Is there any documentation availble regarding the architecture of Firefox?

Hi,
I'm trying to create a functional model of the architecture of Firefox, but can not find the right documentation. Is someone aware of documentation like this focussing on Firefox? Something like this: http://www.chromium.org/chromium-os/chromiumos-design-docs/software-architecture
Thanks!

Start here - https://developer.mozilla.org/en-US/Firefox - on the Mozilla Developer Network main page for the Firefox Zone.

Similar Messages

Is there any education available for the use of Firefox for a non techie?

I have used Firefox for several years now but I am not very tech-savvy. Many of the points in your promotions and releases don't mean much to me and I feel I may be missing out on some useful tools or features. Is there any education or manual guidance on Firefox and how to use it. How would you suggest that I address this?

Hi philcoa,
You should check out the [http://www.mozilla.org/en-US/firefox/features/ features page] for a quick rundown of all the Firefox has to offer. If there is anything on the features page that you are interested in learning more about, you should try searching for that feature in the [https://support.mozilla.com/en-US/home Knowledge Base]. They have articles that cover pretty much every aspect of Firefox. Like this [https://support.mozilla.com/en-US/kb/getting-started-firefox Getting Started with Firefox] page.
I'll do some digging to see if there are any other articles that might help you.

Is there any documentation regarding the fuego.fdi.* libraries

Is there any documentation regarding the fuego.fdi.* libraries
thanks

Hey lloyd,
It looks like there is!
Within Studio, click on the 'Documentation' flap on the bottom of the screen.
Then, open the project flap, and navigate to Catalog -> Fuego -> Fdi
Double click on any of the individual components, and its documentation will appear within the documentation flap on the lower portion of the screen.
If you don't see any documentation, check the tabs at the top of the documentation flap - the tabs allow you to switch between the documentation for the current method you're working on, and the component you've selected.
-Noel

Is there any way to do the following? Regarding score, and printing.

Hello,
My name is Kyle, and I just started using GarageBand. I have been a Mac user for quite some time, and I just recently purchased the Jam Packs. I have been a composer for about 5 years, and I am really interested in electronic music and the possibilities that it has. GarageBand seems to be a great program, and considering it is a program that is standard on Macs now makes a lot of wonderful technology available to the general public.
I have started using GarageBand to help me with some of my compositions, buy using the software instruments and improvising, to give me an idea of what some chordal structures sound like, and how I could interwieve some of the parts together. Is there any way to view the full score? I know that you can view the notes in note view, but is there any way to select multiple parts and view the score of the parts? This is something that I don't see, and I think it would be very helpful to view it as a full score, while also having the ability to do a single instrument input.
Also, I was wondering if there was any way to print the notation for each part? Also, this would be helpful from score view. I use Finale 2007 for my notation for compositions, and sometimes Sibelius 4. I would like to transfer some of the stuff that I have played into Finale, so that I can do a little more editing, and incorperate it into a piece. I don't want to have GarageBand open, and read it note for note. I don't think there is any way to export them either, so that Finale or Sibelius could read the notes and rhythms. Am I asking for too much from a program that is essentially free with my system? I just see a lot of potential for the program, and I know most of my friends who are also composition majors are Mac users. I think this could be easily fixed, if these things aren't available already. If anyone knows anything about this, or has any suggestions, please let me know, as this is something I would like to use more as a tool, and I feel has a lot more potential to grow into an even better program.

Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
Finale 2007: $500
Sibelius 4: $500
Jam Packs: $400
Midi Keyboard Interface: $100
PowerBook: $1700
Printer for printing scores and analysis: $150
Logic Pro 7: Oy!
As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them.

Is there any documentation on Database parameters?

Hi
We are trying to plan for future growth and make sure that our current structure is optimal. I am looking for some documentation on testing done by Oracle to get some guidelines. I have looked through a couple of Oracle white papers ('0Building Scalable and Performant..........' and 'Page Generation ..........'). I have also looked at some of the white papers regarding architecture.
My questions
Has Oracle done any testing for the database? Have there been any tests as to SGA, Multithreded vs dedicated, etc.. ?
Is there any documentation?
Thanks

Mukesh,
When we ran our load tests, we found that database settings were simply not the bottleneck, at least for the overhead of generating Portal pages and running a Portal instance. Of course, if you're using the database for other purposes, then you need to tune the database as you would for any other application. The type of tuning you do is totally dependent on your unique configuration and application mix. I suggest you refer to the Oracle8i Designing and Tuning for Performance manual.
Regards,
Jerry
null

Is there any documentation on Peoplesoft CRM 9 HelpDesk SLA's?

