Is there any Negative Marking in 70-511 Exam

HI,
Please let me know is there any negative marking in this exam. I am lit bit of confuse in this.

Scoring
Here is some general information about exam scoring:
There is no penalty for guessing. If you choose an incorrect answer, you simply do not earn a point for that item. No points are deducted for incorrect answers. This is subject to change as Microsoft continues to introduce new and innovative question types.
If a question specifies that you must choose multiple correct answers, you must choose all of the correct answers in order to earn a point for that item. This is subject to change as Microsoft continues to introduce new and innovative question types.
Some questions on the exam may not be included in the calculation of your score. To gather data to update and improve the quality of each exam, we present new content to candidates without counting the results toward their score. However, as soon as we
have the necessary data to evaluate the quality of the question, it will be scored. Microsoft will not inform candidates as to which questions are unscored; as a result, you should answer every question as if it will be scored.
More information can be found here:
http://www.microsoft.com/learning/en-us/certification-exam-policies.aspx#scoring_and_results
Good luck!
Best wishes, Davin Mickelson

Similar Messages

Is there any negative in this workflow?

I am trying to keep my encoded files as small as possible for streaming so I have begun using this workflow, Any cons? I shoot in 720p 60 (59.94) then edit in ProRes, but I change my frame rate in the sequence to 29.97. It looks good, but are there any negatives in this? I then export to ProRes LT which makes the file even smaller. Any negatives here? Will this make my encode time longer since I am going to ProRes LT?
Any input will be greatly appreciated as usual.
Cheers.
Tom

I'm guessing that you don't have a 29.97fps option at the 720 size…otherwise, the main reasons to shoot 59.94 are either for slow motion or because you're shooting action scenes and you (and your viewers) think it looks better with that material.
But to your questions, if the speed change looks good to your audience when streaming, then that's the only test that counts. And PR LT seems like a perfectly reasonable choice for a lot of things…but are you going to PR LT and then to H.264 for the Web? I guess that seems like an unecessary additional step to me with no great value except a slightly smaller master file – and yes, some extra encoding time.
Good luck.
Russ

On a good screen is there ANY negative black effect?

My iPhone is a replacement refurbished unit. Since my replacement, I am experiencing negative black effect and dead spot. Few weeks ago, I called Apple care and after explaining the problem, they sent me a loaner and shipped mine to Apple center for repair. The loaner was superb, enjoyed it without any negative effect or dead spot at all, and had for a week until my original unit came back. All excited, open the box and look at service report, nothing was done to the unit and indication was they couldn’t reproduce the problem so they sent the unit back to me without any repair with the same old issues.
So I called apple care again and told them the loaner I have is extremely brighter, better, than my original one and I could see the difference and the problem with the negative effect so, they transferred me to product specialist and after talking to product specialist it was like I came from planet Naboo that I have no idea what I am talking about, even when I was indicating to her that there are two different screen version 5 and 7 with the loaner being 5 and mine original 7. She asked me, “How do I know?” Told her, well dialing the diagnostic sequence on the iPhone *300… All and all she said NO, there is no difference between two products and I hanged up and went with my business and only using the my iPhone without the video because at the end of the day I am the unlucky one out of the 1.2 M iPhone units sold. Hummm. I wonder who is the lucky one now has the loaner unit for one week.

Use the Settings app.
Settings > General > Passcode Lock > Enter the Passcode > Turn Off Passcode

Is there any negative in changing an external hard drive from FAT32 to NFTS?

I have a 500 GB external hard drive,
Western Digital, that is formatted as FAT32. I have tried to save some movie files in Moviemak
er from the External file to a file in a second internal hard drive so I can then edit in Premier but it says there isn't enough
space. The new internal hard drive is a Terabyte and has lots of space. The C drive is almost full. I want to reformat the external drive to NTFS. Is there any downside to that?
My PC has XP pro, 4 G Ram. My problems come from trying to convert files because of missing codecs. Yet when I analyze them with Gspot- it says nothing is missing.
Thanks
Pam

Pam,
What you actually want to do is Convert. The term "format" is used, when referring to FAT-32 and NTSF, but the operations are different. Convert should NOT harm the drive, or losse any data. I have done this with dozens of externals, without any incident. However, I have to admit that most of these are brand new, with no real data - so I am less concerned. When I have Converted older drives, I have made a backup - just in case, but still have never had one issue, or even one lost, or damaged file.
This ARTICLE goes into more detail. Also, please check your particular OS version's Help Files. That article was done a few OS versions ago, and there could be small, but important changes, especially in the parameters.
Good luck,
Hunt

Is there any negative impact disabling view merging?

