Is there any facility to store session data temporarily and use it for Calc

Hi
I would like to know is there any facility to store session data temporarily and that can use it for calculation int BI Beans.
ANy idea or thoguhts would be appreciable .
Thanks n Advance
Anwar

One way to do is to create a temporary variables in the AW and store values in these variables. Not sure if it fits on what you are doing. You can always store data on the BIBeans Applications layer. Not sure what your use-case is.
Swapan.

Similar Messages

  • Are there any good third party or otherwise apps and/or plugins for imovie'11?

    Are there any good third party or otherwise apps and/or plugins for imovie'11?

    Re: Plugins for iMovie 11
    Someone just asked this question yesterday. So I am cutting and pasting the answer From Bengt Warleby
    Hi
    You can not.
    Nor to iMovie'08 or 09 or 11 - They do not accept any Plug-ins.
    How about FinalCut Pro X - I don't know but i regard to Apple way of progress - I doubt
    For iMovie up to HD6 and FinalCut Express and FinalCut Pro up to 7.0 - there are plenty.
    Yours Bengt W

  • I have various devices with different capacities, but my iphone 5 won't sync as it says i'm overcapacity? it there any way to store onto the icloud and not the device?

    I have an ipad and iphone 3gs 32gb, an iphone 5 and nano 16gb and also purchased 15gb on icloud. My iphone 5 won't sync as it says it is over capacity. Is there any way to store on icloud and not my device? Is having the various capacities on each device is pointless?

    Just select less to sync with the iphone 5.
    Each device will only sync what you select.

  • Iphone 3GS was dropped and will not turn on or respond to USB connection.  Is there any way to extract the data off when it is not responding so that I can restore to my new phone?

    The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone.  Is there any way to extract the data or back up the hard drive without repairing the phone?  Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data.  Any thoughts here or should a good repair shop being able to create a backup somehow?

    Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.

  • When updating to the latest OS X my wife's Mac Book Pro locked at a grey screen with an apple icon and status bar.  Is there any way to recover the data on the laptop and complete the OS install?

    When my wife's Mac Book Pro was being updated to the latest version of OS X the laptop locked up at a grey screen with the Apple icon and status bar.  Is there any way to recover the data and complete the install?  I have not tried anything yet because of the data issue.  I am not sure which OS X version as I did not install the software.

    Used Macs of every description are always available on Ebay and Craigslist and from a plethora of online used-Mac resellers. Apple sells refurbished late-model Macs at 10-20% discounts with a new-computer warranty and the opportunity to extend the warranty with AppleCare.
    http://store.apple.com/us/browse/home/specialdeals/mac

  • One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

    One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

    Wow, have seen Files do that, but a whole Folder as I recall!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

    If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

    What happened to your metadata? Are you sure the metadata is gone?
    In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

  • Is there any way to retrive the data from my USB Key

    Hello,
    I have a usb key I have been using on a Win 7 desktop computer and a Mac Book Air to put in Data on a spread sheet.
    I interchange to put in the data between the computer and my MBA without any problem.
    I am today not able to open the usb memory key in either-Computer or the MAC Book Air.
    Does that mean I have a coruppted USB memory key and the data lost for ever?
    I have just put the USB memory key in my computer and it says File System CDFS.
    I put it in MAC Book Air and it would not open either!!
    Is there any way to access my data. I have no back up...

    If the USB drive won't mount on either computer, it's probable that the drive has failed, in which case it's unlikely that you can recover any data from it. You can do a web search for something like "flash drive file recovery" and you'll find a number of utilities that purport to do file recovery, but all the utilities I'm familiar with require that the drive at least be mountable. There may be services that could attempt recovery, but they tend to be expensive.
    The moral of the story is: never have only a single copy of a critical document, and if you must, never, never have your single copy only on a flash drive (or floppy, for those "old timers" who still use floppies).
    Regards.

  • Is there any way to print  the data inside  the Notes field of MIR6 Report

    Hello Gurús.
    We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
    Is there any way to print  the data inside (comments)  the Notes field as well in the Report  ?
    We found that the only way is to open the Notes and print it, but it takes time, any idea ?
    Rgds.
    MCM.

    There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

  • I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I have written a binary file with a specific header format in LABVIEW 8.6 and tried  to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

    I can think of two possible stumbling blocks:
    What are your 8.6 options for "byte order" and "prepend array or string size"?
    Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
    LabVIEW Champion . Do more with less code and in less time .

  • Is there any way to get Session

    Hi All,
    Is there any way of getting the HttpSession object reference using sessionid?
    thanks in advance
    Raghu

    Only by looping over all the sessions and comparing
    the id to the id you wantHow do you get all the sessions collection?

  • Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

    Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?

    Only if this program will get the iPod out of recovery mode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Is there any method to export the data from oracle 10g in any format !!!!!

    is there any methods to export the data from oracle 10g in the format of excel or csc or txt or anyother. i already downloaded the sql developer tool but it only exports the data of upto one lakh rows ,but i have two tables of more than 3 lakh and 10 lakh rows respectively.for this i used 'where' command to break the file through sql developer but that didnt work
    plz help me out if any thing possible
    i need to again import this data into microsoft sql if there is any direct method plz let me know
    its urgent
    Message was edited by:
    user628031
    Message was edited by:
    user628031

    Take a look at DUMP_CSV function by Tom Kyte.

  • Is there any function module to convert date format?

    Is there any function module to convert date format from mm/dd/yyyy to dd.mm.yyyy or sy-datum?

    Hi,
    wirte statement converts any date fomat in system date fromat
        WRITE w_DateTO w_date_sys.
    Regards,
    Sriram

  • JPA and CAF BO - are there any editors of the JPA data (like CAF)?

    Hello!
    As you know SAP invented some layer above JPA and called it CAF. There is a very convenient way to edit data in CAF.
    But now I have to create a complex database scheme, also with CAF doesn't allow us to work with objects. So we can't use someObject.getChildren().
    So my question is are there any editors of the JPA data (like it is done in CAF)?

    Hi Kirill,
    at the beginning of our project at the end of 2009, we did a deep analysis of CAF since our architect vehemently suggested to use this framework.
    First about the history and purpose of CAF: Initially, CAF was never meant to be a layer above CAF since CAF was invented in the time before EJB 3.0 and JPA standard where writing persistence with EJB 2.x CMP forced the developer to write pages of boiler plate code. This background was approved by SAP.
    With upcoming of JPA, CAF ist mostly useless (except for very simply structured data) and prevents you from writing good software.
    It is easy just to write @Entity, @Id and @OneToMany (for complex database schemes) and CAF forces you to use an ugly, imperformant database scheme (e.g. CAF uses mapping tables even for 1:n relationships, a clear antipattern!)
    The CRUD-services generated with CAF are a pain, too. Usage of pessimistic locking is not up to date for web applications.
    With your complex database schemes, you exceed the limit of CAF.
    (We decided not to use CAF and did never regret this.)
    Concerning your question: There is an "JPA Details" view in NWDS that might help you. It needs JPA Persistence facet on your project to work. Developed by SAP. For JPA beginners, it is a good cheat sheet for JPA annotations and their attributes.
    You do not need more since a JPA POJO is easy to code.
    Regards,
    Rolf

Maybe you are looking for