applications.   Complex apps must be transferred via Setup Assistant or Migration Assistant, or reinstalled from the original discs or downloads.

  • Are there any apps for internet sharing from my iphone to my laptop?

    ^^
    Title says it all.

    You do not need an app. This is a feature of iphone.
    Just sign up for the plan from AT&T and tether your iphone.
    http://support.apple.com/kb/HT3574

Maybe you are looking for