Is there any one who knows how to apply machine learning algorithms to the spectrum data collected using ni usrp for ism band to use spectrum efficiently by link adaptation

Hi,
may i know any one working in cognitive radio research and applying machine learning techniques using the spectrum data collected from NI usrp kits

Can't edit my message anymore, so for the tldr crowd (too long didn't read), here is a shorter version:
The good:
E4200 worked fine for about 15 hours with great throughput and link quality (with one brief disconnect in the middle - online gaming software shows brief disconnects that otherwise go totally unnoticed).
The bad:
Wireless on the E4200 stopped broadcasting entirely (to a Windows 7 laptop with a 802.11n 2.4 GHZ USB adapter).
I had switched between two adapters that use the same chipset, same driver and in fact show up as a single device in device manager) without rebooting the router but it worked (fine) for an hour after I swapped the adapters.
Right before I rebooted it, I checked and the E4200 was not hot to the touch and wired internet was still working after the wireless radio stopped working.
A reboot of the router cured it.
The open question as to the root cause:
Now I want to know whether this wireless radio ceasing to broadcast (requires a reboot of the E4200) will happen daily?
I.e. I want to know whether it it really is overheating (then again why would only some have that problem needing to reboot daily while others have gone weeks with the E4200 without a single reboot being needed and without any problems occurring) or whether it had to do with changing the adapters back and forth without rebooting the router. Keep in mind that the router worked fine for an hour or so after I stopped swapping the adapters.
Extra question:
Will getting a Cisco AE1000 USB adapter perhaps help? (I know this is a loaded question and their is no easy / sure answer, but even a "maybe" or reasons why it might help at this point would be better than nothing.
Any similar experiences (with the router needing to be rebooted to get wireless radio back on) would be appreciated as it may help myself and others experiencing these types of issues.

Similar Messages

Is there any one now know how can i setup and airport express?

that is my question

but now he work
alex_h1 wrote:
Hi,
If you want to set up your AirPort Express to extend your wireless network, then take a look at the information in the article below.
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n) - Apple Support
Have a great weekend,
Alex H.

Hei. I updated my iphone 4 to the new IOs 6, seems like I have lost all my contacts... Any one who knows what I can do? Please ;-)

Hei. I updated my iphone 4 to the new IOs 6, seems like I have lost all my contacts... Any one who knows what I can do? Please ;-)

Everything is Sorted!
The release of iTunes 11.0.2 and iOS 6.1.2 for my iPhone 4, seems to have sorted everything. I can now sync music, films and photos between my MacBook and my phone.
I was dubious about blindly doing the updates but decided they couldn't really mess up any further functionality so I went for it and it's sorted now.
Look in to, and take the gamble, it's up to you.

Is there any way to know how much time swing client is on open state?

Is there any way to know how much time swing client is on open state? My requirement is to show a message some time after the swing client open i.e., 4-5 hours.

You could also consider using javax.swing.Timer and java.awt.event.ActionListener (or javax.swing.Action) which takes care of running the actionPerformed code on the EDT.
db

Can any one tell me how to attach a pdf file to the mail through workflow

I have a smart which i am able to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow

Hi,
To create the task for attachment
Use the BOR SELFITEM and method NOTES_APPEND.
The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
But the TYPE : OBJ.
Similarly using NOTE_DISPLAY method u can display the documents u like.
In any work item u have the facility to attach any atttchment for further circulation .
Attchment @ WORKITEM
1.Click the workitem for which you want to create the attchment
2.Press create attachment
3. Add the attachment u like (PDF)
Reward points for useful answer.
Richard A

Is there any way to know how many copies of the same game I bought with GCU?

I've bought Dying Light for ps4 probably twice or three times now.. Do return and rebuys count towards your limit of 3 copies of the same game bought with GCU? Or trade up offers? Or on a minimum of $5 deposit? Or does it have to be fully paid off to count?
After purchasing the game today and having the employee adjust the price of the game for me since this physical weekly ad showed that Dying Light for GCU members is $31.99, I see on my receipt that there is no unlocked game discount. It just says sale price and price match discount. Now, the first employee tried to adjust it for me and applied my GCU which showed $39.99. When she adjusted it to $31.99, it went down to $25 so I guess GCU was applied even after adjusting it. She then called a manager and adjusted it to $31.99 and I got the game for $33+tax.
So I'm guessing this purchase didn't count towards my limit since I didn't pay when GCU was applied and when it was adjusted, I don't see GCU game discount on receipt. Someone please confirm for me that this didn't count towards the limit. Thanks
Solved!
Go to Solution.

