Is there any pen for iPad with retina display ?
Is there any pen for iPad with retina display ?
Yes. The Bamboo stylus is fully supported. Only the soft rubber tipped side. The Pen side obviosuly not.
Note all stylus that work with the iPad are noticeably thicker than a pen or pencil, so precision is not something you'll get much of.
Look at the link I provided, all those stylus work with iPad. See if you like one of those. Or if you can fnd one of those were you live.
Similar Messages
-
Could anyone tell me whether the ios7 for ipad with retina display comes with flash,compass and calculator!? Because mine has none!
ravelvanto wrote:
Could anyone tell me whether the ios7 for ipad with retina display comes with flash,compass and calculator!? Because mine has none!
Hi ravelvanto,
mine too (iPad 3/WiFi) hasn't this features.
Especially the flash can't be realized because there is a simple lack of a flash light.
Why there is no compass, calculator (I'm using the Wolfram App instead), or the weather app etc. I don't know...
Best regards, mackevin -
I have a iPad with retina display with me. We require an exchange offer for the new iPad Air in india.
Sell your iPad retina and use that money to offset the cost of a new iPad air.
And if your iPad retina works fine for your uses now, why not just wait - odds are there will be an iPad Air II or something new within a year or less anyway - any consumer electronic device gets replaced with a newer model in very short order anyway. If you try to always have the very latest and greatest, you'll go broke (or nuts, or both). -
Panorama for iPad with Retina display
What is the best program to use for the panorama picture for the iPad with retina display? Thx
Why don't you take a look here and see what you think.
http://appadvice.com/appguides/show/best-panoramic-photo-apps -
Click issue with s:Datagrid on mobile for iPads with retina displays (only left half is clickable)
I'm currently testing a Flex mobile application (that was originally made for iPad 2) on high rest iPad fourth generation and iPad Air devices.
I'm having this strange issue where the s:DataGrid, no matter where I use it in the application, will display correctly, but only the left half is clickable to select rows. The number of columns in the DataGrid is not important, nor is the width of the DataGrid, the problem is always present. As soon as you try to click in the right half, it doesn't work.
The application uses an applicationDPI of 160, and scales properly on the higher resolution devices.
So this feels like a bug to me, as if the DataGrid scales properly, but not it's clickable area?
I have tried a bunch of stuff to see if I could work around this issue, like calling invalidate functions and setting the DataGrid's width dynamically, but no change so far.
At this point I'm open for any suggestions or ideas...
Edit: After further testing it seems the same is true for the height. I noticed when I added more rows in the grid. Only the top half of the DataGrid can be clicked. So it really looks like a dimension issue with the clickable area?
ThanksI ended up not using the DataGrid, and decided to use the experimental MobileGrid instead, which is not afflicted with this issue.
So this issue no longer concerns me.
BTW the default theme of MobileGrid is dark, but can be lightened up with CSS and by extending the MobileGrid skins, up to a point where I almost can't tell the difference v.s. the DataGrid.
It also performs better then the DataGrid. since it's based on List. With 300 elements, it scrolled noticeably faster. -
Will there be a trade-in offered for the New iPad and the iPad with Retina Display?
I don't really understand what's going on. I bought The New iPad in early August and was told that it was the one with Retina Display and it was the top of the line. I cannot find a "New ipad" on Apple's website. In fact, the only iPad with Retina Display is one with the lightning connector. I'm utterly confused and feel very jipped. Can anyone maybe explain to me? Where has the "iPad 3" gone on the website? And will I be able to do a trade for the newest considering I just bought it?
Thanks
KelseyThe iPad 4, which is now also called the iPad with retina display, essentially replaces the iPad 3, which is no longer available except as a refurbished product. The naming is confusing, as both the iPad 3 and iPad 4 had a retina display. The iPad 4 has the same price points but with a fater processor, better Facetime camera, lightning connector, and faster wi-fi. As soon as it came out yesterday, the iPad 3 was removed from the Apple store. It has essentially been discontinued.
People who bought the iPad 3 within the last 14 days can return it no questions asked. There are stories about some stores allowing an exchange for the iPad 4 if you bought the iPad 3 within the last 30 days, but there's nothing official from Apple on that, and it seems to vary from store to store. I called my local Apple store, and they said no, but I'm waiting for a call back from a manager to confirm this.
I think you may be out of luck trying to return or exchange it at the Apple Store, but you can look a selling it and putting the money toward a new model. Here's a link to an article with some info that may help:
http://9to5mac.com/2012/10/24/top-places-to-trade-a-third-generation-no-so-new-i pad-for-cash-or-credit/
Good luck. It's definitely a lousy thing for Apple to do to iPad 3 users. -
Do I need a screen protector for my New iPad with retina display?
