Is there any order in which multiproviders make selection?

Hi:
I have a multiprovider into my query.There are two cubes and an ODS. The first cube has data at COMPANY CODE,SHIPMENT DOCUMENT,MONTH AND VENDOR level, the second cube has only 1 register per company per month, containing some numbers which i used to make some arithemtical operations. In the ODS I have information of some equipments valid per month.
When I define my query i use the value that is in the second cube, to calculate some ratios, making multiplications with all the shipments of the firstone. Then I tried to subdive my the dimension 0VENDOR I specified a ratio that is contanied in the ODS, and this is always blank.
My questions are:
Is it right to supose that this value obtenined in my second cube will multiply all the values of the shipment that i have in the first one or do I have to modify my cube to update this value from my other cube?
Is there any special order in which my multiprovider stablish the criteria selection?
Thanks.
Points for helpfull answers

Hi,
It's not possible to multiply the key figures of the two cubes in a multicube row by row or anything which you want to happen i.e.before aggregation.
And I  think you are looking for multiplication row by row between tow cubes.
In the case of multiproviders after combination the two rows from different cubes are not obtained in one row and there fore it will like multiplying some value with blak in the other side.
you can do subtraction or addition but the multiplication will not bring the desired result.
Hope it clears
Thanks

Similar Messages

  • Is there any order in which records are stored in SessionDetails and Conferences Table in Lync Archiving DB?

    Hi,
    Archiving Database Schema states that in the tables SessionDetails and Conferences tables, the column 'SessionIdTime'
    holds datetime value at which session request is captured by Archiving service.
    But, is there any order in which the records are stored in the db?
    Say, a session 'S1' starts at 1:00 PM and another session 'S2' starts at 1:05PM. 'S2' ends at 1:10 PM and 'S1' is still on going. I have observed that on ending the session the record is written to DB, so is it possible that details of session S2 is written
    in db prior to 'S1'?
    Is there any way to query these tables, in the order in which the records are stored?
    Thanks and Regards,
    Arjabh

    Hi,
    You can export records that have been stored in the Lync Server Archiving database with the following cmdlet in the link using Lync server manageshell.
    http://technet.microsoft.com/en-us/library/gg398452.aspx
    You need to write a SQL query/view or report server report to display the information.
    More details:
    http://blogs.technet.com/b/dodeitte/archive/2013/06/02/sample-lync-server-archiving-report-available.aspx
    For the issue about “is there any order in which the records are stored in the db?” you can post a case to SQL forum and more experts will help to verify the issue.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Is there any standard report which give all info about purchase order.

    hi
    is there any standard report which give all information  about purchase order.
    i need following information from Purchase Order.
    Vendor No,  vendorname, PO No, basic     Excise      insurance     Frieght.
    Thanks.

    Hi,
    Following are reports for PO list.
    ME2C           Purchase Orders by Material Group  
    ME2J           Purchase Orders for Project        
    ME2K           Purch. Orders by Account Assignment
    ME2L           Purchase Orders by Vendor          
    ME2M           Purchase Orders by Material        
    ME2N           Purchase Orders by PO Number
    Message was edited by:
            Vigneswaran S

  • Is there any standard report which give all information about purchase orde

    hi
    is there any standard report which give all information about purchase order.
    i need following information from Purchase Order.
    Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght.
    thanks .

    Hi,
    Try following
    MC$G  PURCHIS: Material Purchase Val Selection
    MC$I  PURCHIS: Material Purch Qty Selection
    Kedar K

  • Is there any way by which I can not use Thunar Sys Tray icon?

    I am using stalonetray in OpenBox in Arch and when I copy-paste or cut-paste files in Thunar, a sys tray icon pops up. I don't want it to pop up.
    Is there any way by which I can make it to not pop up?

    Trilby wrote:
    I haven't used thunar for a while - but I don't remember it ever doing this before.  I just verified that it doesn't here (freshly installed thunar, and cut-pasted, copy-pasted, etc, and I didn't get a tray icon.
    Are you sure this isn't some other tool, like a clipboard manager?  Are their any tooltip popups or menus available on the tray icon and/or what happens when you click the icon?
    No. I use only Thunar. When I hover on the icon it says that "1 file operation running" when a copy-paste or cut-paste operation happens and when I left click and right click on it, it shows the copying window of thunar. The icon shows two small yellow folders placed diagonally. It's the same icon that appears on the file operation progress window of Thunar. I don't know whether Numix has anything to do with the specific icon though.
    Last edited by chosentorture (2015-01-11 00:13:32)

  • Is there an order in which i should learn the CC/CS applications? Does it help in a certain order?

    I'm new to all CS applications, though I'm familiar wit the concepts. I just bought CC and want to start teaching myself how to use each app (primary end goal being photoshop, illustrator, and inDesign). is there an order in which i should learn the apps that makes it easier to comprehend it and others?
    thanks!

    Hi Blair,
    Personally, I think they are all unique enough in their own right that the order wouldn't really matter. I'm biased towards Photoshop. You might want to spend time going through the content here:
    http://tv.adobe.com/show/learn-photoshop-cc/
    http://tv.adobe.com/show/learn-illustrator-cs6/
    http://tv.adobe.com/show/learn-indesign-cc/
    and here
    https://helpx.adobe.com/creative-cloud/products.html
    If you already know the concepts, it will be a matter of learning the interface and how to apply the concepts in practice.
    -Dave

  • My iPhone 4s notified me that I had to manage my storage  so I deleted  apps that used a lot of space I deleted almost all my picture and it still keeps telling me  I don't have enough storage  is there any other way I can make room on my phone ?

