Is there any hope for a printer with ink system failure...​I took my cartridge with me to the store

I didn't realize I needed to leave the cartridge in...I have tried all your suggestions & nothing works!

alanfromwickford wrote:
just to add, i'd remove the back case to allow mor rapid drying, but expect the wosts - because it's less disapointing if you then lucky
What a colossally bad idea!  To anyone reading this thread DO NOT DO THIS!!!  Once anyone other than an Apple Authorized Service Provider (and that doesn't automatically mean your carrier, just FYI) opens up the device, then ALL options from Apple are gone, permanently.

Similar Messages

  • Is there any hope for Mac users with AMD D700 graphic cards trying to run Adobe Premiere 2014 CC?

    Who wants to watch a grown man cry?  I spent a small fortune on a shiny new mac with 64GB Ram and to quote Larry Jordan, "I could rocket to the moon with the power of this computer."  I am running OSX (10.9.5) and have a 12 gig per channel ethernet Maxx Digtial Raid with Areca cards to support 6K footage.  However, editing my first project in Premiere CC2014 (leaving FCP 7) has been nothing short of problematic.  At first, it plays great but after 20 minutes of editing, speed changes, adding secondary shots etc it starts to play choppy, freeze on certain frames playing just audio and eventually crashes or it takes a minute to render.
    I did every possible thing yesterday with Adobe and Apple support.  I reinstalled the OS, I trashed 3rd party preferences, trashed Premiere preferences, set project settings from OpenCL to software only and I tried changing location of the Premiere Cache folder but nothing seems to work.  Eventually the last Adobe support person said it was due to the AMD card and Adobe.  He was emphatic that it was Apple's fault.  Apple's support team said it Adobe's.  Well after that, Im still stuck.  Is anyone else experiencing this?  Any pieces of the puzzle?
    Is anyone else having the same experience?

    The default for CPU Voltage is By CPU VID default for Adjust CPU VID is Startup which should be 1.4 volt. Since Cool'n'Quiet requires a driver to run and I also show low CPU VID in cmos it should be 1.4v but I tried with Cool'n'Quiet disabled and also tried setting CPU VID to 1.4 but have never made it to 1.4 I also tried setting it to 1.425 which is the next step and still read under 1.4.

  • HT5527 What if i forgot to move my mobile me to icloud... is there any hope for me?

    I never switched my mobile me to icloud... is there any hope for me?

    At this point all your mobileme data has been deleted and the account is nonexistant. 

  • I was thrown in the pool with my phone in my pocket.  I was in the pool for a minute or two.  I got out dried it off and stuck it in rice.  Is there any hope for my hope?  If not, is there a way to fix it?

    I was thrown in the pool with my phone in my pocket.  I was in the pool for a minute or two.  I got out dried it off and stuck it in rice.  Is there any hope for my hope?  If not, is there a way to fix it?

    alanfromwickford wrote:
    just to add, i'd remove the back case to allow mor rapid drying, but expect the wosts - because it's less disapointing if you then lucky
    What a colossally bad idea!  To anyone reading this thread DO NOT DO THIS!!!  Once anyone other than an Apple Authorized Service Provider (and that doesn't automatically mean your carrier, just FYI) opens up the device, then ALL options from Apple are gone, permanently.

  • I accidentally washed my iPod nano. Is there any hope for it?

    I stuck my iPod nano in my pocket, and yes, forgot to take it out before my sister washed our clothes. Right after it got washed, I plugged it in to my computer, and it did turn on, just with a little distortion on the screen. It has been about a month now though, and the iPod won't turn on at all, even when it is plugged in. But iTunes recongizes that the iPod is plugged in.
    Is there any hope for my iPod, or would it be better just to save for a new one?

    I think that when you turned it on after it was washed, that was the end. If it's been a month and won't turn on, I would assume it probably won't ever. Start saving your money. Apple has refurbished models that carry the same warranty as new units and they are $50 less. Check these out:
    http://store.apple.com/us/browse/home/specialdeals/ipod/ipod_nano/16gb

  • Is there any hope for us here?

    I live in the Caribbean (Dominican Republic). I see the iPhone getting released in a lot of big countries, but I don't see Apple releasing the iPhone in other countries like mine.
    I have seen iPhones activated here, but as you know they are being ilegaly activated with the hacking options available, and with every new update the hacks get frustrated.
    Is there any hope for the iPhone being released in countries like mine here in the caribbean? What chances do you see for us here? Are we destined to live without the iPhone or with an hacked-outdated iPhone?

    The best thing to do is keep watching for announcements from Apple on when the iPhone will be coming to the Dominican Republic, since this is a user to user forum no one would be able to give you an answer.

  • Is there any hope for a Nano 6th gen that went through the washing machine?

    Is there any hope for a Nano 6th Gen that went through the washing machine?  All of the devices contents are showing up in iTunes when connected but the device itself is not working.

    Hello kpratta,
    There is some hope. I have heard of someone putting the ipod in a bag of dry rice and putting the bag in a dark place for a 4-5 days. After that they used this:
    www.apple.com/support/ipod/five_rs/
    This has the best chance. The rice absorbs any liquid in the ipod.
    Hope this helps.
    ~Julian

  • I dropped my phone down the toilet and before I switched it off I sent a text. I have left it to dry out for the last 48hiurs. Is there any hope for my iPhone 5c?

