Is there any example for a software transceiver in labview / labview modulation toolkit ?

hi everyone
i am sure you have heard of this a lot ..... but i am new (like 20 minutes old) to labview. i am quite fimiliar with matlab and other programming languages. i am doing a project based on software defined radio. for that i understood an example demo from matlab where a fully functional software transceiver has been built as an example.
now i myself have to do that in labview for the sake of comparison and better real time compatibility with USRPs. i am just getting started and was hopping if there is a similar example in labview or someone else's project. i have installed the modulation toolkit and have gone through its various blocks. i understand that i can build a tranmitter and receiver from scratch but that would take a lot of time and testing. so can anyone help me out in any way.....?
regards
khurram

Hi khurram,
did you look for examples with the ExampleFinder?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

  • Are there any fee for developing software for USB non NI harware?

    We develop applications in LabView for pieces of hardware witch communicate via USB. Are there any fee for developing software for USB non NI harware?

    If you really mean distributing software that you developed, then you and a lawyer might want to review the LabVIEW software license - especially the section on distribution requirements (in my 6.1 version it's section 12). You should also contact NI directly and ask them. This forum is primarily made up of LabVIEW end-users and any legal advice you get here is worth exactly what it costs, in other words, nothing.

  • Is there any Example for N9010A EXA Signal Analyzer

    Hi All,
    Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.

    AnkitG wrote:
    Hi All,
    Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.
    That is an Agilent instrument. Shouldn't be looking for examples on THEIR website?????

  • Is there any examples for VB as the "Cont Acq-Int Clk" for ANSI C?

    I wanna acquire  continuous datas using the USB-6008 in VB , but I can't find how to use "EveryNCallback" in VB!
     there is any way to acquire  datas continuing for real time computing in VB?
    Thinks!

    The device can return a set of samples after a amount of sampling(at least 1000 times, that's enough), namely at a longer time.
    Maybe there is RAM in the device which I didn't find on the user guide & specifications.
    Well.Now I have known the bottleneck is the slow reaction of PC.\(^o^)/
    The examples of VB still doesn't work. its parameters settings show in the picture.
    If I set the Sample Rate above 300Hz it show that msgbox after seconds ,if below 300Hz, it can work longer, .
    And if I set like this:
    it can work well,even the Sample Rate up to 10kHz.
    Wait for anyone who can settle this.
    Thanks for your patient help,NIhuyu!
    Yutong Sun
    帖子被gamesun在 10-20-2009 04:51 AM
    时编辑过了
    帖子被gamesun在 10-20-2009 04:51 AM
    时编辑过了

  • Are there any examples for programmatically creating OBR 11g rules?

    I am looking for some examples about how to use the API to create rules from Java code as the SDK documentation is very terse. Are there examples out there for creating rules?

    m_userName wrote:
    When you create items in IB, they always appear at a default size (table view cells and nav bars have a height of 44, etc.). Is there anywhere to access these constants in code, for when you are creating elements programmatically?
    Not that I know of.
    When I want the default dimensions for IB Library objects, I generally drag the objects of interest out of the Library, and read the dimensions manually in the Size Inspector. In fact, when I want to create a view programmatically, I often lay it out in IB, then use the Size inspector to get the frame of each subview.
    \- Ray

  • Are there any examples for using a CAN card via XNET on a real time system?

    I am programming a real time application and I have a PXI 8512 card.  My first order of business is to get 5-byte messages from transducers that are broadcasting at 10 Hz on known message IDs.  There are no CAN/XNET samples in my "realtime" CVI sample folder.  I have found some in the nixnet folder but they are Windows based so I have to hack a lot of stuff out of them.
    Thank you.
    Michael Chadwell
    Department of Engine and Vehicle R&D
    Southwest Research Institute

    In other words, I just need to do something very similar to this with no user interface:
    NOTE: See attachment
    Michael Chadwell
    Department of Engine and Vehicle R&D
    Southwest Research Institute
    Attachments:
    CAN Bus Monitor.jpg ‏83 KB

  • Is there any  example snippet for XPath using namespace

    Hi,
    I have used XpathApi class to get the XML node matching my xpath that does not deal with namespaces and it works for me. However, it does not seem to work well when I construct the xpath with namespaces (probably I may be doing something wrong example: //ns:node1/@ns:attr1).
    Can anyone give pointers or some example snippet or some links to handle Xpath with namespaces.
    Also if there is any better approach (Classes or framework) for handing XPath with namespaces then please let me know.
    Thanks,
    -vc

    AnkitG wrote:
    Hi All,
    Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.
    That is an Agilent instrument. Shouldn't be looking for examples on THEIR website?????

  • Is there any bapi for standard deviation

    is there any bapi for standard deviation

    You can use the function module
    1. 'QRKT_STD_DEVIATION_SHEWHART'-Algorithms for Shewhart chart for s with internal dispersion and mean line
    2.'QRKT_STD_DEVIATION_SHEWHART_2'- Algorithms for Shewhart chart for s with overall dispersion and mean line.
    You could also calculate it yourself of course - standard deviation is the square root of the sum of the square of the differences between the mean and each value divided by the number of values you have less one.
    Reward points..

