Is there any Index Cards in iFS

I am new to this iFS and have been looking everywhere to see if there is such a thing as Indexing cards so that the files can be further indexed and thus searched. Is there any such thing for iFS? I can not find any...
thanks
null

It is very easy to extend the Internet File System with custom file attributes. This can be done using the ifsmgr tool, which features a friendly graphic user interface.
As part of the creation process, you can choose to index an attribute using the isIndexed checkbox.
If you've installed with the interMedia text option set to run, the body text of any document you insert to the Internet File System will be indexed for full text search.

Similar Messages

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

Is There any Java Card 2.2.x Training in Asia?

Hi friends..
Please tell me, is there any Java Card 2.2.x training in Asia, which involve from Basic to Advance..
Thanks in advance..

There is a 4 day JCOP training in Shanghai and Singapore end of April. A whole day is about Java Card specifically.

Is there any sd card reader for iPod touch 5 ?

Is there any SD card readers for iPod touch 5 ?

There is not such adopter for an iPod. One for an iPad. However, there are wifi card readers like:
http://www.amazon.com/RAVPower%C2%AE-FileHub-Wireless-3000mAh-Battery/dp/B00AQUM ZRA

Are there any PC cards which have sample and hold capability

Are there any PC A/D cards which have sample and hold capabilities up to a 10 Khz sampling rate which we are interested in for modal testing of engine structures. Also if this type of card is available what would be the maximum input channel count of this card. We would be interested in the highest count available up to 64 channels.
A second question: We currently have a 64 channel PCI 6071 capable of 1.25 MS/s throughput. If we are using all 64 channels what would be the interchannel delay between the first and last recorded channel and at what frequency would we have to be sampling to even be able to see the affect of the interchannel delay of this specific card.
This issue has been debated wi
th in our group and your insight would be appreciated as you are the experts in this field.

Dear Sir,
Thank you for using NI Developer Zone.
National Instruments has a product line designed specifically for acquisition of dynamic signals, it is called DSA - Dynamic Signal Analyzers. In according to the description of your application the card that best fits your needs is the NI-4472 that is available in PCI and PXI format. This card is able to acquire 8 channels simultaneously, as opposed to the regular DAQ cards that have a single A/D converter and a multiplexer. The NI-4472 has 8 Delta-Sigma A/D converters one per channel, what results in a better performance than having a single A/D converter in combination with a sample and hold and a multiplexer. To Acquire 64 channels you would have to have 8 boards and synchronize all 64 channels. The Synchronization process is very simple and with a couple of software calls we can synchronize as many as 112 channels for simultaneous acquisition at 102.4K samples per second per channel.
Regarding your second question, the PCI-6071 will sample between channels in a single scan at the maximum sample rate of the board (1.25 MS/s) but the
scan rate, i.e. the rate in which the same channel is sampled is defined by the user. Being that said, we can conclude that the interchannel delay will be the inverse of the 1.25 MS/s clock, or 0.8 micro seconds.
For a 1 KHz sine waveform, this represent a phase delay of 0.288 degrees between consecutive channels. For a channel list of 64 channels each one having the same 1 kHz sine waveform, the phase delay between the first and the last waveform will be 18.432 degrees.
I really recommend the NI-4472 as a very good solution for your application, besides that the combination of the NI-4472 with LabVIEW and the sound and vibration toolset will give you a tremendous tool to solve not only your immediate need but also provide you a system that will be easily modified and adapted for future needs.
If you need more info, feel free to contact me and I can give you more details about this product.
Call 1 800 IEEE488 and ask to speak with the Computer Based Instruments (CBI) support team.
Best Regards.
Omar De Andrade
Applications Engineer - Computer Based Instruments
http://www.ni.com/support/

Are there any sound cards with best driver support for Arch?

