Is there any feature equivalent to hibernate mode?

I would be obliged to be illuminated if OS X (10.9) supports some kind of hibernate mode as in Windows. I find the "sleep mode" -- can it anyway be optioned to go for hibernation?

See this article about making sure Safe Sleep mode is enabled.

Similar Messages

  • I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

    I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

    After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
    I continued to use the phone on EDGE mode for two more days until the problem was fixed.
    I even got a call back from a tech support guy asking me if my phone was working properly....
    I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

  • Is there any feature in Oracle 9i like SQL Adviser ?

    Hi,
    How can i use the SQL Adviser in Oracle 9i, I am not whether it's the feature of Oracle 9i or 10g.
    If not , can anyone tell me , is there any feature in Oracle 9i like SQL Adviser.
    Raj

    answered

  • Are there any feature same with the ResourceBundle for I18N in JavaFX

    Are there any feature same with the ResourceBundle in JavaFX, the I18N support

    No, shouldn't have any problems

  • Is there any feature in Endeca to support the natural language search ?

    I am looking to evaluate Endeca for implementing search for a help-center kind of a site where there are list of questions and answers available and the requirement is to provide a search for this content. The guest user can type in question or some search terms in the box to get the right question and ultimately the answer to the question.
    However; what I see from the basic tests is that there will be demand of natural language search for verbal matching. I understand that some part of this feature is supported by stemming in Endeca but that dictionary is not the complete list. It will not be a scalable solution to have business update this word forms in the stemming dictionary time and again for such requirement.
    Are there any thoughts on the above problem ? What can be the possible ways to move ahead ?
    Thanks,
    Nit

    Here's a few tips:
    - First, Endeca doesn't do natural language processing.  It is very literal with the words that are entered and matched.
    - By default, the MDEX limits the number of search terms to 10 by default.  Meaning if you entered 11 or more terms, terms #11 and so-forth would be ignored.
    - You can increase this by setting the --search_max flag (typically configured in the <dgraph-defaults> section of your appConfig.xml
    - Now, you can increase this to be quite large (say 200 terms).  Then, when a customer enters in their problem description, it won't ignore terms.
    - Use the "Match Any" match mode.  Now, this might give you a lot of search results, but that goes to my next point.
    - Use the NTerms match mode as your first relevancy ranking module.   This will order the results based on the number of terms
    - Make sure you have a good set of "Stop Words", like "the a and it was is of", etc.
    So now what will happen is that the customer will enter their problem, and you'll submit the whole thing to the mdex.  The MDEX will throw out the stop words, and then order the results based on the number of terms that matched.
    Some other relevancy modules to think about:
    - WFreq / Weighted Frequency.  This counts the frequency of words that are more important.
    - Stay away from Phrase and Exact.  They'll almost certainly be too slow.
    - Use a Static module based on the view count of an article, so that more popular articles will show up first.
    You might also want to turn off these MDEX features:
    --wb_noibrk    Disables word-break insertion analysis.
    --wb_norbrk    Disables word-break removal analysis.
    If you're going to submit big sets of search terms, those features will probably be too slow.

  • Are there any features that the current Extreme AC is missing?

    I'd like to upgrade to a new Extreme AC, though I do not need one just yet, I could benefit from faster home networking though. What I'm wondering is if this first gen Extreme AC router is missing any features that should have been included with it based on current industry standards? In other words, should I wait a bit longer or is the current AC likely to be the same one sold for the next few years? I remember that there were a few iterations of the Extreme N with different frequency ranges, this is an example of what I'm referring to.
    Thanks.

    ... What I'm wondering is if this first gen Extreme AC router is missing any features that should have been included with it based on current industry standards?
    Doubtful. It complies with all the standards that can be complied with, and the 802.11ac standard was just finalized a few months ago.
    There were various upgrades for the 802.11n Extreme but the one you appear to be referring to is its simultaneous dual band capability. The frequencies it uses are accepted international standards for which there have been no changes since it was introduced. There have also been incremental improvements in antenna design. All those improvements have been incorporated in the latest Extreme.
    If you want to wait for the next best thing, you are likely to have a very long wait.

  • Is there any way to renovera flight mode from up menu?

    hi,
    I Wonder if it's possible to remove the flightmode option from the drag up menus?
    in case I lose my phone, its easy without entering my passcode to remove my service so I can't locate the phone through find my phone.
    Then the passcode or my services doesnt matter at all. Please if you know any option to do this, please help
    me! Since I'm precautious with loosing my phone - again.

    They did.
    Consider using Guided Access, as decribed on page 107 of the iPad User Manual below.
    iPad and iPad mini User Guide (For iOS 6.1 Software)

  • Is there any feature available to book mark a whole window containting few tabs? (not using home page)

    Imagine you got few windows open and each window containing few tabs. If i want to book mark each window separately with a given name is it possible in firefox 4.???
    Im aware of using home page to bookmark a window..but it just allow one window...i mean as much as u need..???
    ex...Window 1 (tab 1,tab2,tab3...tabn) -bookmarked as B_1
    Window 2(tab 2,tab2,tab3...tab n)-bookmarked as B_2
    Window n(tab 2,tab2,tab3...tab n)-bookmarked as B_n

    Beautiful!...thanks ...that make every thing organized... loving it...

  • A feature equivalent to Auditioning clips

    Is there a feature equivalent to auditioning clips as in FCP X? I'm transitioing from FCP to Adobe Premiere Pro CC and can't find a feature similar to auditioning clips. I like to compare more than one clips in the timeline, but I can't figure out the effective way to do it. Is there a similar feature in Premiere Pro CC or is there another way to compare clips in timeline?