    My iPhone 4s notified me that I had to manage my storage  so I deleted  apps that used a lot of space I deleted almost all my picture and it still keeps telling me  I don't have enough storage  is there any other way I can make room on my phone ?  Were it shows how much storage  I have available it still says 9.9 even after all that I have done so I don't know if I need to change my storage plan or what but anything will help I guess

    Check for 'others' in iTunes against your iPhone.
    Restore from a previous backup to reclaim some of it.
    Still want more, Restore in iTunes, setup as New.

  • Is there any way through which I can stop download of my ABAP programs???

    Dear all,
    I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
    Thanks in Advance
    Sachin Gautam

    Hi again,
    1. In that case we cannot do much.
    2. However,
       we can use
       the exit
       SEUED001
      (fm is EXIT_SAPLS38E_001)
      to restrict the program
      in edit mode,display mode
      etc etc.
      depending upon the PROGRAM NAME.
    I hope that serves your purpose.
    regards,
    amit m.

  • Is there any default calendar which I can use on my form and report

    Hi All,
    Is there any default calendar which I can use on date field on my form and report.
    just by change its property like double click on date field and property calendar = yes
    or any other way.
    thanks
    mohan

    hi
    create a functions something like this.i hope it helps u.
    function call_calender ( f_dtm_set in date default sysdate ) return date is
    l_dtm  date;
    l_list paramlist := get_parameter_list ( 'CALL_CALENDER' );
    begin
    if
      not id_null ( l_list )
    then
      destroy_parameter_list ( l_list );
    end if;
    if
      trunc ( f_dtm_set ) != trunc ( sysdate ) --> if you call the calendar function with a date, the calendar will change to that date
    then
      l_list := create_parameter_list ( 'CALL_CALENDER' );
      add_parameter ( l_list, 'DTM_SET', text_parameter, to_char ( f_dtm_set, 'dd/mm/yyyy' ) );
    end if;
    copy ( null, 'global.calender_date' ); --> create a null global
    call_form ( 'form_name', no_hide, no_replace, no_query_only, l_list );
    if
      not id_null ( l_list )
    then
      destroy_parameter_list ( l_list );
    end if;
    if
      name_in ( 'global.calender_date' ) is not null  --> if the global is not null, give the choosen item back
    then
      l_dtm := to_date ( name_in ( 'global.calender_date' ), 'dd/mm/yyyy' );
    end if;
    erase ( 'global.calender_date' );
    return ( l_dtm );
    end;sarah

  • Is there any process\service which can modify and count a Global fragment in a form(xdp)

    Hi,
    Is there any process exist which can count number of fragments or modify a fragment in a form (either in pdf or xdp).
    Regards
    Sunil Gupta

    no there is no activity or process because global fragments are used in adobe lc designer for developing a form. when a form is created as a document then no concept of global fragment left. it gets embedded in form
    regards

  • TS3694 I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better

    I am using iphone 3gs, I upgraded my i-os to 6.0 from 5.1.1 however I am facing performance issue, along with this all the applications including settings or any other shuts down automatically. Is there any way by which I can use my phone in better way?

    No, downgrading from any version of iOS to an earlier version is not supported.

  • HT204053 Is there any chart by which how itunes controls the iphone can be understood easily

    Is there any chart by which how itunes controls the iphone can be more understood easily

    Good idea. I've already used the feedback for my general suggestions to improve the way Apple handles bug reports (and tried sending it to Steve Jobs too), but I'll send a specific suggestion for a bug app on the iPhone.
    However, my question is whether there is a simple way to send bug reports from the iPhone now that I have overlooked.

  • ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory

    ARE THERE ANY WAYS BY WHICH I CAN FIND THE Appln Servlet Container Memory .

    You can check out Tomcat memory usage using Tomcat Manger
    and clicking server status.
    It gives the information like this
    Free memory: 489.80 MB Total memory: 508.12 MB Max memory: 1016.12 MB
    For specific application stats, i think there are some profilers which u have to search in google.

  • Hello, is there any calender application which keeps historical data for iPad 2?

    hello, is there any calender application which keeps historical data for iPad 2?

    The one built-in keeps whatever historical data you sync to it.

  • Is there any standard report which contain all these fields

    is there any standard report which contain all these fields
    1. plant
    2. material no.
    3. profit  center
    4. movement type
    5.g l a/c
    6.posting date
    we have it in z form one of the job it does is that what all materials entries came to a single gl we can know from it
    like we can know what all materials were charged to repair to p and m a/c.
    can any one tell where can we find these field in any standard format in sap.
    pls send some suggestions.

    Hello Sanjeev,
    I don't think there is an existing standard report with all the information from KE5Z plus material name.
    What I would suggest to you is either:
    1) Copy the standard KE5Z program (RCOPCA02) to a Z program one and insert the additional field from MAKT table (it would demand ABAP coding and some considerable effort to develop it);
    2) Create a Query (SQ01 transaction) by selecting data from GLPCA (table that is used in KE5Z) and MAKT (table that contains the material name by language).
    Hope it helps you.
    Best Regards,
    Daniel.

Maybe you are looking for