I was wondering if there are any sound cards that have the best driver support for ArchLinux? I currently own a Creative Labs X-FI Platinum Edition. The main reason I like the Platinum is that has an interface you can plug MIDI and Audio ports into. It seems to me, however, that Creative is the worst company to support Linux drivers. If anyone has any opinions, please feel free to comment. According to all my research, ALSA sound drivers are the most supportive for sound. Am I also correct in this assumption?

yeah, creative sucks. go with m-audio. they support linux unlike creative.

Is there any thunderbolt card available for mac pro?

I have a blackmagic intensity extreme, which has thunderbolt port. But I am unable to use it with Mac Pro as there is no thunderbolt port on it. Any suggestions?
Thanks!

5kFilmGuy wrote:
Here's a clue at a Thunderbolt PCIe card that may be available for cpu's with an open 16x slot.
HP is now offering a Thunderbolt option for thier Z820 workstation model.
Actually, no. That computer was designed for thunderbolt from the start. It is a feature enabler card, not an expansion card.
I hope this will change soon, but not soon enough to hold my breath.
There will never be a thunderbolt card for Mac Pros.
Two reasons:
1- Even the 2012 Mac pro used 2 year old hardware, that means even the very last Mac Pro Apple sold last month used 3 year old technology. Its not economical to make new hardware for old technology in a very small market.
2- Thunderbolt communicates directly with the CPU, GPU and PCIe hardware. That means they have to be designed to communicate with the thunderbolt controller. Since thunderbolt was introduced in 2011, a full year after the last Mac Pro (5,1) was designed, its hardware has no possible way to communicate with it.
Thunderbolt is not "an extension of the PCIe bus" like eSATA is an extension of SATA, its an entirely different communication protocol.
If it were just an extension, it would be far cheaper and easier to implement and there would be more than just a handful of products on the market that support it. Right now thunderbolt is making Firewire look like a runaway success!

Are there any SB cards that still use MME / WDM drivers?

That's what I need to know;
the company I contract for is replacing the audio recording PC and will need a sound card that's MME / WDM compliant?
I have a recording PC in my home studio and it has an ASIO card (E-MU 0404 PCI)
and I have to do retakes due to major drop outs about 20% - 25% of the time
even after setting it up for recording and changing the process priority of the card drivers & services
but the old P4 that the company has is using an SB-Li've and I've never seen it drop out once in the last 5 years of recording.
I've been given the task of researching the components needed to build the PC from the ground up.
?any helpful info would be appreciated.

Hi Plowboy and welcome to the BlackBerry Support Community Forums!
Unfortunately RIM does not have any drivers supported by Windows 98.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Is there any circuit card in a SCXI series for reading a PWM signal?

The signal specification is ...
"The signal is a differential 28 volt pulsed signal at a frequency between 160 Hz. and 200 Hz. and with a variable duty cycle. The signal is capable of driving a solenoid with a resistive load of 10 to 20 ohms and an inductive load of 25 - 51 mH. The average current of this signal will be pulsed width controlled. The average current drive capability will be a minimum of 0.8 A and will provide current limit protection against a short circuit."

Orlan,
At this moment we don't have an SCXI module with these characteristics, but it would be a good idea to take a look at the Dynamic Signal Analyzer Boards (NI 4551 and NI 4552). They both can read signals in the range of +/-10mV to +/-42.4V with a 16 bit resolution and Sampling Rate of 204.8KS/s.
For more information on these boards, you can go to page 296 of the NI 2001 Catalog, or you can go to www.ni.com/catalog and make a search for "4552" or "4551".
Good luck with your application!

Is there any PXI oscilloscope card, with sampling rate 1Gs/s or higher

Hi all
In my test lab, I am using TDS684B oscilloscope. Is there any PXI card which can perform the same function as TDS684B? I searched the NI catalogue and they don�t have 1Gs/s sampling rate scope. Is there any other vendor for PXI and may be they might have. Please give me suggestion?
Many thanks.
Saw

I would say that Acqiris is worth a look. They have very good software support for their hardware. One can actually simulate hardware using they software while debugging at home or consulting. I have also used Gage and that product was pretty pathetic in terms of software support and hardware flexibility (it was 4yrs ago so perhaps that has changed)
Reinis Kanders

Are there any JCOP functionality to measure performance within card ?