Hi,
Is there any documentation available on Peoplesoft CRM 9.0 HelpDesk about Service Level Agreements for internal employees?
We are looking into implementing Service Level Agreements on the Help Desk module for internal clients (employees). I am looking for any sort of documentation which would help me understand the current out of the box functionality of Service Level Agreements relating to how t functions for internal clients. Any assistance would be appreciated
Thanks
Elana

Please verify the below online PeopleBook help for CRM9.
http://download.oracle.com/docs/cd/E12341_01/crm9pbr0_run2/eng/psbooks/index.htm
Thank you!
Best Regards
Soundappan

Is there any Documentation frame work for OAF development

hi
Is there any Documentation frame work for OAF development like AIM Documentation for RICE components ?
Hence , it is very clear that, MD50 and MD70 template is not for the OAF java development.
Is there any need to document the oaf development, hence it is using MVC architecture and all the components of the OAF development is very transparent.
thanks

You can extra sections if needed based on the customizations / extensions / personalizations.
Cheers
AJ

Is there any provision to view the selected record using SYS_REFCURSOR?

hi friends ,
I was using SQL Server . now i am shifting to Oracle . so we are changing the Stored Procedures in SQLServer to Oracle SP's. I have given the structure of procedure given below . If possible , i want to see the output of select statement in the TOAD editor . If any body knows please help me
CREATE OR REPLACE PROCEDURE PS_AON
P_STATUS OUT VARCHAR2,
P_CUR OUT SYS_REFCURSOR
AS
BEGIN
OPEN P_CUR FOR
          select colum1,column2,column3 from Table 1;
EXCEPTION
               WHEN OTHERS THEN
               P_STATUS:=SQLERRM;
END;
This is one of the model of stored procedures i am using . And the editor i am using is TOAD 7.3.0 and oracle 9i. Is there any provision to view the selected records by running this procedure in TOAD editor
thanks & regards

(assuming you have relatively recent version of TOAD).
Write a small block to call the procedure (or use Toad's 'execute procedure' option) as in the example below. Note the ':' in front of 'v_cur_out'. When you run the block, TOAD will prompt you for a value / datatype for 'v_cur_out'. Ignore the value, set the datatype to 'Cursor' and click OK. The resultset (if any) will be displayed in the Data Grid window below.
DECLARE
   v_status VARCHAR2 (32767);
BEGIN
   ps_aon (v_status, :v_cur_out);
   DBMS_OUTPUT.PUT_LINE ('v_status => ' || v_status);
END;
/

Is there any possible to display the text in big font in screen painter

HI all!
i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me reply

HI
CALL METHOD o_dyndoc_id->initialize_document
      EXPORTING
        background_color = cl_dd_area=>col_tree_level1.
    DATA : dl_text(255) TYPE c. "Text
    CALL METHOD o_dyndoc_id->add_text
      EXPORTING
        text         = 'Flight Details'
        sap_style    = cl_dd_area=>heading
        sap_fontsize = cl_dd_area=>large
        sap_color    = cl_dd_area=>list_heading_int.
* Display document
    CALL METHOD o_dyndoc_id->display_document
      EXPORTING
        reuse_control      = 'X'
        parent             = cont
      EXCEPTIONS
        html_display_error = 1.
    IF sy-subrc NE 0.
    ENDIF.
by using these methods you can achieve i hope..
have a good day.
regards
sarves

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

Is there any way to get the files from other computer ?

Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
Namanc

Bro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
    if(getCmd.startsWith("FileName")) {
            String[] splitData=getCmd.split(":");
            this.getFileName=   splitData[1];
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("FileSize")) {
            String[] splitData=getCmd.split(":");
            this.getFileSize=Long.parseLong(splitData[1]);
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeOpen")) {
           //data mode open so receive data
          receiveData();
          outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeClose")) {
          //close client socket
         getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
        //if ok found then do other or show error message
    if(sendCmd("FileName:"+getFileName)) {
        if(sendCmd("FileSize:"+getFileSize)) {
            if(sendCmd("DataModeOpen")) {
               bout.write(getBytes);
            } else {
               showError(3);
        } else {
               showError(2);
   } else {
        showError(1);
}i think it will help u

Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task? It seems that would be very useful, yet I can't find an easily available setting for it. I would prefer to
accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered. I thought setting "CopyPrimaryKeys"
to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table.
I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

IIRW there is FastLoadKeepIdentity specifies
whether to keep an identity in OLEDB destination
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

Is there any documentation for filter routine in Data Transfer Process?

I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0

data: l_dow TYPE I,
      L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
    date = sy-datum
IMPORTING
    day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF.

IS THERE ANY TRICK TO CONNECT THE MACBOOK AIR TO A VGA PROJECTOR? (I HAVE PROPER APPLE CABLE)

Is there any trick to connect the macbook air to a vga projector?
(I have the Apple right cable).
I'm a professor in Brazil and just starting using the macbook air...

Hi LCMONTANARI,
If you are having issues connecting an external display or projector to your MacBook Air, you may find the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Is there any documentation availble regarding the architecture of Firefox?

Similar Messages

Maybe you are looking for