Is there any documentation on the BC Data Centre's?

Hi,
I have been a premium reseller of BC for over two years but I am struggling to find any documentation about the BC Data Centre's. I have not been asked before but I am launching a delegate Registration Microsite for Symantec and as with all larger companies their procurement process requires evidetiary documentation to be supplied.
Specifically they are asking for specification or documentation on:
ISO 27001 certificate and Network Penetration test information.
Any help or guidance to this information would be greatly appreciated.
Cheers
Rob

Hi Sidney,
Thanks for the helpful responses. I have had some progress with my queries and have now recieved PCI compliance documentation that BC sent through after your suggested ticket. Moving forward, I think that the shift to AWS will resolve all certification and compliance issues - I imagine this doesn’t come up too often with a product that is aimed firmly at SME’s.
My issue arose as I work for SME’s who in turn work for Blue Chips. Companies like Symantec, Sony & Canon all have extremely stringent procurement procedures even though they are budget conscious and the inference of documentation falls down the chain to us the technical supplier – the National Account Managers and Product managers just set up the deals and promotions and the legal/financial teams then throttle everyone with paperwork. They have simply been told that any websites which contain staff information must reach a very high standard of security and auditory compliance which is understandable but cannot be answered with ‘well its Adobe… of course they are secure!’.
I will follow up to the community when I have finished my research and have a result!
Thanks
Rob

Similar Messages

JPA and CAF BO - are there any editors of the JPA data (like CAF)?

Hello!
As you know SAP invented some layer above JPA and called it CAF. There is a very convenient way to edit data in CAF.
But now I have to create a complex database scheme, also with CAF doesn't allow us to work with objects. So we can't use someObject.getChildren().
So my question is are there any editors of the JPA data (like it is done in CAF)?

Hi Kirill,
at the beginning of our project at the end of 2009, we did a deep analysis of CAF since our architect vehemently suggested to use this framework.
First about the history and purpose of CAF: Initially, CAF was never meant to be a layer above CAF since CAF was invented in the time before EJB 3.0 and JPA standard where writing persistence with EJB 2.x CMP forced the developer to write pages of boiler plate code. This background was approved by SAP.
With upcoming of JPA, CAF ist mostly useless (except for very simply structured data) and prevents you from writing good software.
It is easy just to write @Entity, @Id and @OneToMany (for complex database schemes) and CAF forces you to use an ugly, imperformant database scheme (e.g. CAF uses mapping tables even for 1:n relationships, a clear antipattern!)
The CRUD-services generated with CAF are a pain, too. Usage of pessimistic locking is not up to date for web applications.
With your complex database schemes, you exceed the limit of CAF.
(We decided not to use CAF and did never regret this.)
Concerning your question: There is an "JPA Details" view in NWDS that might help you. It needs JPA Persistence facet on your project to work. Developed by SAP. For JPA beginners, it is a good cheat sheet for JPA annotations and their attributes.
You do not need more since a JPA POJO is easy to code.
Regards,
Rolf

Is there any documentation regarding the fuego.fdi.* libraries

Is there any documentation regarding the fuego.fdi.* libraries
thanks

Hey lloyd,
It looks like there is!
Within Studio, click on the 'Documentation' flap on the bottom of the screen.
Then, open the project flap, and navigate to Catalog -> Fuego -> Fdi
Double click on any of the individual components, and its documentation will appear within the documentation flap on the lower portion of the screen.
If you don't see any documentation, check the tabs at the top of the documentation flap - the tabs allow you to switch between the documentation for the current method you're working on, and the component you've selected.
-Noel

Is there any documentation for filter routine in Data Transfer Process?