Hi SomethingNanika,
First, thanks for being a Gamers Club Unlocked (GCU) member! It certainly sounds like you’re taking advantage of your benefits and I’m happy that you’re so consciously aware of the limitations of said benefits. I’m also happy to provide some details around the purchase limits and what does/doesn’t count towards those limits.
When you purchase a game and pay for it fully, that counts as one towards your limit. If you return that game, that quantity of one is then removed from your limit. However, if you do a return and a rebuy, it basically counts as a wash, as you’re subtracting one and then adding it right back. Furthermore, simply placing a pre-order deposit doesn’t count towards your limit until the game is paid in full and the pre-order is fulfilled.
Lastly, if your GCU benefits aren’t applied to a purchase, then you are correct in saying that would not count towards your limit of three titles. Also, here’s a refresher:
“The limits for using your Unlocked membership will be three (3) copies of a new (i.e not pre-owned) video game software title per platform, per year. Collector's and Limited Editions count towards this title limit. Game of the Year editions, usually released much later and including additional content, do not count towards this limit. Game of the Year versions count as a separate title and have their own limit of three copies per platform, per year.”
Let us know if you have any other questions!
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Is there any one who can help me solve this?

Hi.
I'm taking AP Computer Scinece AB in high school now.
I've been assigned many programs so far. But.. I can't figure them out.
There are two programs I need your help. So..Please!!!!!! Help Me!!!!
Please!! Enjoy helping me!
<Program #1>
It's divided into three small programs and I've figured out one of them, which was the easiest one..You will be able to see the programs if you click on the link below.
(page1)
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=2&page=1
(page2)
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=3&page=1
<Program #2>
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=4&page=1
The way I figured out first part of program #1 was like this :
public class ThreeX1
public static void main ( string[] org )
system.out.println ();
int startValue = 21;
int count = 0;
while (startValue >1)
count ++;
if (startValue % 2 == 0)
startValue = startValue/2;
else
startValue = 3*startValue +1;
system.out.println ( count );
===================================================
From there, for the second and third programs of program #1, I tried to figure it out by using 'for' statement instead of 'while', but I couldn't.
So..Please help me out.. Thank you
or you can e-mail me too. It would be great too.
add. : [email protected]