  • Are there any costs for an adobe reader software distribution license ?

    Are there any costs for an adobe reader software distribution license ?

    No (except for the costs of having your legal team check the license). You do need to read the license carefully, you are making specific commitments and there are specific restrictions.

  • Is there any voice recognition security software for mac

    is there any voice recognition security software for mac

    The problem is that there are probably few dry cleaners running Macs. It would be a big commitment for a developer to enter that market. As a potential user, I'm sure you would like it. From a developer standpoint, I would need 50 such dry cleaners ready to buy at $1000 each just to even consider it. I have some time to develop this year. Should I go after 200 million potential customers, a tiny fraction of whom might spend $5-10 apiece, or those 50 dry cleaners. I know that all of those 200 million people are running the correct operating system for my software. How many dry cleaners have Macs and $1000 to spare? I could go cheaper but then I would need more dry cleaners. Why wouldn't they just use some cloud based service instead?

  • All of suden I can't open email in my mail box...When I get new mail , I click to open that email and mail software quit...is there any solutions for this

    I having problem with emails on my I mac...A few days ago I got email and when I tried to opet to read it mail quit...And from then it is happening all the times...i can't open email in mail ,, anymore...Is there any solutions for this

    See:
    *https://support.mozilla.org/kb/Changing+the+e-mail+program+used+by+Firefox
    You can look at the network.protocol-handler.external.mailto prefs on the about:config page.
    *http://kb.mozillazine.org/about:config
    If network.protocol-handler.external.mailto prefs are user set (bold) then right-click and Reset them to the default value.<br />
    You can also try to change the network.protocol-handler.warn-external.mailto pref to true.

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • Is there any way for me to get my music off of my iPod?  I had to get a new computer and no longer have my files...but most are cds

    Is there any way for me to get my music off of my iPod? I had to get a new computer and no longer have my files, most of it is cds...

    Your iPod can only be synced with one computer at a time.  If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
    Before doing anything else,  authorize the new computer with your iTunes Account.  In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
    Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
    iOS: How to back up
    Now onto synced content such as music, videos, photos, etc.  For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases.  For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier.  Here is more on backing up and restoring your iPod.
    iTunes: Backing up, updating, and restoring iOS software
    If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud.  See this article for information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • HT1338 I have MacBook with OS 10.5.8. Is there any way for me to install and run keynote on this machine? Do I need to upgrade OS and how? Thanks

    I have MacBook with OS 10.5.8
    Is there any way for me to install and run Keynote on this machine? Thanks

    Welcome to the Apple Support Communities
    Keynote '09 is compatible with your computer, but you won't get the latest Keynote version running that version. As you have an Early 2008 MacBook, first I recommend you to update to Mac OS X Snow Leopard to get newer versions of all applications but without losing any applications > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Make a backup before upgrading.
    The DVD contains Mac OS X 10.6.3, so after upgrading, open  > Software Update to update to 10.6.8. Then, you will get access to the App Store.
    However, the Keynote version available in the App Store is only compatible with OS X 10.7.5 or newer, so now you have two options:
    1. Upgrade to OS X Lion and purchase Keynote from the App Store.
    2. Keep Mac OS X Leopard or Snow Leopard, and buy Keynote on a DVD in eBay or Amazon. Note that you won't be running the most recent Keynote version, but it doesn't mind (the latest version only adds iCloud support)

  • Any example for ENQUEUE_ARRAY for JMS compatible messages?

    Is there any examples of using ENQUEUE_ARRAY with messages that are compatible with JMS? either a VARRAY or NESTED TABLE of JMS content?
    I have an after insert trigger that propagates to JMS and in the for each row loop I'd much rather enqueue as a batch than for each individual message.
    It's hard enough getting JMS compatible content working where you are enqueuing just a single message but just what's involved to get this working with batches of JMS compatible messages?

    Hi prajithparan,
    Thanks for the response. I already looked at the link and a few other links in this forum that are related to array inserts/updates. However, I could not find answers to my specific questions. I am specifically concerned with the setup of parameters to the API calls (OCIBindByName and OCIBindArrayOfStruct) that fully reflects the two-dimensional nature of the array of structs that I am trying to insert.
    Moreover, I need to set the data type of the columns to be inserted as SQLT_STR. I think this data type requires the programmer to supply the length of the null terminated C strings as well. If we are inserting just one column, we can provide the length of each of the strings to be inserted into a VARCHAR2 column as part of a OCIBind call, for each of those columns.
    Since in an array insert, we are supplying multiple rows at the same time, how do we supply the lengths of strings to be inserted ? Should it be some form of two-dimensional array ?
    I could not get clear answers to these questions from either the Oracle documentation or the links on this forum. May be the answers are there and I am just missing them ?

Maybe you are looking for