Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Similar Messages

  • Is there any (easy) way to use Pages to edit documents imported via iFiles?

    Is there any (easy) way to use Pages to edit documents imported via iFiles?

    That is a question better answered by the developer:
    http://www.ifilesapp.com/
    Peter

  • Is there any easy way to send free invoice via email without my credit info

    Is there any easy way to send free invoice via email without my credit info?

    Depends upon what you mean by 'it failed'. If it's that you are getting a message to contact iTunes Support then no, you will have to contact them (the 48 hours should be the maximum time that it takes for them to reply).

  • Is there any easy way to compare LIKE Addresses from one table, which contains 3rd party data, to another table, our database source

    We have a 3rd party that is supplying us data and we need to compare the addressing between the 3rd party data to our source database addressing. I'd like to make it somewhat flexible meaning I'd like to somehow use the LIKE comparison rather than comparing
    the exact address values. (I have noticed that the 3rd party addressing sometime has a leading <space> at the beginning of the address...why I'd prefer to use LIKE)
    Is there any easy way to do this? Or does this dictate using a CURSOR and processing through the CURSOR of 3rd party data and plugging in the address LIKE as dynamic SQL?
    Please let me know your thoughts on this and I appreciate your review and am hopeful for a reply.

    Yes, it's possible and there are a variety of options but it's may not be for the faint of heart.
    The last time I did it, I ended up taking several passes at the data.
    1st pass was a straight up comparison with no modifications or functions.
    2nd pass was the same but with all special characters removed.
    3rd pass involved splitting the numeric portion of address and comparing just the street numbers and used a double meta-phone function (kind of like a soundex on steroids) to compare the street names.
    Jason Long

  • I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

    I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App  "Numbers" help here?

    Numbers should be able to read Excel files without any problems.    If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

  • I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    Purchase and use Paragon Camp Tune

  • Is there any way to return back vedio that have been deleted before back up and can I cloud back up be enough

    Is there any way to return back vedio that have been deleted before back up and can I cloud back up be enough , it's been deleted after less than 10 minutes by mistake

    Answered here:
    https://discussions.apple.com/thread/6066113?tstart=0
    Did you really think you were gonna get a different answer?

  • Is there a way to rename multiple desktops that have been created?

    Is there a way to rename multiple desktops that have been created?

    No, They'll be Desktop 1, Desktop 2 etc or the name of any full screen apps.

  • Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening?

    Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening? Is there anything I can do to get them back? I'm freaked out by the thought that I am paying for what I thought was a safe place for my photos to be stored and accessed later but now see that there are nearly 500 pictures/videos gone from my photostream folder. Any help would be greatly appreciated. Thank you. - Michael

    Hi newmarket,
    Photo Stream is not a respository for archiving photos. It is a cloud storage device that will store the last month or last 1000 photos taken by any device on the same Apple ID, and then will "share" those photos with all other devices that have Photo Stream turned on,and that are logged onto the same Apple ID.
    iCloud backups will contain all of the photos that were on your camera roll the last time you backed up your device.
    If you have photos outside of the Photo Stream parameters, and they are not all on your current camera roll, then you have no way to retrieve them unless you have imported them to the computer you sync with or have uploaded them to some other cloud service like DropBox.
    Sorry,
    GB

  • Captivate 5 - issue with editing imported PowerPoints that have been resized

    I'm having an issue with editing PowerPoint files that have been imported into Captivate 5 when they have been resized within the Captivate project after the initial import.
    1. I import a PowerPoint presentation into 800x600 dimension.
    2. I resize the project to 900x600 by not locking the aspect ratio and selecting to position to the top right so there is a 100 pixel strip to the left of the slide that we use for navigation buttons and other info.
    3. If I need to make a change to a PowerPoint, I select Edit > Edit with Microsoft PowerPoint > Edit Slide (or Edit Presentation).
    4. The slide opens in PowerPoint and I make the changes and click Save.
    5. When the slide is imported back into Captivate, it is stretched and resized to not fit either 800x600 or 900x600, but something in between. This did not happen in Captivate 4 - the slide would retain the 800x600 dimension slid over to the right with no issues.
    Are there any settings that can be done to ensure the edited slides will import back into the project with the correctly sized dimensions for the current project?

