Is there any documentation that explains CUCM version nomenclature?

That is what is
the difference between CUCM 6.1.3(b) and CUCM 6.1.3.3000
-1 ?

Hmm.. not that I've seen.
Basically there is the long form and the short form.
7.1(3) = 7.1.3.10000-11
Usually the 7.1(3) maps to the first three . separated digits, and then the initial version would have a number like 10000 followed by a build number or something... 3a would have 20000, 3b 30000.
7.1(3a) = 7.1.3.20000-2
7.1(3b) = 7.1.3.30000-1
Of course, anything after the 7.1.3 bit in these numbers is liable to pretty random (in initial 'a/b' releases and especially on anything in between such as service updates), so you can look up the version numbers in a couple of places:
- When downloading
- In the upgrade matrix : http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp43011
Regards
Aaron

Similar Messages

  • Is there any documentation on creating basic paper reports?

    Hi - I have just started to try to create a report. We have 9i reports but don't need any of the web stuff. I only need to create reports off of our database, run them on my workstation, and print out hardcopies to give to 1 or 2 managers.
    Is there any documentation that would just teach me how to create simple reports without all the web functionality? I was trying to follow along in the Reports Builder 6i, but it seems a lot has changed since 6i and I am having trouble just trying to find the corresponding buttons in 9i.
    I need to learn how to create reports, triggers, and especially I want to learn how to rearrange the report output after it has been created. It seems very confusing to me how to do this on Paper Layout or Paper Design screen.
    Thanks for any help. I would even go buy a book if there were a good one.

    Links to all reports docs
    http://otn.oracle.com/documentation/reports_dev.html
    Oracle9i Reports Building Reports ( very extensive )
    (PDF version ) http://download.oracle.com/otn/other/general/B10310_01.pdf [ 8 MB ]
    (HTML version ) http://otn.oracle.com/products/reports/htdocs/getstart/docs/B10310_01/title.htm
    Thanks
    The Oracle Reports Team

  • I am using itunes version11.1.3.8 and an iphone 4s version 7.0.4. Is there any way that I can create my own ringtones as I had done in the past? Thank you.

    I am using itunes version11.1.3.8 and an iphone 4s version 7.0.4. Is there any way that I can make my own ringtones? I have always done so in the past (Android). I much prefer to hear my songs when someone calls. Thank you.   

    I have tried to follow all the steps correctly. I presently have on itunes 2 entries:
    1. song.m4r with this highlighted on info screen but song location.m4a on summary screen. I have enetered "OK" several times.
    2. song no suffix on info screen but song location .m4r.mp3 on summary screen
      After syncing I then go a contact and edit it. Trying to change ringtone does not give me an option for the ringtone that I created only those that were preloaded. Is there something that I need to do here? The ringtone (at least one of them) does appear in my song  list and I can play it. I don't know how to check for its properties on the iphone.
    I do not have an itunes created entry on the sidebar for ringtones (I did create a playlist myself).

  • Is there any tablet that will allow you to use Adobe XI (the latest version)?

    Is there any tablet that will allow you to use Adobe XI (the latest version)?

    Any tablet based on Windows 8 - that is the ones using the "real" Win 8, not Win RT. Asus Yoga and that....
    Mylenium

  • (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

    (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
    (2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
    Thanks
    Sam

    TidyCup
    What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
    But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
    1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
    To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
    or
    with your mouse cursor draw a rectangle around the clips that you want to select
    2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
    Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
    Are you asking about photos with landscape or portrait orientation?
    The pan and zoom tool does one photo at a time.
    Have you read the Adobe documentation on the Pan and Zoom Tool?
    http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
    Please review and clarify and then we can get into greater details on this.
    Thanks.
    ATR

  • Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
    On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
    My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
    The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
    Can you please:
    1. Explain why this problem occurred. This is so annoying.
    2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
    3. How can I prevent similar problem with he subsequent version?
    Why Apple don't make this update standard as other update?
    Support please. Thank for response in advance

  • Is there any documentation for iBooks Author.

    Is there any documentation for iBooks Author.

    Apple has a FAQ article at: support.apple.com/kb/HT5071
    You can also go here for information: www.apple.com/support/mac-apps/ibooksauthor/
    Google also has a lot of third party information with a simple search.
    And of course you can always to to the iBooks Author forum here on Apple Support Communities. The link for that is here: discussions.apple.com/community/ibooks/ibooks_author

  • Is there any chance that FM reception gets made available on the next iPhone model?

    Hi,
    I did buy an iPhone 3G then upgraded iPhone 4 but always felt that Apple's devices missed a very useful function (and hoped that it would eventually be made available), FM reception! Now I have that cool iPhone and yet I have to have my iPhone to listen to my MP3s and a FM radio to be able to listen to the gym FM broadcasting or listen to my favorite FM station which doesn't broadcast on the internet! And I definitely don't see myself forking away a hundred on an iPod Nano just because of its FM receiver!!!
    Is there a hardware limitation preventing iPhone 4 from receiving FM broadcasting?
    Is there any chance that FM reception gets made available on the next iPhone model?
    Please give your iPhone customer FM reception!!! PLEASE!!!!!!