Hello,
We are trying to measure some functions performances. Bu we dont have any specific tool for that.
We made some tests with PC applications, but it is not precise(as you know there are some scard library delays).
Is there any internal card(jcop) functionality to estimate the time interval for our card functionalities, or do you you have any other suggestions ?
Thank you in advance.

Hi,
Given a card does not have a real time clock it is not really aware of time in this way and adding a measurement would affect the performance as well (note there is some timing in the crypto chip to help protect against certain attacks, but this is not exposed to the JC API).
The best you can do it measure the time before and after transmitting an APDU at the lowest level possible. It is safe enough to assume that the PC/SC overhead is going to be consistent for the same amount of data. You could even benchmark just sending data to the card without doing anything with it to measure the time for transmitting your data. This is not generally needed as you are interested in the performance as perceived by a client application or a user and this transmission overhead is a part of that as well.
Just my $0.02 anyway.
Cheers,
Shane

Is there any performance difference in the order of columns referencing index?

I wish to find out if there is any performance difference or efficiency in specifying those columns referencing index(es) first in the WHERE clause of SQL statements. That is, whether the order of columns referencing the index is important???.
E.g. id is the column that is indexed
SELECT * FROM a where a.id='1' and a.name='John';
SELECT * FROM a where a.name='John' and a.id='1';
Is there any differences in terms of efficiency of the 2 statements??
Please advise. Thanks.

There is no difference between the two statements under either the RBO or the CBO.
sql>create table a as select * from all_objects;
Table created.
sql>create index a_index on a(object_id);
Index created.
sql>analyze table a compute statistics;
Table analyzed.
sql>select count(*)
2    from a
3   where object_id = 1
4     and object_name = 'x';
COUNT(*)
        0
1 row selected.
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=1 Card=1 Bytes=29)
   1    0   SORT (AGGREGATE)
   2    1     TABLE ACCESS (BY INDEX ROWID) OF 'A' (Cost=1 Card=1 Bytes=29)
   3    2       INDEX (RANGE SCAN) OF 'A_INDEX' (NON-UNIQUE) (Cost=1 Card=1)
sql>select count(*)
2    from a
3   where object_name = 'x'
4     and object_id = 1;
COUNT(*)
        0
1 row selected.
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=1 Card=1 Bytes=29)
   1    0   SORT (AGGREGATE)
   2    1     TABLE ACCESS (BY INDEX ROWID) OF 'A' (Cost=1 Card=1 Bytes=29)
   3    2       INDEX (RANGE SCAN) OF 'A_INDEX' (NON-UNIQUE) (Cost=1 Card=1)

HT1918 Is there any way to remove my credit card from my account?

I keep getting the "The credit card was declined." Message. I want to update apps that I have previously purchased but am unable thanks to this. Is there any way that I can remove the credit card?

From your Itunes go to ( top left) click Store tab / view account / enter your account mail and password.
A window will show your ( Apple ID summary ) Go in payment information and you casn edit it from there.
Ben

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

I have an American Itunes account, but now I live in Japan. I want to download Japanese artists to my I-tunes, but it won't let me. Is there any way to move past this? My American I-Pod and it is connected with an American credit card.

I have both an i-Phone 4 and a classic i-Pod. I want to download Japanese music on I-Tunes, but it won't let me because they I have an American account. I cannot get a Japanese credit card because I am a foreigner, I would still like to use my American card.
Is there any way to get Japanese artists and songs, without deleting my I-Tunes account for America?
Thank you,
Serita

To Change the country iTunes store click on the flag at the bottom and click on the flag for your country.

Is there any Index Cards in iFS

Similar Messages

Maybe you are looking for