Is there any J2MEsource code on Samsung S100/200/300 available ?

I'm a beginner, I am trying to design J2ME programs on Samsung S100/200/300. But the emulator for Samsung S100/200/300 could not run the my j2me programs, even the demo of J2ME Wireless Toolkit could not either. So, I am searching for a copy of J2ME source code on Samsung S100/200/300. Is there any one know how can I get it?
My English isn't well, Thank you very much!

i have developed one j2me aplication to run on samsung emulator. It is working fine. i have downloaed one samsung emulator for sgh-s300 model.
as u experienced it wont run in wtk.
if u want i can send u the url from which i downloaded.
for easier and faster communication better u send me your email ID.
hope it is [email protected]
regards

Similar Messages

How to do advance payment against PO for this is there any T.code

Hello,
Lt's say for ex: Once Po is created how to pay the advance payment against PO to the vendor, for that is there any transaction code.
Once advance payment is made against PO, again system should not allow for ammendement
So like this to control the system what are the configuration settings need to be done please explain
Early action in this matter will be highly appreciated.

Hi,
Apply the user exit : EXIT_SAPMM06E_016
Following Logic can be use:
1. Validate the company code (BUKRS ) & Purchasing document type (BSTYP = F) from EKKO table for the Purchase order number (EBELN).
2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is any down payment document exists (VGABE = 4)
3. If we find down payment doc in EKBE table then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
Step 1: Validate Company code and Purchasing Document type from EKKO table
Step 2: Check the Purchasing document history from EKBE table
Step 3: Check whether any down payment exists.
Step 4: Display popup message to user:
Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CPo cannot be changed, Down payment already exists for this PO item u201D.
Edited by: redriver on Nov 27, 2011 10:06 AM

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

Is there any t-code in which the List of Customers Display?

Hi SDN,
Is there any t-code in which the List of Customers Display?
Like the MKVZ, this is the t-code for List of Vendors Display.
Thanks,
Sumit.

Hi,
Following tcodes are related to List of customers.
MER5                   List of Customer Rebate Arrangements
RBPCT                  List of Customer Contacts
SWU5                   Consistency Test for Customer Task
S_ALR_87009951         List of Customer Open Items
S_ALR_87009952         List of Customer Open Items
S_ALR_87009958         List of Customer Addresses
S_ALR_87009963         List of Customer Open Items
S_ALR_87009975         List of Customer Line Items
S_ALR_87009976         List of Cleared Customer Items
S_ALR_87012173         List of Customer Open Items
S_ALR_87012174         List of Customer Open Items
S_ALR_87012180         List of customer addresses
S_ALR_87012185         List of Customer Open Items
S_ALR_87012197         List of Customer Line Items
S_ALR_87012198         List of Cleared Customer Items
S_ALR_87015021         List of Customer Open Items with Ren
VC/1                   List of Customers
VXBC                   SLS: List of Blocked Customers
Thanks,
RKP

Is there any t code in SAP to display archived shipping

Hi All
we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
for archived billing documents once thay are unzipped , document will not open in vf03 but we can display in vf07
Please let us know how to view this shipping data in sap ?
Is there any t code in SAP to display archived shipping data (like for archived billing dicuments vf07)
Your kind help would be highly appreciated.
Thank you
Rajendra Prasad

Hi Rajendra,
Whats your SAP version? VT03n supports display of archived data from 4.7onwards. If you are in a lower version then i think you should use infostructures.
Thanks,
Naveen

Is there any t code in SAP to display archived shipping data

Hi All
we have a issue with unarchiving shipping doc , our basis team has unzipped the file from the path it was archived and provided display access , when i cross checks in Tcode SARI theya are un zipped and in sap this document is still in status archived i am not able to view vith vt03n
for archived billing documents once thay are unzipped , document will not open in vf03 but we can display in vf07
Please let us know how to view this shipping data in sap ?
Is there any t code in SAP to display archived shipping data (like for archived billing dicuments vf07)
Your kind help would be highly appreciated.
Thank you
Rajendra Prasad

Hello,
Once shipment document is archived then you can't display by VT03N transaction. As you have pointed out SARI or SARE transaction will help in displaying the archived shipment documents from archive server. (you have to select Archiving object = SD_VTTK and Archive Infosturcture = Select from display option).
VF07 - Display archived billing document. We call this transaction VF07 as archived enable transaction.
I have gone through the OSS note 590656 mentioned by Eduardo Hinojosa, with this enanchment of VT03N (respective program) you should be able to display archived shipment document. This Oss note should help you.
let me know if required further clarification on this.
-Thanks,
Ajay
Edited by: Ajay Kumar on Aug 25, 2009 6:16 AM

Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

Experts,
Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
Thanks in advance
Krish

Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

Is there Any T-code similar to

Hi All,
Is there any T-code similar to WPER tcode
We use WPER Tcode in Retail area to see the Inbound & Outbound Idoc Processing Errors or success messages
Is there any other Tcode which is having similar work capabilty
Regards
Suman

Hello ,
Check this Link,
http://www.techhairball.com/concepts/SAP_Retail_Transactions_List.htm
*****Reward points,if found useful

Is there any T-code in which we edit the name of our company?

Is there any T-code in which we edit the name of our company?
Actually what a prob. is i made a smartforms in which i pick the name of may comany but its too long so i want to edit my company name so that the databse pick the name & its shown in the form.
The table is ADRC in which the company name is shown.
Thanks,
Sumit.