I probably shouldn't be doing your homework but here it is:
public class ThreeX2{
     public static void main ( String[] org ){
          int startValue = 2;
          while(startValue<100){
               System.out.print(startValue);
               System.out.print("\t");
               System.out.println(timesToGetToOne(startValue));
               startValue++;
     private static int timesToGetToOne(int intForValue){
          int count = 0;
          while (intForValue!=1){
               count ++;
               if (intForValue % 2 == 0)
                    intForValue = intForValue/2;
               else
                    intForValue = 3*intForValue +1;
          return count;
public class ThreeX3{
     public static void main ( String[] input ){
          int maximumTries = 1000000;
          int numberOfitterations = 10;
          try{
               numberOfitterations = new Integer(input[0]).intValue();
          }catch(Exception e){
          try{
               maximumTries = new Integer(input[1]).intValue();
          }catch(Exception e){
          int startValue = 2;
          while(startValue<maximumTries){
               if(timesToGetToOne(startValue)==numberOfitterations){
                    System.out.print("When startvalue is: ");
                    System.out.print(startValue);
                    System.out.print(" it will take exatly ");
                    System.out.print(timesToGetToOne(startValue));
                    System.out.println(" iterations to get to 1.");
                    // remove the next line and it will show all values that
                    // takes numberOfitterations amount of times to get to 1
                    break;
               startValue++;
     private static int timesToGetToOne(int intForValue){
          int count = 0;
          while (intForValue!=1){
               count ++;
               if (intForValue % 2 == 0)
                    intForValue = intForValue/2;
               else
                    intForValue = 3*intForValue +1;
          return count;
}Problem 3 is diffucult, since the input is one date I assume that the current reading is for this date. I don't
know the date of the previous reading so I cannot calculate if the consumption is between June through
Ocober.
your Main method shoud have 4 inputs date accountNumber currentReading previousReading
Your main function would look like this:
     public static void main ( String[] input ){
          Calendar date=null;
          int accountNumber = 0;
          int currentReading = 0;
          try{
               String[] s = input[0].split("/");
               date = Calendar.getInstance();
               date.set(Calendar.YEAR,new Integer(s[2]).intValue());
               date.set(Calendar.MONTH,new Integer(s[0]).intValue()-1);
               date.set(Calendar.DAY_OF_MONTH,new Integer(s[1]).intValue());
          }catch(Exception e){
               System.out.println("cannot get date, please start this program the following way: ");
               System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
          try{
               accountNumber = new Integer(input[1]).intValue();
          }catch(Exception e){
               System.out.println("cannot get account number, please start this program the following way: ");
               System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
          try{
               currentReading = new Integer(input[2]).intValue();
          }catch(Exception e){
               System.out.println("cannot get current reading, please start this program the following way: ");
               System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
          try{
               previousReading = new Integer(input[3]).intValue();
          }catch(Exception e){
               System.out.println("cannot get previous reading, please start this program the following way: ");
               System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
// check the date between june and oct:
// (5>date.get(Calendar.MONTH))&&(9<date.get(Calendar.MONTH))

HI THERE!IS THERE ANY ONE WHO CAN HELP ME HAVING TROUBLE WITH MY IPHONE 3GS AFTER UPGRADING TO IOS5.0 IT WONT READ THE SIM AND NO SERVICE AND IT WONT ACTIVATED.PLEASE HELP

HI THERE IS THERE ANYONE WHO CAN HELP ME?I UPGRADE MY IPHONE 3GS TO IOS5 AND NOW IT WONT ACTIVATE AND SAYS THE SIM CARD IS NOT SUPPORTED I CHANGE FOR ANEW SIM ALREADY BUT STILL WONT ACTIVATE.PLEASE HELP

you're responding to a post that's almost 2 months old. Time to post your own thread.

Is there any one who will solve this problem

I want to capture from mobile simulator .I have Logitech Web Camera.
I am using J2Me 2.3 API.When I am capturing using J2ME Kit Simulator it is not capturing image from camera but it is capturing the stored image in the kit .So plz plz help on this topic.I have to finish my project but this problem is creating problem.
Regards

Hi
Here is a link that can help you: http://today.java.net/pub/a/today/2005/09/27/j2me4.html?page=1
If you use "capture://video", it will capture video from the default video capture device. When you create a player you need to specify a URI for the locating the media. More details are in the article I mentioned above.
Mihai

Any one who knows that use adt to compile flex mobile projcet with air sdk 3.4 crash