Hi
To fix an ORA error, it was suggested to set :
simpleview_merging=FALSE
complexview_merging=FALSE
bug is still on Development and customer wants to know the impact,implications of
disabling view merging and if there is any way to identify queries that currently does
simple and/or complex view merging.
For the second one, I guess the answer is no, I just want double check.
Oracle version: 11.2.0.1
Thanks,
Deyanira

Doing system-wide change is always a big challenge.
Since you know what queries are affected by the bug, why don’t you set those parameters for those queries only.
alter session set "_simple_view_merging"=FALSE ;
Buggy query…
alter session set "_simple_view_merging"=TRUE ;You can play with OPT_PARAM hint, but I do not think it is documented hint.
Iordan Iotzov
http://iiotzov.wordpress.com/
Edited by: Iordan Iotzov on Dec 6, 2011 12:42 PM

Are there any negatives for turning on fire vault?

Hi, want to know if turning on fire vault will alter any functionality or retrieval problems? Or will it make no effect other than improved safety?

When you first turn it on your computer may slow down a bit until it is fully encrypted but after that there shouldn't be any problems.

Is there any negative impact if _newsort_enabled = FALSE?

Hi,
To fix an ORA-600 error, it was suggested to set newsortenabled = FALSE,
bug is still on Development and customer wants to know the impact,implications
of reverting to the old sorting algorithm from performance point of view.
Oracle version: 11.1.0.7
Thanks,
Deyanira

user704798 wrote:
To fix an ORA-600 error, it was suggested to set newsortenabled = FALSE,
bug is still on Development and customer wants to know the impact,implications
of reverting to the old sorting algorithm from performance point of view.
Oracle version: 11.1.0.7
The version 1 sort will use more memory and more CPU to do an in-memory sort.
It's hard to give much indication of the difference, but it will be related to the number of items sorted.
Regards
Jonathan Lewis

Solid State upgrade: any negative effects

I'm considering replacing my 120GB Solid State hard drive in MacBook Pro with a 500GB SS Drive. Are there any negative effects - for example on battery life, or in terms of overheating?

I've a 512GB Crucial m4 series SSD - and find that 512GB is plenty of room (of course, I do have a 2 TB 'working' external Thunderbolt drive, as well! Can't put everything on the 512GB!).
But I'm sure that one day there will be 1 TB SSDs - when that day comes, I may look at upgrading: if the price is right!
Clinton

Is there any way to determine if a link is a book mark or hyperlink in java script

Is there any way to determine if a link is a book mark or hyperlink in java script
Sub Problem:
I am making an array of quads of all the hyperlinks in a document. I would like to automatically skip over all the bookmarks in the starting pages of a document and just get the links of the hyperlinks.
Now I have to manually set the pages that contain bookmarks so they are not included in the array.
Is there any way to determine if a link is a book mark or hyperlink in java script?
It would help automate the conversion I need below
John
Main Problem:
I have been working on converting a set of pdf files with 1000’s of hyperlinks like www.site.com\folder1\file1.pdf#page=10
To jump to a local copy of the files with a relative type link
../folder1/file1.pdf and then go to the proper page.
I have found that it can be done manually by changing the hyperlink to a javascript
var otherDoc = app.openDoc('../folder1/file1.pdf', this);otherDoc.pageNum = 10 - 1;
and setting each destination file with a disclose()=true;
Based on the help so far that java script cannot access the hyperlink value in a link
See: http://forums.adobe.com/thread/1039908?tstart=60
I have resorted to the following plan using acrobat javascript, an external keyboard macro recorder and excel in combination to get around the problem
Four folder level acrobat javascripts with “buttons”
One to get all the link quads in an array, in the pdf and report the total number
The second creates a form field in the far corner of the first page and moves there.
The third jumps to each link found by creating a form field just to the left of the link and zooms in so it can be selected by a “mouse click” from the keyboard macro recorder
The forth deletes the form field
The keyboard macro recorder runs javascript 2 and then 3 then clicks on the link just to the right of the middle of the screen and uses keys to get to the advanced editing to get to edit the hyperlink .
The hyperlink is then copied to excel where it is converted using string functions to the needed javascript text to be copied back.
To the acrobat file into a java script (after deleting the hyperlink)
Rinse/lather/repeat
I have been able to convert about 150 links an hour.
Better then hand typing, but not like having java access to the links.
I am looking to improve the solution