Hi,
you want to display VARDHMAN POLYTEX LTD-Unit 2 Expansion as VPL- Unit 2 Expansion. in output.
For every Adress number you have option of NAME1 and NAME2.
NAME1 : VARDHMAN POLYTEX LTD-Unit 2 Expansion
NAME2 : VPL- Unit 2 Expansion.
If you are taking company code name in your samrtform. Ask your functional consultant to maintain NAME2 in company code address.
T.code for company code OX02.
Regards,
Chandra
Edited by: chandra sekhar S on Oct 8, 2008 1:18 PM

Is there any transaction code for Report Designer,Query Designer and WAD

HI Gurus,
please tell me s there any transaction code for
1 Report Designer
2 Query Designer
3 WAD
Thanks in advance
Prashant

Hi Prashant,
We don't have any Transaction Codes for these.
Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
You have to use only .
Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
Hope it helps.
Reward with points if helpful.
Regards
Hemant Khemani
Edited by: Hemant Khemani on May 16, 2008 5:39 PM

Is there any t.code for getting list of deliveries not yet invoiced?

Hi,
Is there any t.code or report where we can get the list of outbound deliveries not yet invoiced, and also the value for how much it will be invoiced.
For example, I have one order with net price as 100, and it has outbound delivery created and not yet invoiced. I want a list of those deliveries with the net price of the quantity delivered.
Do anybody have any idea on this ?
Thanks
Surya

Hi All,
In VF04 and VL06F we will get list of outbound deliveries, but I want the information in such a way that if that delivery is invoiced for how much value it will be invoiced? so, the list should contain the delivery number the value for how much the invoice will be created.
Thanks
Chandramouli

I am developing a flex web application which needs to access Other domain ,is there any other way other than cross domain policy available ? please help

i am developing a flex web application which needs to access Other domain (Payment Gateway API),is there any other way other than cross domain policy available ? please help.
we donot have access other domain thats why we want other solution..

All the paths to CFCs are the same in my live production site. Can you be more specific as to what you mean by "RemoteClass aliases in your AS Classes and CFCs (if any) are correct."? How will the app know that the CFC is on http://myLiveSite.com instead of http://myDevSite.com? The only line of code that I have noticed that points to a URL is the endpoint in a file called _Super_XXX.as. And at the top of that file it says that the file is not meant for editting.
To clarify...I see your app/code all exists on a server access via a web browser so I can understand that everything still works when deployed. Mine is a mobile app so when I am developing and testing on my local computer the URL points to my local development machine. However when I deploy it to a mobile device like a tablet and run the app, it needs to be able to access a cfc on a remote server via a different URL ie. my http://myLiveSite.com/myCFC.cfc instead of http://localhost/myCFC.cfc
Thanks for your help! I will now take a look at your thread.
Message was edited by: ace0215

Is there any final cut express 4.0.1 update available?

Is there any final cut express 4.0.1 update available? I want a RELIABLE source to update this, preferably by APPLE, Inc.
I'm VERY disappointed that APPLE does not have that on the website. I SUPPORTED you by buying a product and in return you do NOT have a place for us to install upgrades especially if consumers like me got a new laptop. That is just plain MEAN. I mean, REALLY.
Thank you and I hope to get this as soon as possible.

Final Cut Express was discontinued 3 years ago (June 2011). It was replaced by Final Cut Pro X.
FCE is no longer supported by Apple. That does not mean it won't run on Lion, Mt. Lion, Mavericks or Yosemite, however with each successive upgrade to OS X it becomes less & less likely that FCE will be installable or even run properly after being installed, because it is so much older than the current versions of OS X. That said, the FCE 4.0.1 update is still available through Software Update provided you already have FCE 4.0 installed on your Mac. The 4.0.1 update is not available "publicly," meaning you can't search for it on Apple's website and find it; FCE 4.0 has to already be installed on your Mac and you have to update it via Software Update on your Mac.
One forum contributor DID find a way to download the 4.0.1 update without using Software Update, see this thread -> Where can I download Final Cut Express 4.0.1?
My advice is to move to Final Cut Pro X since you have a Mac running Mavericks (10.9.5).
I understand your frustration at having purchased some software and now you can no longer use it. However, obsolescence is a natural part of the technology world. FCE is now obsolete and has been replaced by Final Cut Pro X. If you have OS X Lion or any later version of OS X installed on your Mac, you should be looking at Final Cut Pro X.

Is there any t-code to upload Asset Balances other than OASV

Hello Genius,
Is there any other T-code to upload Asset Balances other than OASV.
Please guide me in detail
Regards
JS

if you ahve uploaded assets with AS91 then it would ahve already posted to the Asset accouting sub ledger, but not to the GL. So you ahve to use OASV to post to the GL.
Posting using ABSO will post to both the AA and the GL resulting in duplicate entry in the Asset accoutning
you can use ABSO only when creating the asset master with AS01.

Is There Any Secret Code?

Hi all,
I've recently heard that there are codes that can make voice calls cheaper, or even at no-cost. I wonder if there exist any, & what are those codes (specially for N70),& Why did the company put such codes on the phones?

Leave well alone. I've heard of this sort of thing before. It's a hoax and a way of getting your mobile phone details and using them. All you end up with is a very large bill for calls you didn't make. As others have said previously if this was possible we would all be doing itNo there exist such code for atleast the nokia n80 phones
For soft reset (that don't erase u r data) code
*#7780#+passord(Default is 12345 for nokia)
(e.g. *#7780#12345 )
For hard reset (that erase u r data) code
*#7370#+passord(i.e. Default is 12345 for nokia)
(e.g. *#7370#12345 )
use this code on ur own risk
i am not responsible for any damage done due to this codes.
But, these code does exist thats why i have given u these code.

Is there any J2MEsource code on Samsung S100/200/300 available ?

Similar Messages

Maybe you are looking for