[java] # A fatal error has been detected by the Java Runtime Environment:
     [java] #
     [java] # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x101a9871, pid=5004, tid=7544
     [java] #
     [java] # JRE version: 6.0_16-b01
     [java] # Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 )
     [java] # Problematic frame:
     [java] # C [llvm.dll+0x1a9871]
     [java] #
     [java] # An error report file with more information is saved as:
     [java] # E:\custom\build\deploy\ios\hs_err_pid5004.log
     [java] #
     [java] # If you would like to submit a bug report, please visit:
     [java] #   http://java.sun.com/webapps/bugreport/crash.jsp
     [java] # The crash happened outside the Java Virtual Machine in native code.
     [java] # See problematic frame for where to report the bug.
     [java] #
     [java] Undefined symbols for architecture armv7:
     [java]   "_abcMethod_AOTBuildOutput-0000000001_9708_9708_function spark.components.supportClasses::SkinnableTextBase.isOurFocus", referenced from:
     [java]       _ug_11903 in AOTBuildOutput-0.o
     [java]   "_abcMethod_AOTBuildOutput-0000000001_9465_9465_function spark.components::List.itemRemoved", referenced from:
     [java]       _ug_11903 in AOTBuildOutput-0.o
my adt command like that
<target name="7. Package for IOS" depends="6 Collect IOS">
                    <echo message="Packaging for IOS"/>
                    <java jar="${ADT}" fork="true" failonerror="true" dir="${publish_dir}/ios">
                              <arg value="-package"/>
                              <arg value="-target"/>
                              <arg value="ipa-test"/>
                              <arg value="-provisioning-profile"/>
                              <arg value="${ios_provisioning}"/>
                          <arg value="-storetype"/>
                              <arg value="pkcs12"/>
                              <arg value="-keystore"/>
                              <arg value="${ios_keystore}"/>
                              <arg value="-storepass"/>
                              <arg value="${ios_pass}"/>
                              <arg value="${ipa_file}"/>
                              <arg value="${app_name}-app.xml"/>
                              <arg value="Default.png"/>
                              <arg value="[email protected]"/>
                              <arg value="Default-Portrait.png"/>
                              <arg value="[email protected]"/>
                              <arg value="${assets_dir_name}/." />
                              <arg value="${swf_file}" />
                              <arg line="-platformsdk F:/ios/iPhoneOS6.0.sdk/"/>
                    </java>
          </target>
wating for help, thanks very much

Could you please share your swf and app.xml, packaging, your project (if possible) at [email protected]
I will get a bug logged for this.

HT1918 I am trying to set up my new replacement iphone 5 and i dont know how to transfer my back up to the new phone.

I am trying to set up a new iphone 5 replacement and i don't know how to get my back up to the new phone.

Well you would be first need to be using the ITUNES program. Not be on itunes the internet page. The program will usually be a music note icon on your desktop. IF YOU ARE GOING TO THE INTERNET = safari , internet explorer, firefox, etc ....your not using the program itunes. YOur surfing the web.
with that said , always make sure your running the latest version of itunes. If on a mac >in the upper left , next to the little Apple, click on the word itunes> check for updates.
windows users > where it says FIle EDIT View Controls Store Help across the top> select help > check up updates
>Then plug your phone in
> then when it appears in the itunes window , click on the iphone > it will bring up the option to restore from back up

Is there any one knows how to use labview 6.0 to make a "continue" function like the one in C language?

I am using labview 6.0 and i like to know is there any one knows how to stop the current iteration in while loop or for loop and continue to do the next iteration,just like the "continue" statement in C or C++ language?

Simple test here in LV6 confims that you can't do this. Not in a useful
sense anyway. "Stop" doesn't stop execution simply of the current VI, it
also kills all VIs above it. It would hence be difficult to argue that this
approach is in any way similar to "continue".
What version of Labview have you tested this on and can you post a
demonstration?
Craig Graham
Physicist/Labview Programmer
Lancaster University, UK
"Oleg" wrote in message
news:506500000005000000E45B0000-1011517314000@exchange.ni.com...
> Hi,
> you can orginize all the inner actions of your while loop into the
> SubVI. Then use the Functios/Application Control/Stop.vi in this SubVI
> to stop the current interation in any point you want. This will stop
> your SubVI and yo
u will automatically goto the next iteration in your
> while loop.

Hi There, Any one Know How To Call Workflow Process From Special Menu.

Hi There,
Any one Know How To Call Oracle Workflow Process From Special Menu.
I mean Tool -> Special Menu 1-45
Or How to call Oracle Workflow Process From Command Button.
Thanks
Bachan.

Can u give me some examples.
Second thing we can add special action (special Menus) from Form Personaliztion.
But how to add launch wft through Personalization
Please Give me a breaf detail.
Thanks
Bachan

HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

If you have registered all your Apple products, you can see them at:
https://supportprofile.apple.com

Can any one tell me how to change or know rescue email?

Can any one tell me how to change or know rescue email?

There are instructions on this page on how to see/edit/add it :
Navigate to appleid.apple.com using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.

Is there any one who knows how to apply machine learning algorithms to the spectrum data collected using ni usrp for ism band to use spectrum efficiently by link adaptation

Similar Messages

Maybe you are looking for