thanks for your help.
I may have been confusing a "acrobat bookmark" and a bookmark in a word file that is converted to a pdf and ends up being a
link of the type:
"Go to a page in this document"
which I do not want in my array vs
a link of the action type:
"Open a web link"
Which I do want
John
My code, note how I have to skip pages with "Go to a page in this document" links depending on the document, I would like to use the same code for each document and skip over the "Go to a page in this document" links :
global.ilinkindex = 1;
global.aLinkquads = [ [0, 1, 1, 0, 0],
       [0, 0, 0, 0, 0] ];
function GetLinkArray()
global.ilinkindex = 1;
var iTotalLinks=0;
// for ( var p = 0; p < this.numPages - 8 ; p++)                   // end before bookmarks for each page of the file x.pdf
// for ( var p = 0; p < this.numPages; p++)                     // for each page of the file
for ( var p = 23; p < this.numPages; p++)                     // start after bookmarks for each page of the file y.pdf
var cropbox = this.getPageBox("Crop", p);
var alinksonpage = this.getLinks(p, cropbox);            // get array of links on page
for ( var ll = 0; ll < alinksonpage.length; ll++)
   var linkquads = alinksonpage[ll].rect;     // get link Quads
   linkquads[4] = p;          // add page number to link Quads array
    global.aLinkquads[global.ilinkindex] = linkquads; // add quads to global link Quads array
    global.ilinkindex++;
iTotalLinks = global.aLinkquads.length - 1;
global.ilinkindex = 1;
app.alert("Number of Links in Document is " + iTotalLinks );

Is there any way to mark messages forwarded by a rule with that little "forwarded" arrow?

Normally, after forwarding an email, a little arrows appears next to the message reminding me that the message was forwarded. However, when I set up a rule to forward messages, those little "forwarded" arrows don't show up. Why is this?
Is there any way to automatically mark a message as forwarded?

I have considered adding a flag as you suggested, but one of the things I really like about the "forwarded" arrow is that, when clicked, it shows me the forwarded message and to whom it was forwarded.
I've also noticed that the same rule, when I select "Apply Rule", does in fact mark those as forwarded with the arrow, but when I click those arrows, it can't find the message. And then, just like before, any new messages that I receive don't get marked. Just seems odd to me. Wish I didn't have to use the flag workaround.

Is there any way of syncing mail on mac with mail on iphone so if you open an email on one it is marked as read on the other?

The title speaks for itself. It's very anoying opening a message on the iphone and when you get to the mac all the messages you read allready on the iphone are not opened yet. Is there any way of syncing them so if you open a mail in iphone its marked 'read' in mac?
Thanks in advance

Such behavior requires an IMAP or Exchange account. Sounds like you have a POP account & that's the way that POP accounts work. POP was designed for an age when users had only one device...a computer, thus POP doesn't play well in the modern world where users have multiple devices.

Is there any tec support i can call?, all my output is in Question Marks "?"

is there any tec support i can call?, all my output is in Question Marks "?"

Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID? --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
Forgotten security questions - https://discussions.apple.com/message/18402551 and https://discussions.apple.com/message/18625296
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
John Galt's tips (09/2012) - https://discussions.apple.com/message/19809294
If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store.

Hi my names mark.I have the ipad 2 it's on ios 7.1 I had iOS 7.4 but it downgraded to iOS 7.1 is there any way I can upgrade to iOS 7.4 and the 3D effect is gone off my ipad

Hi my names mark.I have the ipad 2 it's on ios 7.1 I had iOS 7.4 but it downgraded to iOS 7.1 is there any way I can upgrade to iOS 7.4 and the 3D effect is gone off my ipad

There isn't an iOS 7.4 - there was a 7.0.4 (and 7.0.6), 7.1 is the current version.
For the parallax effect, do you currently have Settings > General > Accessibility > Reduce Motion set 'on' ?