    We're all just fellow users here and have no idea what Apple might have in mind for future iPhone versions. You can offer your suggestion to Apple via their feedback page, if you wish:
    http://www.apple.com/feedback/iphone.html
    Regards.

  • Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

    Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
    How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in  How the value is chosen. Does it say averages out or simply picks  value at the start of the hour/day or end of the hour/day ??

    I'll try one more time. :)
    Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
    Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
    Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
    min, max, and avg data sample for that entire day.
    And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
    three values).
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • Is there any documentation on Database parameters?

    Hi
    We are trying to plan for future growth and make sure that our current structure is optimal. I am looking for some documentation on testing done by Oracle to get some guidelines. I have looked through a couple of Oracle white papers ('0Building Scalable and Performant..........' and 'Page Generation ..........'). I have also looked at some of the white papers regarding architecture.
    My questions
    Has Oracle done any testing for the database? Have there been any tests as to SGA, Multithreded vs dedicated, etc.. ?
    Is there any documentation?
    Thanks

    Mukesh,
    When we ran our load tests, we found that database settings were simply not the bottleneck, at least for the overhead of generating Portal pages and running a Portal instance. Of course, if you're using the database for other purposes, then you need to tune the database as you would for any other application. The type of tuning you do is totally dependent on your unique configuration and application mix. I suggest you refer to the Oracle8i Designing and Tuning for Performance manual.
    Regards,
    Jerry
    null

  • Is there any way that I could get pages on to my iPhone without buying it again, through the app store? I already bought the computer software.

    Is there any way that I could get pages on to my iPhone without buying it again, through the app store? I already bought the computer software.

    Sorry, no. Different versions for different operating systems.
    Stedman.

  • Where can I find documentation that explains how

    I would appreciate it very much if somebody could tell me
    where can I find a documentation that explains how is it possible to customize the <jbo:ShowHint, similar to the way custom renderers customize <jbo:RenderValue...?
    Thx

    A try at google with sufficient keywords often reveals the answer.
    My estimate is 60-80% of the questions posted here can be solved by constructing a good google search, and take some time to read the hits.
    Of course experience with using linux helps (to choose the rights search keywords)
    To the original poster: there is a very valuable command called 'man', which means 'manual'. if you need information about commands, use the manual, for example: man lsto learn about the 'ls' (list) command. also try man manthe manual page about the manual pages command.

  • Is there any Documentation frame work for OAF development

    hi
    Is there any Documentation frame work for OAF development like AIM Documentation for RICE components ?
    Hence , it is very clear that, MD50 and MD70 template is not for the OAF java development.
    Is there any need to document the oaf development, hence it is using MVC architecture and all the components of the OAF development is very transparent.
    thanks

    You can extra sections if needed based on the customizations / extensions / personalizations.
    Cheers
    AJ

  • Are there any plugins that allow photoshop elements to read DDS files?

    I have multiple DDS files that I have been trying to open in Photoshop Elements 8, and a window comes up and says that it cannot open it because it is the "wrong type of file".  I would like to know if there are any plugins I can download to fix this problem.  It would also be helpful if the plugin could save the file in a DDS format, too.  I had been using a trial of Photoshop CS6 and I had a plugin for that, and I recently found an old disc that had Photoshop Elements 8 on it that I downloaded.  Back to the point, are there any plugins that can do this?

    The 32 bit version of this plugin should work in pse 8 if you on windows:
    http://developer.nvidia.com/nvidia-texture-tools-adobe-photoshop

  • Is there any chance that Tab Grouping feature (like the one in Opera 11) will become native for Firefox? Could be very helpful.

    Is there any chance that Tab Grouping feature (similar to Opera 11) will appear in Firefox? Could be very helpful and convenient.

    Hi ThaPlaya,
    I feel your pain. I am in charge of over 250 PCs and laptops. Flash Player stopped working for me after an update. I have been working on this issue non-stop since the middle of October, 2012. It's time-consuming, and even after applying the latest Flash update, it still doesn't work properly.
    I am beyond frustrated! I have people calling me left and right saying that they can't access content. I have been using this site https://www.mozilla.org/en-US/plugincheck/ to try and do a browser plug-in check while in IE an dFirefox. Even after I update all plug-ins, Flash still works about half the time.
    For instance, the principal of the middle and high school wanted to view an online magazine http://upfront.scholastic.com/issues/12_10_12, about 3 pages load on this site. The rest continue to say LOADING. When I right-click on a page and then left-click on ABOUT ADOBE 11.5.502.110, it seems I am using the most up-to-date version for IE and Firefox.
    Students are trying to access sumdog.com and stmath.com, both run using Flash. STMath is now working a bit better because I allowed some exceptions in our internet content filtering appliance, and in our firewall, sumdog still works half the time.
    If Adobe is going to update their browser plug-ins, they need to test and retest before giving the public access. This situation is causing me a ton of problems!
    Sorry to infiltrate your post...
    Dawn/Flower1964

Maybe you are looking for