Is there any Example for N9010A EXA Signal Analyzer

Hi All,
Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.

AnkitG wrote:
Hi All,
Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.
That is an Agilent instrument. Shouldn't be looking for examples on THEIR website?????

Similar Messages

Is there any example for a software transceiver in labview / labview modulation toolkit ?

hi everyone
i am sure you have heard of this a lot ..... but i am new (like 20 minutes old) to labview. i am quite fimiliar with matlab and other programming languages. i am doing a project based on software defined radio. for that i understood an example demo from matlab where a fully functional software transceiver has been built as an example.
now i myself have to do that in labview for the sake of comparison and better real time compatibility with USRPs. i am just getting started and was hopping if there is a similar example in labview or someone else's project. i have installed the modulation toolkit and have gone through its various blocks. i understand that i can build a tranmitter and receiver from scratch but that would take a lot of time and testing. so can anyone help me out in any way.....?
regards
khurram

Hi khurram,
did you look for examples with the ExampleFinder?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is there any examples for VB as the "Cont Acq-Int Clk" for ANSI C?

I wanna acquire continuous datas using the USB-6008 in VB , but I can't find how to use "EveryNCallback" in VB!
there is any way to acquire datas continuing for real time computing in VB?
Thinks!

The device can return a set of samples after a amount of sampling(at least 1000 times, that's enough), namely at a longer time.
Maybe there is RAM in the device which I didn't find on the user guide & specifications.
Well.Now I have known the bottleneck is the slow reaction of PC.\(^o^)/
The examples of VB still doesn't work. its parameters settings show in the picture.
If I set the Sample Rate above 300Hz it show that msgbox after seconds ,if below 300Hz, it can work longer, .
And if I set like this:
it can work well,even the Sample Rate up to 10kHz.
Wait for anyone who can settle this.
Thanks for your patient help,NIhuyu!
Yutong Sun
帖子被gamesun在 10-20-2009 04:51 AM
时编辑过了
帖子被gamesun在 10-20-2009 04:51 AM
时编辑过了

Are there any examples for programmatically creating OBR 11g rules?

I am looking for some examples about how to use the API to create rules from Java code as the SDK documentation is very terse. Are there examples out there for creating rules?

m_userName wrote:
When you create items in IB, they always appear at a default size (table view cells and nav bars have a height of 44, etc.). Is there anywhere to access these constants in code, for when you are creating elements programmatically?
Not that I know of.
When I want the default dimensions for IB Library objects, I generally drag the objects of interest out of the Library, and read the dimensions manually in the Size Inspector. In fact, when I want to create a view programmatically, I often lay it out in IB, then use the Size inspector to get the frame of each subview.
\- Ray

Are there any examples for using a CAN card via XNET on a real time system?

I am programming a real time application and I have a PXI 8512 card. My first order of business is to get 5-byte messages from transducers that are broadcasting at 10 Hz on known message IDs. There are no CAN/XNET samples in my "realtime" CVI sample folder. I have found some in the nixnet folder but they are Windows based so I have to hack a lot of stuff out of them.
Thank you.
Michael Chadwell
Department of Engine and Vehicle R&D
Southwest Research Institute

In other words, I just need to do something very similar to this with no user interface:
NOTE: See attachment
Michael Chadwell
Department of Engine and Vehicle R&D
Southwest Research Institute
Attachments:
CAN Bus Monitor.jpg ‏83 KB

Is there any example snippet for XPath using namespace

Hi,
I have used XpathApi class to get the XML node matching my xpath that does not deal with namespaces and it works for me. However, it does not seem to work well when I construct the xpath with namespaces (probably I may be doing something wrong example: //ns:node1/@ns:attr1).
Can anyone give pointers or some example snippet or some links to handle Xpath with namespaces.
Also if there is any better approach (Classes or framework) for handing XPath with namespaces then please let me know.
Thanks,
-vc

AnkitG wrote:
Hi All,
Is there any example for N9010A EXA signal analyzer , I tried to use example of MXA got from the driver page but couldnt get to work. I need to capture the RF data form the analyzer. Please let me know if there any example or way to do it.
That is an Agilent instrument. Shouldn't be looking for examples on THEIR website?????

Is there any tutorial for using ARM cortex-A processors of Zynq for digital signal processing ?

Hello, everyone.
Is there any tutorial for using ARM cortex-A processors(such as A9 and A53) of Zynq to deal with digital signal processing problems?
Please tell me , thanks.

Hi
Check below links
http://www.xilinx.com/training/zynq/software-acceleration-for-dsp-functions-with-zynq.htm
https://www.youtube.com/watch?v=ErEG7ZREcJQ
http://www.xilinx.com/support/documentation/application_notes/xapp1170-zynq-hls.pdf
http://www.xilinx.com/support/documentation/application_notes/xapp890-zynq-sobel-vivado-hls.pdf
http://www.xilinx.com/support/documentation/application_notes/xapp1167.pdf

Any example for ENQUEUE_ARRAY for JMS compatible messages?