How can I deal with negative marking in a quiz marking scheme?

I wonder if anyone can help me with a problem I have in developing the 'code' for a marking scheme for an exam in Captivate 8. I would be very grateful for pointers towards a viable solution. At the moment I am just thrashing around.
My background is in C++ and I think part of my problem is in trying to find analogues of functions I would use in that environment. My experience with Captivate is limited to developing fairly simple training courses but now I need to put an existing exam on line, maintaining its relatively complicated marking scheme, which is as follows:
The paper is multiple choice, each question having four statements, one (or at the most two) of which is true. A completely correct answer gets 4 marks so where there are two correct statements each gets 2 marks. So far, so easy.
The difficulty arises from an element of negative marking. If 3 or more statements are selected, the score is 0 marks. If there is a single correct statement and it and an incorrect statement are selected, the score is 2 marks. If there are 2 correct statements and one of them is selected, the score is 2 marks. If an incorrect statement is selected as well, the score is 1 mark.
I had assumed I could use conditional logic and user variables on a slide-by-slide basis to provide a score value and then assign it to the appropriate system quiz variable, but it seems I can't assign values to variables in a quiz slide. That would have been too easy...
So, can anybody advise me on an approach that keeps the advantages of using the quiz framework, including the use of the Review function?
Any help very gratefully received.

If you use SCORM 1.2 for reporting, negative scores will be converted to zero, because it doesn't allow negative score.
If you want to keep to Review functionality, you need to stay with the default question slides. There are some tweaking possibilities but changing the score is not one of them.
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog
I think the only possible way is to use JS, but then you'll not be able to keep the functionality of the Question slides, you are in custom question slides. Plenty of examples of custom questions can be found on my blog as well.

Is there any way to contact verizon with a detailed cell phone technical support question?