I am trying to create a filter routine in the Data Transfer Process to select different billing types depending on what date the Data Transfer Process is running....
I have searched through SDN and found some examples, but some formal documentation would help.
Is there any documention on filtering in a Data Transfer Process using a routine?
I am in 7.0

data: l_dow TYPE I,
      L_S_RANGE TYPE rssdlrange.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'F2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'G2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'L2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZCR2'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZDR1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZEDI'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZMD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRE1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZRED'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZSMP'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSD'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'ZUSI'.
APPEND L_S_RANGE TO l_t_range.
CALL FUNCTION 'DATE_COMPUTE_DAY'
EXPORTING
    date = sy-datum
IMPORTING
    day = L_DOW.
IF l_Dow EQ 5.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S1'.
APPEND L_S_RANGE TO l_t_range.
l_s_range-iobjnm = '0BILL_TYPE'.
l_S_range-fieldname = 'BILL_TYPE'.
l_S_range-sign = 'I'.
l_S_range-option = 'EQ'.
l_S_range-low = 'S2'.
APPEND L_S_RANGE TO l_t_range.
ENDIF.

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??

I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Is there any way to access my data in case i didnt back up my data on icloud and also erased the data from my iphone?

I accidentally erased all my data from my iphone and plus i also forgot to take the back up of the same, so i want to ask is there any way to get my data back?

There might be an outside chance of getting the data back from your iPhone, if it hasn't been overwritten. There are some programs you can run on your computer to scavenge files from your iPhone, even though they have been deleted. You'll need to search on the Internet to find those programs, and then you'll have to buy one of them. And, it's always a "buyer beware" situation when you do that, so research carefully.
Here's one search to start with ...
https://www.google.com/#q=recover+deleted+iphone+files+no+backup

Is there any way to magage push data on the Q5 phone?

Is there any way to magage push data on the Q5 phone?

POP IMAP EAS
http://kb.hpwebos.com/wps/portal/kb/mobile/common/article/18838_en.html
go to settings, accounts, choose the account in question, tap on advanced on bottom, do you show server address and port 443 below it and using SSL with PUSH on? if no then you might not be using EAS (Exchange Active Sync). which usually syncs most PIM info like calendar and contacts.
if using port 25,110,587, 465, 995 you are most likely using POP/SMTP and usually require a manual sync of contacts and calendar. Some services allow CalDAV and/or CardDAV connections
if using port 143, 993 you are most likely using IMAP and some services require a CalDAV and/or CardDAV connection to sync content other than emails.
Not all version of exchange sync everything with EAS
http://en.wikipedia.org/wiki/Comparison_of_Exchange_ActiveSync_Clients
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Is there any restriction on the length of all Primary keys in a table

Hi all,
Is there any restriction on the length of all Primary keys in a data base table?
i have some 10 fields as primary key in a DB table and length exceeds 120 and getting a warning.
Please let me know will there be any problems in future with respect to the same?
With regards,
Sumanth

Well actually there are constraints like
Total of internal lengths of all primary key columns        1024 Bytes
Number of primary key columns per table                     512
For other information about SAP database please refer to http://sapdb.org/sap_db_features.htm
Thanks & Regards,
Vivek Gaur
Alwayz in high spirits

Is there any documentation for iBooks Author.

Is there any documentation for iBooks Author.

Apple has a FAQ article at: support.apple.com/kb/HT5071
You can also go here for information: www.apple.com/support/mac-apps/ibooksauthor/
Google also has a lot of third party information with a simple search.
And of course you can always to to the iBooks Author forum here on Apple Support Communities. The link for that is here: discussions.apple.com/community/ibooks/ibooks_author

Is there any documentation on Database parameters?

Hi
We are trying to plan for future growth and make sure that our current structure is optimal. I am looking for some documentation on testing done by Oracle to get some guidelines. I have looked through a couple of Oracle white papers ('0Building Scalable and Performant..........' and 'Page Generation ..........'). I have also looked at some of the white papers regarding architecture.
My questions
Has Oracle done any testing for the database? Have there been any tests as to SGA, Multithreded vs dedicated, etc.. ?
Is there any documentation?
Thanks

Mukesh,
When we ran our load tests, we found that database settings were simply not the bottleneck, at least for the overhead of generating Portal pages and running a Portal instance. Of course, if you're using the database for other purposes, then you need to tune the database as you would for any other application. The type of tuning you do is totally dependent on your unique configuration and application mix. I suggest you refer to the Oracle8i Designing and Tuning for Performance manual.
Regards,
Jerry
null

Is there any documentation on Peoplesoft CRM 9 HelpDesk SLA's?

