Is there any option on Cisco Unified CM Administration 9.1.1 to show caller ID number when using MOBILITY option?

Dear All,
I am using Cisco Unified CM Administration 9.1.1 and MOBILITY works fine.
However when somebody calls from external phone number into internal user number and MOBILITY option is ON and obviously, forwards the call for the user's cell.....in this case user can see only main company number, but not a caller number.
So, is there any option to change it?
Thank you

Go to the GW and run some debugs to find out exactly what you're sending, chances are, your telco is overwriting the original called number as it's nor part of your DID range.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

Cannot reset user vmail password with Cisco Unified CM Administration

We are using Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to me saying that they could no longer access voice mail, getting invalid pin. Ichanged the pin with the Cisco Unified CM Administration which accepts the new pin no problem but when we try it from the phone it doesn't work. Any ideas... Thanks Don

Hey Don,
Well, that's no good
There should be no correlation between resetting the user PIN
and the forwarding to voicemail.
Let's say that the user is @ DN/extension 5999.
In CUCM admin go to;
Device>Phone>Find List by Directory number> find 5999
on the DN config page look at the Call Forward sections (all, no answer, busy)
and make sure they are set to forward to VM (usually by using the VM checkbox)
If you need to, have a look at a working phone/DN for comparison
Cheers!
Rob
"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting"
-Springsteen

I have upgraded my iPhone 4S to ios 6... I am surprised to see that the wi-go option is grayed out.. I did reset all the setting but no luck... Is there any fix coming for this or will apple exchange the device??? I want wi-fi option back

I have upgraded my iPhone 4S to ios 6... I am surprised to see that the wi-go option is grayed out.. I did reset all the setting but no luck... Is there any fix coming for this or will apple exchange the device??? I want wi-fi option back

Seems like a wide spread problem. See this post: https://discussions.apple.com/thread/4310121?tstart=0

Tool(s) in Cisco Unified CM Administration to support Identity Management (IDM)?

Hi,
In our "Cisco Unified CM Administration System version: 7.0.1.11000-2" installation, I can manually create and administrate users information.
But we do also have an identity Management (IDM) system in house, that creates users in Microsoft 2003 Active Directory and some sub-systems with the necessary rights they need.
It would be a lot easier, if our IDM system could create the user in our “Cisco Unified CM Administration System version: 7.0.1.11000-2" when they are created in the MS Active Directory, with the right username, first name, last name, department name and so forth.
Is there any tool that I can use to make this automatic import of user information?
Kind regards,
Carl-Marius

There are couple solutions.
You may integration CUCM with LDAP. Whenever you have a user created in LDAP, CUCM will synchronize that user into CUCM user database. Then you may assign different permissions for different LDAP users.
If you don't want to do LDAP integration, you may also consider using AXL to create users in CM database. AXL is an interface for 3rd-party software to read/write database.
Michael
http://htluo.blogspot.com

Cisco Unified CM Administration ver 7.1 date and time issue

We are using Cisco Unified CM Administration ver 7.1. I think this will be an easy one. I've done it before and need to do it again. Is there an easy way to adjust the time that appears on all our Cisco 7945 phones. It is out by a dozen of minutes... Thanks Don

The latest release of CUCM 7.1.5 is 7.1.5.35901-1, so you can always try that. Link to download:
http://software.cisco.com/download/release.html?mdfid=282421166&flowid=45895&softwareid=282074295&release=7.1(5b)SU6a&relind=AVAILABLE&rellifecycle=&reltype=latest
The latest version of CUCM software is 9.1.2 with 10.0 coming out any day, thought those would be considered major upgrades and would require some planning, on i.e. ensure hardware compatibility, all software compatibilities, ELM licensing migration, etc.
HTH,
Chris

Cisco Unified CM Administration is not working in RDP sessions .

Dear all.,
Cisco unified cm administration we are working in sandbox labs connected through vpn of Cisco. But we are not able to access through remote desktop sessions. is it any possible to access through remote desktp sessions..?

Hi
We are getting Cisco Unified CM Administration using sandbox labs. we are having a product for telecommunication . The name is CADEBILL. we are implementing the process from that product. we installed that product in a server. We have VPN through that sandboxlabs. That vpn is installed in local pc. From that local pc we will access the server in Remote desktop . in that server we are not able to install the anyconnect vpn . So this problem.
This is cisco unified CM version. System version: 8.6.1.20000-1

ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

I lost my iPod Touch 4th Gen. Find my iPhone application was not installed. Is there any way if I can find it or else I can lock the device so nobody uses it?

I lost my iPod Touch 4th Gen. Find my iPhone application was not installed. Is there any way if I can find it or else I can lock the device so nobody uses it?

lost/stolen
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Is there any way to connect my Apple wireless/bluetooth trackpad and keyboard to my Mac Mini without using a wired or usb keyboard?

Is there any way to connect my Apple wireless/bluetooth trackpad and keyboard to my Mac Mini without using a wired or usb keyboard?

Well, I read that already, but I am trying to start up my Mac mini(new purchase) and I cannot get to all the system preferences etc since I cannot get past the startup screens. The site also mentioned waiting to turn on the keyboard until a language was requested. Neither language screen worked. I feel as though I'm just about ready to throw in the towel.

