Is there any impact  if we delete the indeces on Ods

Hi Experts,
The data does not get updated until and unless we activate the indices of ODSes .This has to be done everytime, when we are loading data from ODS.
We are facing the problems in WBP900 as we are loading data from ODS to infocube .
Is there any impact, if we delete the indeces please let me know.
Thanks In advance
Sivanand

Deleting index will not create any problem ,  but if the indexes are used by the queries and if the indexes are relevant, then..
But you can always rebuild the indexes.
Ravi Thothadri

Similar Messages

  • I haven't used my i-pod in forever and forgot the password! It was disabled but is currently not. Is there any way I can delete the password on the computar instead of going to a Apple store? Please help:)

    Dear I-pod users,
        I haven't used my i-pod in a long time and I forgot the password It was disabled after countless tries but right now is not disabled.Is there any way I can delete  the password on the computar instead of going to the Apple store? ALSO, I believe my I-pod is a second generation (no camera) PLEASE HELP!!!

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software

  • Is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

    is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

    Ziatron wrote:
    With Snow Leopard if you delete a file (put it the trash) and then do a secure delete it's gone.
    The OP is adressing SSD's in particular. Neither Snow Leopard nor Lion have the ability to secure erase an SSD of a single file by user action. This because SSD's write data in pages, but can only delete in blocks. Secure emptying of the trash on an SSD is no different than a non-secure erase, as the controller will not permit erasure of blocks until the entire block is freed, which is almost never the case with even group file deletion. Erasure is simply the re-writing of the "allocation table" that the pages are no longer in use.
    SSD's are only rendered "erased" of previous data after an indeterminate period of use, and re-use that would eventually free blocks for re-write, and then actually over-written.
    TRIM helps speed this process, but does not alleviate the block versus page issue.
    Some additional info.

  • Is there any Function Module  to delete the  Responsibility for buyer

    Hi,
            I am able to insert a responsibility for a buyer using the FM, BBP_UPDATE_ATTRIBUTES. Can any one can tell me is there any FM to delete the responsibity for buyer. The BBP_UPDATE_ATTRIBUTES is not working for deletion and It is taking lot of time when i am trying to delete rsponsibility by using  the transactio code PPOSA_BBP .
    I found one badi, HRBAS00INFTY but there are no exporting or changing parameters in that badi to write some logic to delete.
    The  FM ,RH_BASE_UPDATE_DB_DIALOG is getting executed and updating the data base tables after the above badi got executed. can i use this FM ,RH_BASE_UPDATE_DB_DIALOG directly to delete the responsibility?I think it is not recomended.
    can any one give me some idea.

    Hi. You can use transaction PP01 instead of PPOMA_BBP.
    You might have to make some settings in table T777I to allow the responsibility to be maintained from PP01, but it it a lot faster than PPOMA_BBP, and you could use an ECATT or call transaction on PP01.
    You can also delete all the infotype using PP01, basically delete all the responsibility in 1 go if that is any use? Try all this in a test system first toget used to it though.
    Regards,
    Dave.

  • Is there any way to clear/delete the diagnostics and usage data on an iPad Mini?

    I'm trying to download an app and it was about 1.28 GB. I did not have enough storage to download it, so I was wondering if there was any way to delete them from my iPad to save some storage.

    I have always deleeted itunes downloads (mostly tv shows) from this location:
    Settings>General>Usage>Storage
    Since the OS upgrade the video section there says "no data".  Now I am getting the message that new vidoes can not be downloaded due to lack of storage. I can't figure out how to delete the videos I no longer want on my iPad mini.  I have them in my Purchased list.  I can download them (when I have space) and watch them, but I can't find any way to delete downloaded ones any more.  Thanks.  nf

  • Is there any Impact if we change the Valuation Grouping code.