Hi,
Is there any documentation available on Peoplesoft CRM 9.0 HelpDesk about Service Level Agreements for internal employees?
We are looking into implementing Service Level Agreements on the Help Desk module for internal clients (employees). I am looking for any sort of documentation which would help me understand the current out of the box functionality of Service Level Agreements relating to how t functions for internal clients. Any assistance would be appreciated
Thanks
Elana

Please verify the below online PeopleBook help for CRM9.
http://download.oracle.com/docs/cd/E12341_01/crm9pbr0_run2/eng/psbooks/index.htm
Thank you!
Best Regards
Soundappan

Is there any documentation on creating basic paper reports?

Hi - I have just started to try to create a report. We have 9i reports but don't need any of the web stuff. I only need to create reports off of our database, run them on my workstation, and print out hardcopies to give to 1 or 2 managers.
Is there any documentation that would just teach me how to create simple reports without all the web functionality? I was trying to follow along in the Reports Builder 6i, but it seems a lot has changed since 6i and I am having trouble just trying to find the corresponding buttons in 9i.
I need to learn how to create reports, triggers, and especially I want to learn how to rearrange the report output after it has been created. It seems very confusing to me how to do this on Paper Layout or Paper Design screen.
Thanks for any help. I would even go buy a book if there were a good one.

Links to all reports docs
http://otn.oracle.com/documentation/reports_dev.html
Oracle9i Reports Building Reports ( very extensive )
(PDF version ) http://download.oracle.com/otn/other/general/B10310_01.pdf [ 8 MB ]
(HTML version ) http://otn.oracle.com/products/reports/htdocs/getstart/docs/B10310_01/title.htm
Thanks
The Oracle Reports Team

Is there any documentation on how to nest IF or IFThen in Fin Reports

I'm trying to nest now but can't find any documentation on the proper syntax.
Here is my logic. I'm in column D in my grid.
IF C < 0 and B = 0 then -1
ELSEIF C = 0 then 0
ELSEIF B < 0 then ( C / B ) * -1
ELSE C / B
Can you help? I'm stumped and on deadline.

Thanks... Got me on my way: Here's what final solution was
IFTHEN ( ( ( [ A ] + 0 < 0 and [ B ] + 0 < 0 ) and ( [ B ] < [ A ] ) ) , EVAL ( ( ( [ A ] - [ B ] ) + 0 ) * - 1 ), IFTHEN ( ( ( [ A ] + 0 < 0 and [ B ] + 0 < 0 ) and ( [ A ] < [ B ] ) ) , EVAL ( ( ( [ A ] - [ B ] ) + 0 ) * - 1 ), IFTHEN ( ( ( [ A ] + 0 = 0 and [ B ] + 0 > 0 ) or ( [ A ] + 0 > 0 and [ B ] + 0 = 0 ) ) , EVAL ( ( [ B ] - [ A ] ) + 0 ) , EVAL ( ( [ B ] - [ A ] ) + 0 ) ) ) )
Had to put cheasy + 0 in there to force a 0. I couldn't find a way for it to treat #Missing as a zero. Anyways it worked and that's what matters I guess :)
Appreciate the help.

Is there any function to get baseline date

Dear all,
Is there any function to get baseline date according to the payment terms?
Thank you in advance.

have a lokk here:
determine due date
A.

Is there any Documentation frame work for OAF development

hi
Is there any Documentation frame work for OAF development like AIM Documentation for RICE components ?
Hence , it is very clear that, MD50 and MD70 template is not for the OAF java development.
Is there any need to document the oaf development, hence it is using MVC architecture and all the components of the OAF development is very transparent.
thanks

You can extra sections if needed based on the customizations / extensions / personalizations.
Cheers
AJ

Is there any documentation on the BC Data Centre's?

Similar Messages

Maybe you are looking for