Is there any function to automatically adjust the voice volume in the multitrack

I'm trying to mix voice sounds and music files into one track. Sounds easy! But almost every music has its loud parts(for example the climax) and quiet parts. Therefore when i listen to the voice and the music at the same time, the voice files are sometimes relatively too quiet and sometimes to loud. I don want to adjust the volume pan one part after another because I have a lot of files to mix. Could you tell me is there any function I can use to automatically adjust the voice volume to make it always 'just a bit higher than the music'? Or can I read some documents about this problem?
Thank you very much!

Sounds like you want to do what is called "ducking" & "side chaining".
First try using a compressor and or limiter on the voice tracks to get a more even volume.
Google: Audio Ducking tons of stuff on how to.
I myself have never tried this with Audition, or the compressors that come with it. I have done it in other multitrack software and older versions of Dave Browns Compressor.
Duff

Similar Messages

  • Is there any wa to automatically cancel stopped scripts? will the "Don't ask check box do this?"

    Firefox continually hangs when scripts stop and the stop script or Cancel ( I think) option comes up. Is there any way to automagically cancel the script so Firefox can continue. This junk is usually ads or some long wait to report to some snooper.

    You shouldn't have that problem with scripts that take too long to finish.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Is there any function modules or BAPI's

    Is there any function modules or BAPI's that would delete the original partner and then add a new partner.Iam using BAP
    bapi_alm_notif_data_modify
    But iam not able to change partner in notification header
    Please give your input for sovling it

    Dear Rama,
                           In the bapi_alm_notif_data_modify, there are 2 structure
    NOTIFPARTNR STRUCTURE  BAPI2080_NOTPARTNRI OPTIONAL
    NOTIFPARTNR_X STRUCTURE  BAPI2080_NOTPARTNRI_X OPTIONAL
    Pass yr partner value in NOTIFPARTNR, and against the value make it "X" in the NOTIFPARTNR_X  , then u can change the partner value.
    Give point if helpfull
    Thanks

  • Is there any function module? Fiscal week no problem

    Hi friends,
    I want how to get physical week for given date.
    Ie for 01-04-2009 week no is 1.
    Is there any function module?
    Pls suggest
    Regards
    Moosa

    Hi,
    Use the below code.
    DATA: v_ersda TYPE sy-datum VALUE '20090618'.
    DATA: v_month(2) TYPE c,
          v_week(2) TYPE c,
          v_full_week LIKE scal-week.
    MOVE v_ersda+4(2) TO v_month.
    CALL FUNCTION 'DATE_GET_WEEK'
      EXPORTING
        date         = v_ersda
      IMPORTING
        week         = v_full_week
      EXCEPTIONS
        date_invalid = 1
        OTHERS       = 2.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    MOVE v_full_week+4(2) TO v_week.
    WRITE:/5 'Month = ', v_month.
    WRITE:/5 'Week = ', v_week.
    Regards,
    Kumar Bandanadham

  • Is there any function module to trigger workflow template

    Hi,
    I have created a workflow template in tcode PFTC, which i am using to send email, this workflow needs to be triggered once the document is posted, there are no events being triggered at that stage, My query is 'Is there any function module to trigger this workflow template from the user exit'?.
    Thanks in Advance
    Santosh

    Use FM
    SAP_WAPI_START_WORKFLOW.
    or if you have triggering event for the wflow use
    SWE_EVENT_CREATE
    SAP_WAPI_CREATE_EVENT
    Thanks
    Arghadip

  • How can we get the image which is stored in clipboard by labview, is there any functions available like text from clip board

    How can we get the image which is stored in clipboard by labview, i can get the text in clipboard by using invoke node directly.but i cannot get the image, is there any functions or vi available.(image is in Png format)

    The Read from Clipboard method is, unfortunately, limited to text. If the clipboard contains an image then you need to use OS-specific functions calls. This is an example program for Windows. It's old, but it should still work.

  • Is there any function module to get the variables used in a query?