    I dropped my phone down the toilet and before I switched it off I sent a text. I have left it to dry out for the last 48hiurs. Is there any hope for my iPhone 5c?

    Probably not. First of all, 48 hours is not enough. 5-7 days is better. Secondly, if you did not turn it off the very instant you retrieved it, it probably did worse damage. Even if it powers on, it's very unlikely it will function 100%.

  • My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    I have not had any experience in getting any devices repaired so I'm not sure which store to resort to. An official Apple store should more than likely get you what you need, but I'm guessing it's probably more expensive. (if any cost for your situation)
    I hope you get your problem resolved.
    ~Lt. Leviathan

  • I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4.  It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition.  Help!

    Hi there 8472kck!
    I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    and that information comes from this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I goy my Ipad disable, is there any way to unblock it with no restore the system?

    I got my Ipad2 disable, i dont know why it dont recognized the passcode I set up on it.  Is there any way to unbloqued it with no restore the system?

    If you don't know the passcode, you'll have to restore your iPad from the computer to which it was last synched to remove the passcode.  If you don't have that computer, you'll have to restore the iPad as new, and you will lose all your data.

  • HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

    I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
    Does anyone have any suggestions?
    This question was solved.
    View Solution.

    Hey Spider! First off welcome to the forum.
    I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
    After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
    Thanks,
    SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I dropped my ipod 4 into the toilet. I tried turning it on twice,stupidly. Then put it in rice. Is there any hope for my ipod? and if not is there a way to get all 1500 of my photos? Pleaaase help!!!

    Hello i dropped my ipod in the toilet (clean water). Once i took it out of the toilet i pressed the home button and within a second it shut off! :( I quickly dried it with a towel and accidently pressed the top button!  D: and put it immediatly into a bag of rice. 3-4 hours passes and i tried to turn it on nothing happened.  I honestly tjougjt it would be dry...stupidly! and now its on the rice and has been in there for an hour since the last time i triwd turnong it on. Is there any hope that my ipod will be okay? and if not could it be repaired? How much is it to repair? One more question what will happen to my photos, is there a way i could atleast get my photos?!? Please please please help!!!!!! please!!!

    Hey Posada143, You can still try the rice thing, but do not expect much, as roaminggnome has stated. The rice only works if you do it ASAP and leave the iPod off-- do not attempt use, turn on or charge until it is completely dried out. This is probably academic at this point but remember this for the next time: The drying can take 10 days. You put the uncooked rice and iPod in a sealed bag, change the rice every couple of days. This creates a low humidity environment and draws the moisture out of the iPod, but it takes time. Turn your iPod on to earlier, and you run the risk of shorting out, damaging the components inside. Even if done correctly it can spotty. If you do get the iPod to work (and this may require Resetting, Restoring or attempting to place it in DFU recover mode) the first thing you do is make backups, because you never know how long it will continue to work. As for your pictures, if you can't get your iPod to work, you can try data retrieval companies, however; there is no guaranty it will work and it tends to be very expensive. In the future get in the habit of as making backups, because you just don't know. And invest in and use a water tight case. Hope this helps, Good luck. Cheers.

  • Are there any fixes for iPad 2 with OS 8.1.1.

    Are there any fixes for the iPad 2 IOS 8.1.1?  I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response.  These problems have been occurring since the last update.  At times the iPad becomes unusable.  I have been keeping all programs closed and history and web site data cleared.  Thanks for any help you can give.

    Hi, dannilee,
    I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
    To improve the performamce, I have tried these:
    1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
    2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
    3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
    Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
    Hope it is useful for you.

  • Is there any hope for my 5S after it's dip?

    Hi All
    I dropped my 5S in water two days ago.  I got it out in seconds, powered it off, dried it with a cloth, removed sim, and shook all water out and placed it in rice.  It's been in the rice in the airing cupboard for 48 hours.  So I took it out and tried it.  Nothing.  So, plugged it in to charge, it buzzed but nothing.  I left it a while, still nothing.  I flicked the mute button on and off and that buzzed too.  I tried holding down the home button and the power button but nothing.  So I've put it back in the cupboard in the rice.  Is there any hope???

    Nope. Even if it does start working again, it's only a matter of time before it fails completely.

Maybe you are looking for

  • Problem with software update - now can't log on to administrator account

    Hello - I updated software yesterday and didn't pay attention to what was updating. I always just install the updates when they come up. Now I can't login to my administrator account or change the password. I could log into another account, but iTune

  • HT1689 itunes store app on my ipod touch

    my kids were playing with my ipod touch and the itunes store app was deleted.  is there a way to get it back? 

  • Might Be OT - Need Help With DW Design

    I am in the midst of transferring Access reports to Oracle. A lot of these reports display percentage data. What is a best practice for storing percentage data in a data warehouse? Should I add on the percentage calculations at the fact table level?

  • Image not displaying on new podcast

    I have produced many podcasts over the years and have never had this problem. Once approved by ITS, the podcast image does not appear on the page (though it appeared in all tests prior to submission). All references to it are correct in the XML, but

  • Control design and simulation palette

    Hi all I've recently installed LV 8.2 professional edition on my PC. Watching the function palette i've seen the sub-palette 'Control design and simulation' empty... Is it normal? Do i need some toolkit to see something in it? King regards I love the