Is there any (easy) way to use Pages to edit documents imported via iFiles?

That is a question better answered by the developer:
http://www.ifilesapp.com/
Peter

Similar Messages

I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

Purchase and use Paragon Camp Tune

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Is there any easy way to compare LIKE Addresses from one table, which contains 3rd party data, to another table, our database source

We have a 3rd party that is supplying us data and we need to compare the addressing between the 3rd party data to our source database addressing. I'd like to make it somewhat flexible meaning I'd like to somehow use the LIKE comparison rather than comparing
the exact address values. (I have noticed that the 3rd party addressing sometime has a leading <space> at the beginning of the address...why I'd prefer to use LIKE)
Is there any easy way to do this? Or does this dictate using a CURSOR and processing through the CURSOR of 3rd party data and plugging in the address LIKE as dynamic SQL?
Please let me know your thoughts on this and I appreciate your review and am hopeful for a reply.

Yes, it's possible and there are a variety of options but it's may not be for the faint of heart.
The last time I did it, I ended up taking several passes at the data.
1st pass was a straight up comparison with no modifications or functions.
2nd pass was the same but with all special characters removed.
3rd pass involved splitting the numeric portion of address and comparing just the street numbers and used a double meta-phone function (kind of like a soundex on steroids) to compare the street names.
Jason Long

Is there any easy way to send free invoice via email without my credit info

Is there any easy way to send free invoice via email without my credit info?

Depends upon what you mean by 'it failed'. If it's that you are getting a message to contact iTunes Support then no, you will have to contact them (the 48 hours should be the maximum time that it takes for them to reply).

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..

I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?

Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx

Is there any easier way to set as homepage

Is there an easy way to ask our users to set my website [http://www.itsmysearch.com] (or any other page on that website) as Homepage.
I mean, currently i ask users to 'drag the link' on their homepage icon. But isn't there a way so that, they just click on a link, and set the page as thr homepage?

Yes, take a look at this JS code:
function bookmark(){
var title = 'Title of Bookmark';
var url = 'http://yourdomain.com';
if (document.all)
window.external.AddFavorite(url, title);
else if (window.sidebar)
window.sidebar.addPanel(title, url, "")
else if (window.sidebar&&window.sidebar.addPanel)
window.sidebar.addPanel(title,url,"");
And call it like:
<a href="javascript:bookmark()">Bookmark this site</a>
I'm experimenting with it on my [http://www.myoutfitis.com/ fashion inspiration] site and it seems to be working well.

Is there any easy way to migrate painter reports from 4.7 Enterprise to 6.0

Dear All
We are being upgraded from 4.7 Enterprise to ECC 6.0 . The issue that we are facing is that company has more than 200 report painter reports ( on special ledger) and I was wondering if there is any easier way to migrate it to ECC than redoing the whole work. What I mean to say is that, is there any tool/program/tcode that we can use for copying/editing purpose of the reports in ECC 6.0 to be based on flex ledger.
Thanks

Hello
Why do you need to transport the reports? Upgrade to 6.0 should keep your
old reports from 4.7.
In any case transaction GR57 allows you to export them to local file in C:\ and GR58 will import them. I have tested between systems of different releases and
it worked correctly.
Regards
Javier

Is there an easy way to use MOVE when importing from card reader?

In Lightroom 1, I would hit File -> Import From Disk which would allow me to move photos from my card reader to the hard drive.
In Lightroom 3, the only option is the normal import dialog and in order to get the "Move" option I have to select "other source" and then scroll down the list to select the card reader in order to get the "Move" option. It's a pain to do it every time. (not to mention my wife will never do it and just use "copy").
So my question is, "Is there a way to get the Move option to be available by default on my card reader?"
It's been my workflow since 2004 to have the images deleted directly after I copy them off the memory card using Adobe software (Photoshop Album 2.0, Photoshop Elements 4, Lightroom 1.0). I'm really hoping there is an easy way to accomplish this in Lightroom 3. Otherwise I will be pretty disappointed.

function(){return A.apply(null,[this].concat($A(arguments)))}
brianbjork wrote:
The reason I like the move command so much is that I know when photos are on my memory cards that the are not on my computer.
LR defaults to not importing suspected duplicates. so if there are still files on the card, they will be grayed out. That's how you can know.
function(){return A.apply(null,[this].concat($A(arguments)))}
brianbjork wrote:
What do you all use in your work flow to delete the pictures left on your memory cards after they are copied?
I have a shell file that removes the files from the card and ejects the disk. I keep it in my dock for easy access.
Others will tell yiou, though, to format in camera. Which is a good idea! I just like to keep my cards empty and ready.