Is there any way to contact Verizon with a detailed cell phone technical support question? I prefer e-mail so as to provide details (like I am trying to provide here). I have tried in-store personnel (no help at all) and the web chat - they just want to see me more data instead of helping me with my basic problem!
I CAN NOT GET ANYONE FROM VERIZON TO GIVE ME ANY HELP NOR CAN I FIND A WAY TO FILE A COMPLAINT. AT THIS POINT I JUST WANT TO DROP MY VERIZON ACCOUNT BUT I'M SURE THAT IT WILL COST ME A SMALL FORTUNE TO GET OUT OF IT.
Here is my issue:
Chat transcript removed as required by the Verizon Wireless Terms of Service
BELOW IS A SCREEN COPY FROM REDDIT ABOUT SOMEONE WITH THE SAME PROBLEM WITH A VERIZON CELL PHONE
So last night my RAZR MAXX HD did something totally bewildering by spontaneously downloading 2.6 GB of data over the course of ~ 3 hours. Fortunately I was able to catch this problem before it ended up being really expensive, but I still exceeded my 2 GB data plan by 600MB.
The Culprits:
Reddit News Free: 160 MB foreground / 0.96 GB background
Android OS: 0 MB foreground / 1.18 GB background
Several unnamed applications: ~ 350 MB
Screenshots:
The massive data spike
Android OS data usage
Reddit News Free data usage
Weird unnamed processes
Detailed timeline:
5:12 PM: Incident begins according to VZW data usage website (2.60410 GB used). This is around the last time that I used my phone at the laundromat before getting dinner and watching Game of Thrones.
8:04 PM: 50% of data allowance used (txt msg)
8:31 PM: 75% of data allowance used (txt msg)
8:58 PM: 90% of data allowance used (txt msg)
9:13 PM: 100% of data allowance used (txt msg)
10:05 PM: Got the text messages and immediately put the phone into airplane mode
10:30 PM: Took screenshots
10:45 PM: Enabled wifi, installed Kaspersky premium. Scan returned no threats.
11:00 PM: Left phone in airplane mode, went to sleep.
The questions:
What was the root cause of this issue? Did Reddit News freak out as a result of an esoteric bug or was my phone hacked?
If this was a simple Reddit News bug, then why was the Android OS also trying to use such a massive amount of background data?
What the hell are these unnamed numeric applications? I've inspected my process history and this is the first time they have ever attempted to use data.
I'm pretty sure that I can explain this situation to Verizon and get out of having to pay additional data usage fees, but I would like to know more about the problem before I get in touch with them.
all 13 comments
best
[–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago*
All I can think is your phone may have background downloaded an OTA update, and you'd then be prompted with something like, "As update to your Android system has been downloaded, would you like to install it now?"
I do find it very odd that the update would be 2.6GB. As a rough base, the CyanogenMod 10.1 firmware for your device is well under 200MB, so unless Verizon has a ****-ton of bloatware in the update, or it had to attempt to download multiple times for some reason, it may be a stretch.
But doing a little homework, it looks like the Verizon Razr Maxx was updated to 4.1 in late March. Maybe they're still rolling it out in waves? Have you gotten the update yet?
Edit: Aaaand I just noticed you appear to be running an AOSP-based ROM, which totally rules out a carrier update being sent out.
Edit2: If you want to live dangerously, you could try running:
#kill -9 12289
That 12289 is the PID listed in your screenshot. But don't run that without fulling understanding the kill command.
The ps command could also be of use, but probably not.
permalink
[–]lechnito[S] 2 points 1 year ago
I can confirm that the phone is currently at 4.1.2 and that I wasn't prompted for an OTA update.The fact that both the Android OS and Reddit News processes were simultaneously using an extremely large amount of data is unlikely to be a coincidence...
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 3 points 1 year ago
That is very curious that the spikes happened at the same time.I'm curious. It may have put at least some of that 2.6GB somewhere. You could use a data visualizer tool to see if you can find it, which may lead to more clues.
permalink
parent
[–]lechnito[S] 2 points 1 year ago
The largest directories are:
DCIM: Normal looking photos (90,825 KB)
Android: Primarily map cache data (64,846 KB)
If it was downloading content then it did not significantly save content to storage. It's not like I have anything particularly sensitive on the phone, but the idea that it was uploading a snapshot of my data definitely makes me uncomfortable.
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
Yup, Digital Camera IMages and videos.Somewhere in /sdcard/Android would be my guess as to where a mysterious file would be downloaded, but if it's only 64MB, and mostly map data, I'd safely rule it out.I'm sorry, but I'm stumped here.Edit: I should mention I don't think this is malware, because unless a malicious app gained superuser access, any data it used would show under it's own apk in the data usage list, not Android OS.
permalink
parent
[–]mistrbrownstone 0 points 1 year ago
DCIM: Normal looking photos (90,825 KB)
Was it trying to auto-upload pictures or video to G+?I ******* hate that.
permalink
parent
[–]lechnito[S] 1 point 1 year ago
Although I'm not really up to speed with the Android platform, I come from a UNIX background so I feel comfortable running commands. How do I pull up a bash terminal? Do I need to root the phone first?
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
There's a number of terminal emulators in the Play Store that work well. You don't need a rooted phone to get to the shell as your user, but any privileged command won't execute unless you can grant it permission from the Superuser app that is installed when you root the device. So you could probably do a ps -e, but not a kill -9.
permalink
parent
[–]lechnito[S] 1 point 1 year ago
Got it. I downloaded a terminal emulator but unfortunately those processes no longer exist.Does Android keep a generic log of system level events like /var/log/syslog?
permalink
parent
[–]omgmrjmako/PA, deb/Carbon 2 points 1 year ago
I don't think so, and I know you'd need superuser permission to read most of the files in /var/log anyway. I'm not super familiar with how Android does its logging, but I do know that the two files of interest are the logcat and dmesg.
permalink
parent
[–]sh0nuff 1 point 1 year ago
Want to mention here that using your settings to set your data cap (set it on your billing day), then you won't go over again.Those text messages are really unhelpful, as they send out well after the data has been used. Chances are good you hit close to the 2GB mark before you received the bulk of the messages.
permalink
[–]kindofabuzz -4 points 1 year ago
Quit installing pirated apps.
permalink
[–]lechnito[S] 1 point 1 year ago
That's definitely not the case here; both my PC and and Android phone are free from pirated apps.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there any Negative Marking in 70-511 Exam

Similar Messages

Maybe you are looking for