UCCX cannot open the "Cisco Unified OS Administration" system

Hi,
When I select "Cisco Unified OS Administration" and click "Go", the system shows below error messages.
Navigation:
Cisco Unified CCX Administration (Can open this webpage)
Cisco Unified CCX Serviceability    (Can open this webpage)
Cisco Desktop Administrator         (Can open this webpage)
Cisco Unified Serviceability           (Can open this webpage)
Cisco Unified OS Administration   (Cannot open, it shows error page)
Disaster Recovery System           (Can open this webpage)
What is the problem?
Please help, thanks.
HTTP Status 500 -
type: Exception report
message:
description: The server encountered an internal error () that prevented it from fulfilling this request.
exception:
org.apache.jasper.JasperException: java.lang.NullPointerException
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:418)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     sun.reflect.GeneratedMethodAccessor228.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:597)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
root cause:
java.lang.NullPointerException
     org.apache.struts.taglib.TagUtils.computeURLWithCharEncoding(TagUtils.java:428)
     org.apache.struts.taglib.TagUtils.computeURLWithCharEncoding(TagUtils.java:311)
     org.apache.struts.taglib.logic.RedirectTag.generateRedirectURL(RedirectTag.java:294)
     org.apache.struts.taglib.logic.RedirectTag.doEndTag(RedirectTag.java:268)
     org.apache.jsp.index_jsp._jspx_meth_logic_005fredirect_005f0(index_jsp.java:89)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:64)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     sun.reflect.GeneratedMethodAccessor228.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:597)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
note: The full stack trace of the root cause is available in the logs.

Hi,
After reinstalling the UCCX system, everything is ok.
Thanks for your help.

Cisco Unified OS Administration Login

I am wondering if it is possible to change how to login to Cisco Unified OS Administration and Disaster Recovery System via the Web front end of Call Manager 6.1.3. Currently you need to login as Administrator to those 2 Web pages, but for Cisco Unified CM Administration, Serviceability, and Reporting you do not. I can login with my Call Manager account. It would be a lot easier if my and the other administrator could just use are Call Manager login for those 2 pages instead of the Administrator account. Is this possible?

No, OS admin and DRS systems are separate from Admin pages.
You need to authenticate to each one because of what privileges each one provides within the system and at which level they're.
HTH
java
if this helps, please rate

Flash crashing when using Command + Option + S for Scale and Rotate?

Flash crashing when using Command + Option + S for Scale and Rotate?
It's happening to me when I use those hotkeys
Please let me know if it's happening to you too.
I don't know the cause but I need a fix.
I'm using Adobe FLASH cs6 for Mac
My computer:
Mac mini
Mid 2011
Software OS X 10.8.1 (12B19)
-Line

With all due respect to your totally coindescending reply, this is a bug in Flash. Happens every 4-5 times I use that menu item. Been happening for months, but we just installed a Brand new iMac (1/13). Quadcore 3.4 16G RAM and 1TB Fusion drive. Fresh install of CS6. Not running any other 3rd Party Software. Problem STILL happens in new Flash docs with small, simple vector Graphics.
So instead of blaming the users computers, how about you guys just fix the effin' problem? Thanks.

Calendar not showing multiple days when using Gmail option

Since I installed Mountain Lion the calendar when using the Gmail option does not show the bar (highlight ) when using multiple days. The detail transfer to My I pad perfectly and the Apple work & home are also working. If I click on the first day of an event then it is highlighted.

Automatic update from Apple, resolved problem.

Is there any way to truly unify Exchange and POP accounts?

New iMac 27" owner, and long-time owner of a MacBook Pro
I wonder if there is any way to truly unify the different email accounts in either Mail or Outlook 2011 Mac, as I had with my PC using Outlook 2013. There, I was able to deliver mail from all accounts INTO the inbox of my choice, and I was able to still reply with whatever account it was sent to (3 accounts, one Exchange, two POP).
The 'Inbox' on Outlook 2011 shows all of them, but it doesn't replicate what I had, whereby the messages were still tied to their original 'sent to' accounts, but appeared in one inbox, AND, most importantly, if I deleted them from the inbox, they were deleted across all my messages that accessed the Exchange server. If I choose just to have all the emails 'moved' to the Exchange inbox, then if I reply, I have to choose the account manually, as it could be one of three, but will always bring up Exchange, as it was 'moved' not shown there, as per the Outlook 2013 instructions/rules above.
Has anyone done this successfully? I don't care which email client I use - Outlook 2011 or Mail - I just want it to work!

No. Unless one of the IDs becomes inaccessible, leave it as is.
(82397)

How do I remove the certificat error everytime I try to access the Cisco Unified CM Administration web-page?

Hi,
Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no trust to this webpage security certificate and if I those "continue to this page (not recommended)", I get access to the Cisco Unified CM Console web page.
I have tried to add the https://IP-adress to secure web pages in Internet Explorer 7, but this to no avail, it does not help.
How do I add this certificate to a trusted something, so I do not get this warning every time I open the page?
Kind regards,
Carl-Marius

Hi Michael,
It worked when I change the IP-address to the name that was written in the certificate, and imported the certificate to Internet Explorer.
Thank you for your fast and very precise help!
Kind regards,
Carl-Marius

Is there any option on Cisco Unified CM Administration 9.1.1 to show caller ID number when using MOBILITY option?

Similar Messages

Maybe you are looking for