Is there any easy way of exporting a high-res still from FC Studio into Photoshop?, is there any easy way of exporting a high-res still from FC Studio into Photoshop?

Is there any way to do this other than using Grab, which is too low-res? Thanks!

Any still you export from FCP will never be better quality than a video frame itself, which in the case of HD would be an image 1920 px X 1080 px @ 72 dpi.
To export a frame from FCP, park the playhead on the frame you want to export.
Go to the menu File > Export > Using QuickTime Conversion . . . and when the pane opens, at the bottom set the format to Still Image and the press the Options button to set the format you want the still image to be.
Once you have done that, navigate to where you want to store the image and press Save.
MtD

Is there any possible way to use my EOS Rebel XT for EOS Utility?

Okay, so i want to use EOS Utility on my Digital Rebel XT camera. In case you are wondering EOS Utility is used to take a picture with the camera by just clicking a button on the computer. Its used to make it so that any pictures i take arent shaky. Anyway, there is no link for the camera and when i go to the cameras homepage, and go to softwares, There is no download link for EOS Utility for my camera. Is there any way I can still use it on my Digital Rebel XT Camera? Let me know thanks

FantasticMrFox wrote:
Okay, so i want to use EOS Utility on my Digital Rebel XT camera. In case you are wondering EOS Utility is used to take a picture with the camera by just clicking a button on the computer. Its used to make it so that any pictures i take arent shaky. Anyway, there is no link for the camera and when i go to the cameras homepage, and go to softwares, There is no download link for EOS Utility for my camera. Is there any way I can still use it on my Digital Rebel XT Camera? Let me know thanks Other responses have gone off to explain some other solutions before answering your question. The simple answer is "NO". You cannot use your camera tethered to a computer, controlling it via EOS Utilities software (or Lightroom, for that matter). In order to do that, the camera must have the Live View feature. Your XT (aka 350D, from 2005) doesn't have Live View. There was a version of LV on the EOS 20Da (2005), a more complete implementation of it on the 40D (2007), and among the Rebel-series models the XSi and XS were the first to get LV (aka 450D & 1000D, both introduced in 2008). Other responses are on some right tracks, though. If your primary purpose is to help prevent camera shake, there are several other things you can do, which you may or may not be aware of... - Set a faster shutter speed. Of course, to do so may require a larger lens aperture and/or a higher ISO. - Get and use a lens with IS (Image Stabilization).- Use flash, it freezes both subject movement and camera shake, approx. like 1/720 shutter speed would, with most flashes.- Use a tripod along with:- - a remote release (RS-60E3 wired or RC-6 wireless)- - or just use the camera's self-timer delay - - and/or use mirror lockup (Custom Function 7) Tripod quality has a great deal of effect. Some are so flimsy as to be hardly worth using. For example, the most stable tripods do not use a center column or, if it has one, the tripod is tall enough to be used without raising the center column much or at all. Materials make a differentce, too... for example carbon fiber is much better absorbing fine vibration than metal. There are a number of other factors that go into making a tripod stable. Do some additional research, if interested. Note: RC-6 wireless release uses infra red and the sensor for it is on the front of the camera. This is certainly useful for self portraits, but may be problematic using this remote for other types of photos. In addition to the Canon RS-60E3 wired remote release, there are other brand remote switches including some that have additional features such as delay timers, interval timers (time lapse), etc. AFAIK, Canon does not make a timer/controller with E3 connectivity (like the TC-80N3, which will not connect with your camera) Note: The XT's self-timer delay is 10 seconds only. However, when used in conjunction with the mirror lockup feature, it's automatically shortened to a 2 second delay. Note: While IS lenses can make possible handholding lenses at shutter speeds 2, 3 or somtimes even 4 stops slower than you'd normally be able to use... the effectiveness of IS varies a bit from lens to lens and good handholding technique are still needed to get the best out of it. Some IS lenses require IS to be manually turned off when locked down on a tripod. The IS in those lenses can go into sort of a feedback loop where it's actually causing, rather than preventing movement. Don't worry too much about it, though... if it happens you'll see it in the viewfinder and then can turn off the IS. (No harm done to either the camera or the lens.) Hope this helps! ***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & EXPOSUREMANAGER

Is there an easy way to use the VMware Studios Open Source download?

