Is there any one now know how can i setup and airport express?
that is my question
but now he work
alex_h1 wrote:
Hi,
If you want to set up your AirPort Express to extend your wireless network, then take a look at the information in the article below.
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n) - Apple Support
Have a great weekend,
Alex H.
Similar Messages
-
Hi,
may i know any one working in cognitive radio research and applying machine learning techniques using the spectrum data collected from NI usrp kitsCan't edit my message anymore, so for the tldr crowd (too long didn't read), here is a shorter version:
The good:
E4200 worked fine for about 15 hours with great throughput and link quality (with one brief disconnect in the middle - online gaming software shows brief disconnects that otherwise go totally unnoticed).
The bad:
Wireless on the E4200 stopped broadcasting entirely (to a Windows 7 laptop with a 802.11n 2.4 GHZ USB adapter).
I had switched between two adapters that use the same chipset, same driver and in fact show up as a single device in device manager) without rebooting the router but it worked (fine) for an hour after I swapped the adapters.
Right before I rebooted it, I checked and the E4200 was not hot to the touch and wired internet was still working after the wireless radio stopped working.
A reboot of the router cured it.
The open question as to the root cause:
Now I want to know whether this wireless radio ceasing to broadcast (requires a reboot of the E4200) will happen daily?
I.e. I want to know whether it it really is overheating (then again why would only some have that problem needing to reboot daily while others have gone weeks with the E4200 without a single reboot being needed and without any problems occurring) or whether it had to do with changing the adapters back and forth without rebooting the router. Keep in mind that the router worked fine for an hour or so after I stopped swapping the adapters.
Extra question:
Will getting a Cisco AE1000 USB adapter perhaps help? (I know this is a loaded question and their is no easy / sure answer, but even a "maybe" or reasons why it might help at this point would be better than nothing.
Any similar experiences (with the router needing to be rebooted to get wireless radio back on) would be appreciated as it may help myself and others experiencing these types of issues. -
Hi i have a macbook pro with retina display and these mac doesnt have a lan port, so i cant connect the aiport express to my mac with a cable.
Thanks for the helpYou would need the AirPort Utility app for your iPad in order to administer the AirPort Express. Note: The version of this AirPort Utility will not support older 802.11g AirPort base stations. The AirPort Utility is available from the Apple App Store.
-
Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks
There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts. -
Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?
Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.
Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support -
I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?
Hi Abdul,
Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
Regards,
Franz -
Can any one tell me how can i claim warranty of my my iphone charger online ?
Can any one tell me how can i claim warranty of my my iphone charger online ?
See the "Service -> How do I obtain service" section of this page:
http://www.apple.com/support/iphone/service/faq/
selecting your country as appropriate.
Regards. -
i cant connect my i phone 4 to my sony vaio laptop via bluetooth i am having problem can any one help me how can i connect my i phone 4 to my laptop using bluetooth i tried to paired but it just doesnt work help me pls!!
Unless you're trying to tether your phone to your computer or create a personal hotspot, it won't pair with your computer by bluetooth. File transfer by bluetooth is not supported. So, you can quit trying unless you're trying to tether.
-
Is there any way .? how can i see. what going on my code
hi jdev experts,
am using jdev 11.1.1.5.0 - adfbc
i have a amimpl classes i want to see the each and every value of the row, while perform each and every for loop
is there any way .? how can i see. what going on my code
can anyone paste simple video link regards this?Hi,
what about debugging ? Just set a break point and run the Debugger (the red run icon). Or you use logging http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part to print out for each row whats going on
Frank -
Is there any way to know how much time swing client is on open state?
Is there any way to know how much time swing client is on open state? My requirement is to show a message some time after the swing client open i.e., 4-5 hours.
You could also consider using javax.swing.Timer and java.awt.event.ActionListener (or javax.swing.Action) which takes care of running the actionPerformed code on the EDT.
db -
Ive synced and backed up my iPod onto my old laptop which has now broken, how can i sync and bakc it up onto a new computer without everything being wiped?
you will have to plug it into your new computer and connect it to itunes, then hit the backup button it should start backing up. THERE YOU GO! HOPE IT HELPED! please hit the "this solved my question" button
-
WHILE SYNCHING iPHONE 3 WITH iTUNES.
MY 1700 CONTACTS VANISHED FROM iPHONE AND iTUNES.
I AM RUNNING AROUND TO GET IT RESTORED. ANYONE THERE WHO COULD HELP.
HOW CAN I RESTORE AND GET MY CONTACTS BACK.Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
pinto123 wrote:
i did every thing you said and when i went to restore this is what happened: the ipod software update server can not be contacted. make sure your network settings are correct and your network connection is active, or try again later. what do i do to restore. i used the last way to do it the dfu -
How can I get the Airport Express to handle all the PPPoE stuff?
Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul -
Hello! How can i setup and what to enable that my secretary has my shared calendar on her Iphone and that she can edit it? We are on Exchange 2010, Outlook 2010, Iphone 4s. Can it be done through some app? Thank you! I'm trying to avoid creating my exchange activesync account on her Iphone and then sync only my calendar.
Thank you for your time. I'm trying to avoid that because she can then simply turn on mail syncronization and then she could read my mail. Another reason is our password policy, that enforces changing our windows logon password every 90 days. Of course changing windows logon passwords demands changing exchange account logon info (password) on Iphone. I have read somwhere that there was an app but it was removed from app store. Any other suggestions would be appreciated.
-
I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements
Maybe you are looking for
-
Opening and closing a frame from an applet security problem
can I open a frame or a window from an applet and close the frame by using System.exit(0) for the frame or will it throw a security problem.
-
New Surface Pro 3 running windows 8.1 (works with Windows 7). Firefox 34.0.5 is browser. Cannot access my website only. Have cleared cache. Works with Internet Explorer.
-
New InDesign Error when Exporting to PDF
since upgrading to CS 5.5 my entire company has encountered numerous issues and errors with InDesign. This however, is a new one and I was wondering if anyone knew the root cause of such an error and a potential fix. here's the error message my marke
-
24 hours ago my suddenly stopped accessing my yahoo mail. I've checked the web version and its working fine. At the bottom of the screen in the mail app it shows downloading 1 of 17 but never downloads the new messages. Any help?
-
I am getting this note while creating receipt rvtptcontrol failed Cause :Your transaction date must be within an open accounting period. You submitted a receiving transaction with a transaction date that does not fall within an open accounting period