    Hi experts
    Please, do you know if is there any function module to get the variables used in a query?
    Thanks and regards
    Luis

    Hi Srini
    Yes, I have checked the tables but I need a function module
    Thanks anyway!
    Luis

  • Is there any function module to convert the date format

    Dear ABAPers,
    Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
           I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
    Thanks & Regards,
    Ashok.

    hi,
    create custom function module or copy the below code in the report ..and use it
    the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
    FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
    ""Local interface:
    *"       IMPORTING
    *"             VALUE(DATE) LIKE  SY-DATUM
    *"       EXPORTING
    *"             VALUE(FORMATTED_DATE)
    *"       EXCEPTIONS
    *"              INVALID_DATE
    TABLES: TTDTG.
    DATA: BEGIN OF T_DATE,
            YYYY(4) TYPE C,
            MM(2) TYPE C,
            DD(2) TYPE C,
          END OF T_DATE.
    DATA: DAY(3) TYPE N.
    DATA: VARNAME LIKE TTDTG-VARNAME.
    IF DATE IS INITIAL.
      CLEAR FORMATTED_DATE.
      EXIT.
    ENDIF.
    check document date format
    CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
      EXPORTING
        DATE = DATE
      EXCEPTIONS
        PLAUSIBILITY_CHECK_FAILED = 1.
    IF SY-SUBRC NE 0.
      RAISE INVALID_DATE.
    ENDIF.
    MOVE DATE TO T_DATE.
    CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
    SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
    WRITE T_DATE-DD TO DAY.
    CONCATENATE DAY ',' INTO DAY.
    CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
      SEPARATED BY SPACE.
    ENDFUNCTION.
    the output is :--Convert a DATE field into a full format date eg. March 23, 2000
    Regards,
    Prabhudas

  • Is there any function to change the width of forms'graphic ?

    Hi All,
    Is there any function to change the width of forms'graphic ?
    May be like set***property.
    Thanks,
    ke xiong

    No. Graphics cannot be handled at runtime.
    Francois

  • Is there any function to change the width of froms'graphic ?

    Hi All,
    Is there any function to change the width of froms'graphic ?
    May be like set***property.
    Thanks,
    ke xiong

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
    Regard
    Helios

  • Is there any function module getting the cpu type?

    Is there any function module getting the cpu type?

    I guess the database server...
    I would like to get the SAP system cpu type as done in transaction st06 under system information.
    Thanks.

  • Is there any FUNCTION I can use to check the existence of a USER?

    Hi,
    Is there any FUNCTION I can use to check the existence of a USER? I dont want to write a function by myself to access usr01 directly.
    Thanks in advance.

    You can use FM USER_EXISTENCE_CHECK
    Thanks
    Seshu

  • Is there any Function Module will give the Transactional data of a cube?

    Hi Experts,
    I have one Infocube Zco3_BILT , I need to write a routine (BADI Program)on top of this info cube  to fetch a characterstic value in the infocube.
    F table  & Etable wont give any characterstic values.
    Is There any SAP provided FM to give characterstic values of the Infocube.
    Thanks in advance.
    Regards
    Mohan

    Hi Mohan,
    this is correct since the values are stored in different tables (fact, dimension etc) due to star sheme modelling. As far as I know there is no standard function module for this issue.
    However ABAP report RSDD_SHOW_ICUBE might help. This is the report for transaction listcube, all relevant data is build up, there you should find all necessary steps and standard reports/modules to fetch the required characteristic value. Although I do not know the exact requirement you will probably have to work with SID values.
    Perhaps this will help resolving your issue.
    Best Regards,
    Marcel

  • Is there any function module to Change the System Status

    Dear ABAPers,
             I am working in the Customer Service Module.I want to change the System status.
    Is there any function module to change the System Status.
    Thanks & Regards,
    Ashok.

    Hi Ashok
    Service Order status update function module ?
    How to set the system status
    Check above threads,
    Regards,
    Syf

  • Is there any way to send more then 1 parameter to the listener function?

    Hi guys, so is there any way to send more then 1 parameter to the listener function?

    Hi,
    sure.
    The first variant is to add many parameters to event.
    The second variant is to extend calling callback functions.
    For example,
    public function addCallBack(eventName:String, callBack:Function = null, ... rest):void
         // save callBack function and event type and other args (rest)
         addEventListener(eventName, myHandler);
    private function myHandler(event:Event):void
         // get function and args by eventName
         fnc.apply(null, [event, args]);

Maybe you are looking for