Is there any examples of using ENQUEUE_ARRAY with messages that are compatible with JMS? either a VARRAY or NESTED TABLE of JMS content?
I have an after insert trigger that propagates to JMS and in the for each row loop I'd much rather enqueue as a batch than for each individual message.
It's hard enough getting JMS compatible content working where you are enqueuing just a single message but just what's involved to get this working with batches of JMS compatible messages?

Hi prajithparan,
Thanks for the response. I already looked at the link and a few other links in this forum that are related to array inserts/updates. However, I could not find answers to my specific questions. I am specifically concerned with the setup of parameters to the API calls (OCIBindByName and OCIBindArrayOfStruct) that fully reflects the two-dimensional nature of the array of structs that I am trying to insert.
Moreover, I need to set the data type of the columns to be inserted as SQLT_STR. I think this data type requires the programmer to supply the length of the null terminated C strings as well. If we are inserting just one column, we can provide the length of each of the strings to be inserted into a VARCHAR2 column as part of a OCIBind call, for each of those columns.
Since in an array insert, we are supplying multiple rows at the same time, how do we supply the lengths of strings to be inserted ? Should it be some form of two-dimensional array ?
I could not get clear answers to these questions from either the Oracle documentation or the links on this forum. May be the answers are there and I am just missing them ?

Is there any way to boost a signal.

The television signal to each unit gets lost every hour for about 5 minutes, and the tech can't come back for 5 days according to the 800-Comcast. Is there any way to boost the signal in the mean time?

PamBarksdale wrote:
The television signal to each unit gets lost every hour for about 5 minutes, and the tech can't come back for 5 days according to the 800-Comcast. Is there any way to boost the signal in the mean time? Yes, but if you select the wrong equipment, you could be adding to your issues or your neighbors.... it is best to let the onsite Tech make the determination of what equpment you need and he/she has available to install.

JAAS - any example for: Security.setProperty ?

Hi there,
I've just started to play with JAAS. I wonder if anyone can provide an example of such file for: login.rule
When I run my application I get the following error:
Exception in thread "main" java.lang.SecurityException: C:\workspace\Ds\login.rule (The system cannot find the file specified)
Assuming I create such file - what should be the content inside?
Thank You!
Security.setProperty("login.config.url.1", "file:C:/workspace/Ds/login.rule");

Hello Friend,
The detailed instructions for setting up an external LDAP
provider for WLS 7.0 can be found at the following link.
http://e-docs.bea.com/wls/docs70/secmanage/realm.html#1172008
I hope that helps.
Regards,
Tom Hegadorn
Developer Relations Engineer
BEA Support
"Friend" <[email protected]> wrote:
>
Is there any example I can follow to setup a LDAP as the default security
realm
for wls7.0 ?

Any example for using LDAP for WLS7.0

Is there any example I can follow to setup a LDAP as the default security realm
for wls7.0 ?

Hello Friend,
The detailed instructions for setting up an external LDAP
provider for WLS 7.0 can be found at the following link.
http://e-docs.bea.com/wls/docs70/secmanage/realm.html#1172008
I hope that helps.
Regards,
Tom Hegadorn
Developer Relations Engineer
BEA Support
"Friend" <[email protected]> wrote:
>
Is there any example I can follow to setup a LDAP as the default security
realm
for wls7.0 ?

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

Hi Experts,
In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
thanq

hi
check these links out
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
regards
vijay
reward points if helpful

I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

I have an external hard drive of the brand Western Digital.
Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
And now I wonder: is there any way for me to get back my lost files or are they lost forever?
Thank you in advance!
//Gina

A data recovery specialist or some data recovery programs should be able to help. Most format simply rewrite the directory tree saying no files are on this disk. The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them. Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone. This type of format takes a long time to complete.
I'm not making a recomendation of a particular program but here is one company that does what you ask:
http://www.remosoftware.com/mac-recovery The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
Good luck and don't write anything on the freshly formatted disk until you decide what to do.

Is there any option for voting on a list item in SharePoint 2013?

Dear All,
I am looking for a feature vote a for list item from multiple users and need to show consolidated results on that.
for SharePoint 2013 we have "like", "rating" by using these can we show the consolidated results.
otherwise is there any alternative for this.
Thanks & Regards,
Jithendar

I haven't seen any OOB vote feature in sharepoint list. It's better to go with "like" or "ratting" options.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

Is there any Example for N9010A EXA Signal Analyzer

Similar Messages

Maybe you are looking for