Is there any help for a cracked iphone after dropping it?

is there any help for a cracked iphone after dropping it?

If you have the new AppleCare+ service, then yes:
http://www.apple.com/support/products/iphone.html
Otherwise, maybe. Regular AppleCare, if you have it, can't help you. But you might still be able to get it repaired – of course, any repair will cost you. Apple will replace a damaged iPhone for a flat fee.
800-MY-APPLE (800-692-7753

Similar Messages

  • Is there any app for phone auto start after swithced off??

    Is there any app for phone auto start after swithced off??

    Are you looking for an app which will startup the Z10 at a specified time?
    I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help help help help. I just mistakenly deleted a Note from the Note App that I need.  I don't use iCloud. The only place I have the Note app is on my iPad and my iPod. What can I do? Is there any help for this?

    Help help help.
    I just deleted a note from the Notes App form my ipad3. I don't use iCloud. The only place this note was is my iPod and iPad. Is there any possible way to recover this note?????
    Thanks in advance

    Thank you sberman, yes the first thing I did was check my iPod. Instant synching works great between the iPad and iPod, so it was deleted there as well. On both devices I have my Notes account to the same account.
    I ashamedly have not synched to iTunes for ages. After I calmed down I realized that most of the info on that deleted Note I had copied and pasted from an excel file in November. I'm in the process of doing that again, and am only out the recent info.

  • Is there any help for ALV report development with  funcation modules?

    Hi,
    please tell me any help or example to understand the ALV function module.

    Hi neha,
    1. very simple alv
       (with minimum code)
    2. just copy paste
    3.
    report abc.
    TYPE-POOLS : slis.
    DATA : alvfc TYPE slis_t_fieldcat_alv.
    DATA : alvfcwa TYPE slis_fieldcat_alv.
    data : begin of itab occurs 0.
            include structure usr02.
    data : end of itab.
    START-OF-SELECTION.
      select * from usr02
      into table itab.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = sy-repid
          i_internal_tabname     = 'ITAB'
          i_inclname             = sy-repid
        CHANGING
          ct_fieldcat            = alvfc
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
    Display
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          it_fieldcat   = alvfc
        TABLES
          t_outtab      = itab
        EXCEPTIONS
          program_error = 1
          OTHERS        = 2.
    regards,
    amit m.

  • Is there any Help for video from iPhone3GS?

    Can anyone please tell me how to get the video from my iPhone3GS to transfer upright?  All videos sync sideways. 
    Is there anything I can do to fix this?
    I still have the videos on my phone and can sync again if necessary.
    Please help.

    If you have the new AppleCare+ service, then yes:
    http://www.apple.com/support/products/iphone.html
    Otherwise, maybe. Regular AppleCare, if you have it, can't help you. But you might still be able to get it repaired – of course, any repair will cost you. Apple will replace a damaged iPhone for a flat fee.
    800-MY-APPLE (800-692-7753

  • WRT160N issues - is there any help for us?

    I've had a 160N V3 v3.0.02 for about a month.  WEP mode meant never getting a certificate on my wireless laptops and dropped connections.  Laptops are all Windows XP with latest greatest updates, and 2 use G class wireless cards, one has a built in N class wireless card.  WPA2 Personal mode has helped getting authenticated by the router, but access speed goes from 1 to 72 with very little steady state.  All laptops will drop out at least once every ten minutes or so, and my router often doesn't show up in the list of available routers.  It may take 30 mins before the thing(s) can reconnect.  Of course, the only hard wired ethernet connection to a PC is working fine and dandy.  it's the wireless side.
    Using Search I can see I'm not alone, and not hopeful there is a solution.  Should i just downgrade to a WRT54G2???  Are they trouble free?  My old one worked fine but I gave it away when I got the N class router.
    John
    (Mod note: Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 11-29-2009 06:34 AM

    Try to adjust the wireless settings on the router...Open the setup page of the router and Under Wireless tab,Change the Network mode to "Mixed"...Change the SSID to some unique name,Channel Width to 20MHz and Channel to 11 and click on save settings..Under Advance Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    As you are getting the IEEE error on the laptop,it is the addition authentication on the laptop.It has nothing to do with the router.You can change the Security to WPA or try the following steps ...
    Click on the Start button >>Control Panel >>Network Connections- Here right click on the "Wireless Network Connection" icon and select Properties- Click on the 'Authentication' tab- Uncheck "Enable network access control using IEEE 802.1x" and click on Ok.  