    We have 2 valuation grouping codes
    0001 For US plant and 0002 for Europe
    For 0001 GR/IR clearing is 200000
    For 0002 GR/IR clearing is 200001
    We have 2071 plant is there it is assigned only for company code 430.
    It is belongs to Europe plant. But they are assigned to 0001valuation grouping code.
    Now they want to change the valuation grouping code for CC 430 from 0001 to 0002.
    I have verified in OBYC transaction for 0001 and 0002 all the valuation classes and GL accounts are same, exepet GR/IR clearing account.
    After changing the grouping code it will change the GR/IR account for CC430.
    If you need more information please let me know.
    Thanks
    Ravi

    not answered

  • Is there any way i can delete the U2 album that was given away for free completely off my phone?

    i do not want the U2 album on my phone and i cannot find a way to delete it

    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/offerOptOut

  • I deleted emails from VIPs and didn't realise they would be deleted from my Mailbox. VIPs does't appear in Mail on Time Machine. Is there any way I can restore the deleted emails?

    I deleted emails from VIPs in Apple Mail and didn't realise they would be deleted from my Mailbox. I have tried to restore from Time Machine but VIPs doesn't appear. Is there any way I can retrieve the deleted emails? I also have bachups on an external hard drive.
    I have OS X 10.9.2

    You can't download pictures from iCloud by logging into icloud.com.  If you deleted pictures from camera roll AND photo stream, the only possibility is preforming a restore from an iCloud backup, assuming the backup has the pictures in it.  (Many users have been unable to restore and get back their pictures.)
    If the restore doesn't have all the pictures, then they are gone.
    In the future, use photo stream to sync photos from an iPhone to a computer, then copy the photos on the computer from the photo stream album into a permanent album.  Photo stream pics stay there only for 30 days, and only up to 1000 photos are stored.  Don't use photo stream as a storage medium, it's only for copying photos from one device to another.  Always copy (either via USB cable or photo stream) to a computer and then move to an album.

  • Is there any way to actually delete messages from my iPhone? I have already synced my iPhone, updated it, and deleted all of my backups but the messages I have "deleted" still appear in the spotlight search.

    Is there any way to actually delete messages from my iPhone? I have already synced my iPhone, updated it, and deleted all of my backups but the messages I have "deleted" still appear in the spotlight search.

    If you already have an iPhone backup or an iCloud backup, just follow the instructions on the page below
    http://www.whatsapp.com/faq/en/iphone/20888066
    If you didn't back up your iPhone, try to use WhatsApp Pocket to recover your chats:
    http://www.fireebok.com/whatsapp-pocket.html

  • I connected a digital camera memory chip with approximately 100 photos on it. The photos showed up in iPhoto. I believe I deleted the photos from the memory chip before importing them. Is there any way I can get the photos back?

    I connected a digital camera memory chip with approximately 100 photos on it to import into iPhoto. The photos showed up in iPhoto. I believe I deleted the photos from the memory chip before importing them to iPhoto. Is there any way I can get the photos back?

    Terence, thanks that site is a gem...have to explore it more fully at home as it drove security here crazy
    Looks like just the ticket for saving mistakes.

  • Is there any impact on database if we change the time of server?

    Hi,
    Our DB server time is 45 minutes ahead of our application server. We have planned to reset the time of database server. Is there any impact on database if we change the timing of the server?
    Platform: Solaris
    DB version: 10.2.0.2.0
    $ bash
    bash-3.00$ date
    Thu Apr 23 20:26:19 IST 2009
    bash-3.00$ sqlplus /nolog
    SQL*Plus: Release 10.2.0.2.0 - Production on Thu Apr 23 20:27:15 2009
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    SQL> conn /as sysdba
    Connected.
    SQL> select sysdate from dual;
    SYSDATE
    23-APR-09
    SQL> select systimestamp from dual;
    SYSTIMESTAMP
    23-APR-09 08.27.53.250947 PM +05:30

    That's an application question, not an Oracle question.
    Oracle doesn't care what time it is or when the time changes. Your application(s), however, may care. If you use SYSDATE to populate a row and rely on the date later to be unique or to indicate the actual order rows were inserted, changing the date on the server, particular moving it backwards, might cause problems for your application. Does your application have problems running during daylight savings time changes?
    Justin

  • My ipad2 freezes when i try to delete a email that has a 78mb pdf attached. Is there any other way to delete this file other than through the email program?

    My ipad2 freezes when i try to delete a email that has a 78mb pdf file attatched. Is there any other way to delete this file other than the email program?