    I'm looking for a feature like this:
    "you can stack multiple shots in one place in your timeline and cycle through them to choose the best one."
    What I'm trying to do is exatcly this. I have more than one clips that I'm deciding which works the best. With FCPX, you can easily try out multiple clips with the Auditioning feature.
    I'd like to try a couple of more shots in a particular shot, but I don't necessarily want to edit it in, take it out, edit another shot in, and take it out...

  • In Aperture, is there any way to remove the speckled effect from scanned early matt prints?

    I have a number of photos from the 1960s and 70s, the surface of which is covered with a matt effect. I suppose this was designed to stop fingerprints, but when scanned it shows up as a fine network of bright semicircles. The images are dreadful. My scanner has a setting that will remove this pattern, but at the cost of reducing the resolution to little more than 100 dpi, making the scans virtually unusable in anything like a Photobook. Are there any features in Aperture that might help? Or failing that, perhaps in Photoshop?

    What you need, is a dedicated image restauration filter that recognized the regular frequency pattern superimposed onto the prints. You can do this in advanced Image processing packages that let you compute the fourier transform of the image and then suppress or attanuate the frequency bands of the artefact with a band-stop filter.
    But neither Aperture nor PhotoShop have this kind of filter. In Aperture and Photoshop you can only soften the effect by blurring and then exporting a smaller version of the image.
    The algorithm that your scanner uses is probably the best that can be done, even if the resolution is only 100 dpi. 
    Do you still have the negatives? Scanning the negatives at a high resolution may give you better results.
    Regards
    Léonie

  • Is there any way to run Classic on an Intel mini running Tiger?

    Due to space limitations, I'm having to retire my old faithful Powermac 6500. It's hard to believe that it's 10 years old. It's running OS8.6, and can run OS9 even though it seems slow and memory intensive.
    Is there any way to run Classic mode on my Intel Core Duo mini? It's hardly a matter of life and death, but I still have several older Mac-based games like Railroad Tycoon II and Myst that I enjoy, and they won't run on the newer mini.
    If space wasn't a problem, I would keep the old machine running just to play games, but it's not possible now.
    Any assistance would be appreciated.
    Thank you,
    -Bill

    The only way is to install (free) emulator programs such as BasiliskII or SheepShaver.
    I have both installed, though I only use them to run older programs to rescue old data from obsolete formats.
    Installing and configuring them is not trivial, unfortunately.
    Links here:
    http://basilisk.cebix.net/
    http://gwenole.beauchesne.info/projects/sheepshaver/
    I don't know if either is suitable for the kind of games you want to play. Graphics is typically where emulators fall behind. But again, I have no experience with those games.

  • If I take off ALL my toolbars, is there any way I can get them back without restarting in Safe Mode?

    I needed more of a browser window to run a tutorial, the start button was below sight of my window. So I took off all my toolbars and then I had enough room to see the top of the start button (tab?), enough for it to work. But then I had no toolbars and ended up having to restart in Save Mode and reset them. Is there any way to at least get back the menu toolbar when they have all been deleted? Thanks, Bill

    1. The '''F11''' key is for toggling Full Screen mode. That will give you more room than hiding all the toolbars does.
    2. Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
    Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
    The F10 can also be used on most PC's to temporarily reveal the Menu bar.
    https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  • Is it possible to install a module only for the private mode (i would use https everywhere only in this mode). Is there any way to do that ? Thanks

    I would use the module "https everywhere" wich is an extension that encrypts communications with many major website. The thing is that i dont want to use it all the time.
    The way to use it perfectly would be to activate it only when i'm in private mode (wich makes sense IMO).
    Is there any way to install / configure it in order it's effective in the private mode but not in the normal one ?
    That would be a great feature but i found nothing about it.
    Btw, sorry for my bad english, not my mother tongue anyway ;).
    Thanks for your support.
    Best regards

    I know i m running on firefox 24, but i m working with GWT plateform and there is no pluggin for version higher than 24.
    Thank you for your help, it fit perfectly with my issue. Much appreciated.
    Best regards

  • HT204266 I erase all application of my iphone 4 with erase restore and now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file i just want my i phone ok and work smoothly as new p

    Hi,
    I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.

    See Here  > without the Backup  >  http://support.apple.com/kb/HT4137

  • My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop

    My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop

    The phone will automatically re-appear when it connects to the Internet. However, don't get your hopes up, as thieves know this & will make sure your phone never re-connects so you can locate it.

Maybe you are looking for

  • Error getting return value from function

    Hello I'm getting a error calling a function with ODP.NET from C# Code: OracleCommand oraCom = new OracleCommand("NORMALIZACION.nif",oraCon); oraCom.CommandType = CommandType.StoredProcedure; OracleParameter param1 = new OracleParameter("numnif",Orac

  • How can I get itunes to play one album from start to finish, especially when there are different artists on it?

    How can I get itunes just to play albums from beginning to end? Often if an artist has a guest artist, or there are 'various artists' on the album, it stores them all separately, so listening from beginning to end becomes not one click away, but a mu

  • Manual for Sports Tracker

    Hi !      It takes a long time (can be up to more than 10 min) for my Sports Tracker to get a signal from GPS.  I wonder if it has to do with the setting "GPS Filtering" ? But there is no help for ST.  I wonder where I can get the manual ?  And what

  • How to automatically turn off leds after 1 minute/button press

    I need help on how to turn off my LEDs 1 minute after my program starts or when the stop button is pressed.. I tried putting a while loop over the LEDs but it doesn't work.. Also the score automatically resets after 1 minute.. how do I maintain the s

  • Identity of FMCYPREP entries in FMBL tables - Funds Management

    Dear Experts We have transferred the budget data planned to version 0 using t code FMCYPREP. However the internal budget process field "PREP" is not available any of the FM tables including FMBL and FMBH. How can we identify from the line items the s