I noticed there was a relatively current open source download package for VMware Studio, so I downloaded it, hoping there were instructions on applying the new software to the appliance. The download was a tar.gz file, which appears to include source code for those OSS packages.
So, I am concluding that my hope that this was an update to VMware Studio was unfounded.
Is there any news, at all, about plans to update VMware Studio? It is obvious that a VMware-internal tool exists as they use it to create their own appliances which appear to have fixed some issues, such as IE10 access.
Thanks Dan

You do not need to invoke Finder to do this. Create a new empty Automator workflow and use the "Run Shell Script" option. Paste in the following....
mv ~/Downloads/* ~/.Trash
You can then save the workflow as an application, attach it as a Finder action or add it to the scripts menu, whichever you like better.
If you would like to bypass the Trash and just completely delete the Downloads folder contents immediately, then paste in this command:
rm -rf ~/Downloads/*

Is there any easy way to get my account able to purchase with iTunes. I get an error message and apple takes 2 days to respond

I have a credit on iTunes and tried to puchave an app on a game but it failed. It takes Apple 2 days to respond and clear the error. Is there any way to do it without going through Apple/iTunes support?

Depends upon what you mean by 'it failed'. If it's that you are getting a message to contact iTunes Support then no, you will have to contact them (the 48 hours should be the maximum time that it takes for them to reply).

Is there any _sane_ way to use BDB concurrently?

I have what I think is a straightforward application. I have a single writer which modifies a database, and a number of readers which are CGI programs. The processes are unrelated and not managed by any particular parent process.
I use CDB, because it sounds like what I want. But I often find that the whole environment is hung with locks being held by processes which have long since exited. I must recover the environment to proceed.
What's really making me pull my hair out is that I can't find any combination of flags to db_env_open() which provides a satisfactory solution. REGISTER and RECOVER can't be used with CDB, so that's right out. But what's maddening is I can't find any way to use LOCK with REGISTER and RECOVER, either. I always get EINVAL returned.
I think what I want is DB_INIT_LOCK | DB_INIT_MPOOL | DB_REGISTER | DB_RECOVER but that doesn't seem to work :-(
If I do it without DB_RECOVER, I always get DB_RUNRECOVERY, even with a virgin database. No matter how many times I run db4.4_recover, it still returns DB_RUNRECOVERY.
What's a programmer supposed to do?

Some test programs:
my $e = new BerkeleyDB::Env
-Home => '/tmp/jwb/'
, -Flags => DB_CREATE | DB_INIT_MPOOL | DB_INIT_LOCK | DB_REGISTER
or die "BDB::Env hoohaw: $!, $BerkeleyDB::Error";
BDB::Env hoohaw: , DB_RUNRECOVERY: Fatal error, run database recovery at ./test.pl line 6.
my $e = new BerkeleyDB::Env
-Home => '/tmp/jwb/'
, -Flags => DB_CREATE | DB_INIT_MPOOL | DB_INIT_LOCK | DB_REGISTER | DB_RECOVER
or die "BDB::Env hoohaw: $!, $BerkeleyDB::Error";
BDB::Env hoohaw: , Invalid argument at ./test.pl line 6.
Sleepycat Software: Berkeley DB 4.4.20: (February 24, 2006)

Is there any easy way to upgrade from Logic Express?

I bought it last year because I couldn't afford the full version - then the full version was dropped to the same price and LE was discontinued. I'd love the security of having it attached to my Apple ID, and to upgrade now, but paying the same price again seems a bit much. Is there any way to upgrade?

You are not alone in your predicament since Apple broke up Logic Studio and discontinued LE.
If you want to make your next purchase via the App Store (which would be wise for future upgrades) I think you basically have two options:
1) Even though it would seem like you're buying Logic again for the same price that you paid for LE, you would be getting a lot more in the way of instruments, plug-ins, and loops. Sculpture, Space Designer, and all 6 Jam Packs for starters. Not to mention that you would then be set up for updates and upgrades. You may find this helpful in determining what you would be immediately gaining by buying Logic Pro 9:
http://support.apple.com/kb/HT4229
Even though the document shows Logic Studio, if you just eliminate Compressor, Mainstage, Soundtrack Pro, and Waveburner you can still clearly see what you'll be getting. If all this makes you drool you can get LP9 now or . . .
2) You could wait a bit longer and buy Logic Pro X, whenever that is released.

Is there any (easy) way to use Pages to edit documents imported via iFiles?

Similar Messages

Maybe you are looking for