  • Is there any help for this..

    Hello friends,
    I am not getting any answer from the experts of oracle. Why I don't know?
    I am asking a simple question realted to forms. I want to keep my form 'always on top' of other running application in windows for a specific requirements. How to do this?
    If anybody know, then please let me know. If YES, then how?
    If NO, then Why?
    regards,
    Praveenkumar Talla (Pune, India)

    Hello Praveenkumar,
    an answer (that I'm not sure if will fit your need) could be the following:
    open your form, look for the Window you want to keep always on top, and set the property 'Window Style' to 'Dialog box'. When it's defined as 'Document', your window stays inside the window that Forms Runtime open.
    Hope this help, although I'm not sure if this will help you.
    Best regards,
    Franklin Gongalves Jr.
    [email protected]
    Hello friends,
    I am not getting any answer from the experts of oracle. Why I don't know?
    I am asking a simple question realted to forms. I want to keep my form 'always on top' of other running application in windows for a specific requirements. How to do this?
    If anybody know, then please let me know. If YES, then how?
    If NO, then Why?
    regards,
    Praveenkumar Talla (Pune, India)

  • Is there any help for new iWeb users?

    the tutorials I've found are inadequate for the most basic web site design and editing. I would like to do simple things like changing fonts, linking pages but there is nothing. Help

    Here are a series of video  tutorials by Apple: Apple - Find Out How - Web - iWeb.  And here's the iWeb manual in PDF format: manuals.info.apple.com/en/iWeb_Getting_Started.pdf.
    This is an illustrated Manual from Bowling Green University:
    www.bgsu.edu/downloads/cio/file85786.pdf.
    and this is Apple's manual:
    manuals.info.apple.com/en/iWeb_Getting_Started.pdf
    OT

  • Is there any hope for mac user

    i got the zen vision m 30 gig for xmas and just this week i got a mac computer... i tried to load the software to the mac but i think that since its for pc that i cant use it.. is there any help for me...
    tom

    Hello kpratta,
    There is some hope. I have heard of someone putting the ipod in a bag of dry rice and putting the bag in a dark place for a 4-5 days. After that they used this:
    www.apple.com/support/ipod/five_rs/
    This has the best chance. The rice absorbs any liquid in the ipod.
    Hope this helps.
    ~Julian

  • I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.

  • Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

    s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
    Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

    This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
    Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
    http://www.apple.com/batteries/iphone.html

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • HT204266 I erase all application of my iphone 4 with erase restore and now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file i just want my i phone ok and work smoothly as new p

    Hi,
    I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.

    See Here  > without the Backup  >  http://support.apple.com/kb/HT4137

  • I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

    Try this:
    Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
    If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
    If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

  • I recently gave my old iPhone to my nephew, he switched it to his phone account, but somehow I now have his contacts on my new iPhone 5. When I look at my iCloud account, it lists his contacts. Is there any way for me to get my contacts back?

    I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?

    This is caused by using the same iCloud account on both phones.  When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account.  To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores). 
    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
    As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source.  You could try restoring to your last backup but this doesn't always work for contacts.  (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.)

Maybe you are looking for

  • How to display an HTML file in text Area?

    I am trying to display an HTML formated file in  text area component using Action 3.0. The following script does not generates compiler errors, each function seems to be executed yet the file is not displayed. When trying the same code with myCV.txt

  • Colour synchronization management

    i'm running adobe bridge cs2 v1.0.4.6 unfortunately it has no 'colour synchronization management'... how can i get the above mentioned program to appear in the bridge center... i've already checked the 'preferences/general tab/favourites item'...but

  • Spam blocker in Outlook 2010 is not working.

    I go into the program and add to the list of domains I want to block. It just does not work. I am blocking them by going into Junk via opposite mouse button and then options and the Block Senders tab and then I click on add. I add a domain as @donotw

  • Tables for variance calclation

    Hi Experts, My Client has a different requirement for variance calculation. Client want the Production order variance to be calculated based on their budgeted cost and not with reference to Target cost which is again based on Standard cost. Client re

  • Iphoto hid my pictures when opening a CD of pictures

    my sisters wedding picture cd asked me for an update before i could open it in iphoto, then when i went to events only the pictures from her cd were in iphoto. now i have a bunch of icons on my desktop and NONE of my 3,000 pictures can be found in ip