I have a screen protector on my new iPad with retina display, but does this effect the screen display and do I really need a screen protector on?
So I just got my first ever iPad (4th gen) about 4 days ago. I am waitng on a case and have been looking into a screen protector, debating this same question on quality. I have a 3 year old and he is dying to play with it. In the meantime I cannot stress how careful I have been, as Im sure you all know what Im talking about. Last night I was using it on my lap and my shirt tugged it off, causing me to grab it before it fell. Of course the longest, sharpest nail, caught it for me. Obviously I freak out and hurry to clean the screen to see for damage. I see there is a huge line where my nail caught it, but upon cleaning was no longer there. This nail was sharper than any key I own! So I guess what im going to do is get a complete cover for use with my 3 year old and just a basic one when I use it. Good job apple!
-
Could I trade or rersell the new iPad for the the iPad with retina display
I went back to the US to visit my dad, and I bought the new iPad Wi-Fi + cellular data 32 gb on early July. I came back to Thailand on mid July and stayed there until now. I heard that the iPad with retina display came out less than a year later after the new iPad. I am planning to back to US around early September. Is there a way I could trade or resell my iPad 3rd gen for the 4th gen when I come back? Thank you
Your only option is to sell the iPad and buy a new one.
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
Cheers, Tom -
I just recently purchase an ipad with retina display it is also my first apply product and I am not liking it. First it won't stay connected to my wifi and it won't pair on my nokia N8 phone via bluetooth. Any suggestion? Thanks!
No one from Apple here - this is a user-to-user forum for the Apple Thunderbolt Display. If you don't like your iPad, sell it.
If you want to ask questions about your iPad, go to the iPad community forum.
Clinton -
Is it necessary to have 64GB for the iPad with Retina display.
I am interested in getting the iPad with Retina Display. I wonder if 32GB is enough, on the iPad 1st generation 16 GB was fine, but with double the resolution I wonder if I should double the size.
Is it worth getting the Retina Display?
Thanks for your inputThe higher resolution is hardly the overwhelming factor that contributes to reduction of storage capacity on the iPad. It is the number of apps, movies, TV Shows and things like that that take up the storage.
I have a 64GB iPad 3 with 170 apps, 2 HD movies, a couple of TV shows, 900 + photos, about 350 songs, several magazines in Newsstand and I have used about 21GB of the storage on the device.
IMO - the retina display is spectacular and well worth it. -
I have NEVER been able to activate my iMessage on iPad with Retina Display - My Apple ID/Password works fine on all other programs. iSO is up to date. No troubleshooting has worked so far. Any tips please?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
What image resolution should use for the new iPad with Retina display?
What image resolution should use for the new iPad with Retina display?
http://www.ipadcasereview.com/ipad-3-cases-and-covers-top-of-page/#sthash.hZKnxH ku.dpbs
these are the best -
My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
IPad with Retina Display (4th Generation) Factory Unlock
I want to buy iPad with Retina Display from apple website but I can choose only 3 carriers provider. I've read that there are actually not lock and I can use any carrier provider I wish. Is that true?. So instance I will buy iPad from apple website and chose AT&T I will be able to use any mini sim card I want? If so why ppl on ebay use terminology Factory Unlock? Thank for your help guys.
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo -
I have a verizon mifi 2200 modem and wonder if an ipad with retina display will connect to it
I have a verizon mifi 2200 modem and wonder if an ipad with retina display will connect with it to use the internet
It should work. Have you tried and it doesn't work?
FYI
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Network printing and Indesign cs3
Since updating to 10.5.3 network printing has not worked with indesign cs3. We are now using 10.5.4. It worked with 10.4.x on the same network. I don't think the printer or the printer driver is the problem but if it matters we are using an hp deskje
-
Time Machine Not backing up home Folder
Time machine is not backing up any of my Home Folder files for ONE of my users. I have two users, one of them gets backed up, the other does not. I have a Mac Pro with all latest updates from Software Update. The machine has 4 HDD's, Mac HD, Home, Da
-
DW error? Links created in CS4 put a slash in front of the filename in html.
To create a link I select the text then choose make link to an html file that is on the same level. When I go to the code the link has been made but the new link has a slash in front of it. For example: <a href="/test.html"> test link</a> I have bee
-
Hi All, I have an object type defined as: create or replace type test_object as object item varchar2(50) , countofitems number(8,0) And I have a table type defined on this object as: create or replace table test_object_table is table of test_object;
-
Commit both parts of a "references" association together
I'm running JDev 11.1.2.3.0. I have an Entity Association between TABLE_A and TABLE_B Entities in a 0..1 -> * references relationship. I will either be creating just a record in TABLE_B or records in both TABLE_B and TABLE_B. When creating records in