    Hi there
    I agree that it would be nice to see a notification. You know, Captivate offers a special area for notifications that appear when you open it. I'm stymied as to why Adobe doesn't use this area for making such announcements.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected?  To edit in Photoshop I have to export image from Lightroom then import into Photoshop.  I have other programmes such as NIK and if I wish

    My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected?  To edit in Photoshop I have to export image from Lightroom then import into Photoshop.  I have other programmes such as NIK and if I wish to edit in these everything works fine.

    Same here. I've never had trouble with this function before.
    It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
    I'm on a Mac, using OS X Yosemite, 10.10.1  Lightroom is version 5.7  Photoshop is CS5, version 12.0.4
    FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

  • My iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    my iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    Hi cosmoph1,
    If you are having issues with your iPhone not recognizing the installed SIM, you may find the following article helpful:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Regards,
    - Brenden

  • Is there any easy way to migrate painter reports from 4.7 Enterprise to 6.0

    Dear All
    We are being upgraded from 4.7 Enterprise to ECC 6.0 . The issue that we are facing is that company has more than 200 report painter reports ( on special ledger)  and I was wondering if there is any easier way to migrate it to ECC than redoing the whole work. What I mean to say is that, is there any tool/program/tcode that we can use for copying/editing purpose of the reports in ECC 6.0 to be based on flex ledger.
    Thanks

    Hello
    Why do you need to transport the reports?  Upgrade to 6.0 should keep your
    old reports from 4.7.
    In any case transaction GR57 allows you to export them to local file in C:\ and GR58 will import them. I have tested between systems of different releases and
    it worked correctly.
    Regards
    Javier

  • Is there any easier way to set as homepage

    Is there an easy way to ask our users to set my website [http://www.itsmysearch.com] (or any other page on that website) as Homepage.
    I mean, currently i ask users to 'drag the link' on their homepage icon. But isn't there a way so that, they just click on a link, and set the page as thr homepage?

    Yes, take a look at this JS code:
    function bookmark(){
    var title = 'Title of Bookmark';
    var url = 'http://yourdomain.com';
    if (document.all)
    window.external.AddFavorite(url, title);
    else if (window.sidebar)
    window.sidebar.addPanel(title, url, "")
    else if (window.sidebar&&window.sidebar.addPanel)
    window.sidebar.addPanel(title,url,"");
    And call it like:
    <a href="javascript:bookmark()">Bookmark this site</a>
    I'm experimenting with it on my [http://www.myoutfitis.com/ fashion inspiration] site and it seems to be working well.

  • Is there an easy way to edit things under an invisible control

    For clarity, I should mention that I'm trying to do these actions during edit time and not programmatically.
    I have an invisible button floating over some other controls and a decoration. What's the easiest way to interact with the things under the invisible boolean. For example how would I delete or move the decoration or maybe toggle a boolean under the invisible button.  Of course I could click on the invisible button and move it out of the way and then move it back but I'm hoping there's an easier way so I don't have to worry about repositioning the invisible button or messing around with reordering controls.
    Message Edited by InfiniteNothing on 09-29-2009 02:00 PM
    CLD (2014)

    billko wrote:
    Why would you even have the invisible control overlaying the visible ones?  Why not park it outside the visible area of your VI?  Then you don't even have to make it invisible.  Or does this control become visible at some point when running the VI?
    Bill
    I have used large invisible controls to quickly disable large selections of the front panel. It is a quick way to disable lots of controls at one time. Yes, you can disable them individually but it can be easier to disable them using a single control. If the invisible control sits over the area you want to prevent the user from interacting with you simply enable the control access to the items underneath is blocked. Disable the invisible control and everything underneath becomes usable again. I don't use this technique often but it is handy at times.
     When I have used this technique a good way for interacting with the controls underneath are to drop a property node for the control in the VI and hide it. When it is hidden you can get at the items underneath it. When you are done editing unhide the control.
    Message Edited by Mark Yedinak on 09-29-2009 04:16 PM
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Maybe you are looking for