    If it's not MobileMe, use Safari to access the server directly and delet from there. If it is MobileMe, do the same thing but from your computer as the iPad Safari won't connect to MobileMe mail.

  • I have photos on my iPad that I want to delete. This is my problem. I synced them from my ex-husband's Mac. We are no longer together therefore I don't have access to his computer or iTunes account. Is there any other way to delete them?

    I have photos on my iPad that I want to delete. The problem is I don't have access to the computer used to sync them. It was my ex husbands computer and iTunes account. Is there any other way to delete them?

    Not sure is any of these methods will work.
    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • Upgrade SAP R/3 system is there any impact in BW3.5 system

    Hi,
    Client need to upgrade ECC5.0 to Ecc6.0.No changes in BW3.5 side.
    Now is there any impact in BW.If impact what are all the impacts of your experiance.This is very urgent Could you please respond immediatly.
    How to test the BW system.
    Please do the needful for me...
    Thanks to all
    Vasu

    Hi,
    I would like to ask you to refer the note mentioned in the below Link;
    Re: Hi Gurus..
    With rgds,
    Anil Kumar Sharma .P

  • Is there any impact that apply Oracle CPU on standby and primary DB

    We plan to apply Oracle April CPU on standby DB at this weekend. Then apply the same patch on primary DB next weekend. If I apply the patch on standby, then enable redo apply between primary and standby, is there any impact on primary DB. Theoretically, I don't think so. However, both DBs are production. I want to make sure there is no any impact by applying CPU in different time. Otherwise, I have to apply both DBs at the same time. Please advise. Thanks in advance.

    853153 wrote:
    I hope you read other people's post carefully. Don't pretend yourself is expert so that you can say whatever you want to say. This is the tech forum for Oracle technical people to ask question, seek help and so on. How do you know I didn't review document 278641.1 before I asked my question. Document 278641.1 only provide info on how to apply patch on primary and standby. Didn't say anything about applying the same patch on both DBs with data Guard at the different time. I just want to make sure If I apply patch on both DBs with one week difference, will this affect my primary database? Is there anything wrong here. If you paly in this forum as expert, please help people, not just look down people.
    I suggest you review [url http://www.catb.org/~esr/faqs/smart-questions.html]How To Ask Questions The Smart Way.
    When you ask for help, state the platform, operating system, Oracle version and patch level, no matter whether it seems important to the question or not. It most often is important. You may not know the difference between Itanium and PA-RISC, but that is important for Oracle and important for someone doing administrative work on an Oracle database to know. You should also learn to search the internet for answers to common questions. Everyone here wants to help, but few want to spoon-feed.
    When you have any kind of standby, that constrains what you can do to a primary, if you want the standby to work properly. You need to understand how things get from one to the other, and how to decide when to simply rebuild the standby from scratch - and that decision is based on your configuration and requirements. You don't want to be in some undefined configuration for any period of time.

Maybe you are looking for

  • When i browse to a webpage firefox freezes then (not responding)

    I turn on firefox and everythign seems alright, but once i click on the URL blank and type something in when it tries to load the page, it hangs,freezes, then eventually says "Not Responding" and at that point i have to End the process. This hasn't b

  • Its something related to T-Code F-26

    Hello Experts , From the main F-26 screen , when we navigate to the screen with the description as 'Incoming Payments Fast Entry Process open items' i.e. probably the 3rd screen in the sequence then I have a requirement of doing some validations when

  • Installing APEX (first timer)

    Hi, From http://www.oracle.com/technology/products/database/application_express/download.html, I downloaded the file "Oracle Application Express 3.2.1" upon unzipping it does not seem to have any executable file. All I could find are various text fil

  • Getting public ip address for a lan

    hello is their a way to some how retrieve the public ip address of a lan? When i use the standard java get host method from a pc that's in a lan, all i get is the private lan ip address such has 192.x.x.x. this is useless to me if i want to make a co

  • 802.1x configuration for 3500 switch and 2800 switc

    Can anyone point me to a document on how to do a 3500 switch 802.1x configuration as well as a 2800 switch? How do you define the server auth-port? Thanks