Is there any possiblity to not to take the print out before release of PO

Is there any possiblity to not to take the print out before release of PO.
Please give some inputs to set up this in system.

Hi,
Thank you for your reply with kindness.I will appreciate your help.
I found nothing like what you have mentioned .Please find the programme details in my system.Please help in this reagrd.
FUNCTION EXIT_SAPLMEDRUCK_001.
""Lokale Schnittstelle:
*"       IMPORTING
*"             REFERENCE(IX_DRUVO) TYPE DRUVO
*"       EXPORTING
*"             REFERENCE(EX_RETCO)
*"       CHANGING
*"             REFERENCE(CX_DOC) TYPE MEEIN_PURCHASE_DOC_PRINT
*"       EXCEPTIONS
*"              NO_OUTPUT
INCLUDE ZXM01U04 .
ENDFUNCTION.
Even-- nothing is avaialble in Include programme also.Please help in this regard.
What is my further action to this.

Similar Messages

The word "ORIGINAL" is not appearing in the print out of documents

Hi,
For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
Thank you,
eric

Hi Eric,
The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
The solution is to chnge that remarks in the PLD to text "Original".
Cheers

How to take the print out of the entire data from the waveform chart

i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
also how can i take print out of the data between given interval??
please reply me
thank you

There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
Jonathan Hildyard
Applications Engineer
National Instruments
Attachments:
DAQ_with_Print.llb ‏115 KB

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

Is there any possible way I can use the keyboard controls/shortcuts of Microsoft on the Mac version or PhotoShop?

I am very used to using a PC for Photoshop and just recently changed to Mac. I tried plugging in a different but the keyboard shortcuts arent like Windows version

shldr2thewheel wrote:
Since you have a mac, learn how to use Photoshop for Mac and stop thinking about Windows. Time to let go and learn how to use programs for Mac.
This is pretty horrible advice. 95% of Photoshop works the same on Mac and PC. Almost all of the keyboard shortcuts are identical except that Ctrl becomes Command and Alt becomes Option (same key anyway). The menus are all the same.
shldr2thewheel wrote:
Also, when using PS on a Mac, their is no option to enable "windows keyboard mode" in OS X. I know, I have used PS on a PC and currently use it on a Mac. You have no option but to learn how to use it on a Mac. If you are comfortable with Windows, purchase a copy of Windows and run it in Boot Camp or a virtual machine and purchase a copy of PS for windows. Then when in Windows, I believe you can use MS shortcuts.
This is also (mostly) incorrect advice.
If you look in the Keyboard system preference, and you click Keyboard Shortcuts, you will find a shortcut called "Move focus to the menu bar." Once this happens, you can type ahead to menus and commands, much like the alt menu shortcuts in Windows. If you wanted to open the Duplicate command, it would be Ctrl-F2 to activate the menu bar (edit that shortcut if you don't like it), then type I and Enter to drop the Image menu, then type D and Enter to open Duplicate. If there were two D commands, you would type ahead until the letters are different. You can use the spacebar instead of Enter, and Esc does the same as Windows. I just tried all this in CS5 and it works fine. The advantage over Windows is that you do not need to memorize the alt shortcuts, because it's based on the command name you want instead of an arbitrary letter in the middle of the name.
As jasdril said, you can simply edit the direct shortcuts too. But in most cases there should be no need to because as I said, most are the same anyway.
In short, there is plenty of keyboard-driven flexibility there for anyone willing to adapt just a little tiny bit.
The second advice that is not so good is recommending a Windows virtual machine. That'll slow down Photoshop, in addition to using up a lot of RAM and CPU that Photoshop really needs. The Mac version of Photoshop being native, would run at a proper speed.
The last possibly bad decision in this thread is TTro787 deciding to take the Mac back to the store, ignoring a quarter century of history of the Mac as a well-established graphic design and photo workstation. If you don't think the Mac is going to work well for Photoshop, it isn't going to be because of the Mac... the Mac is not just for Starbucks posers. Too many smart scientists (who want to use the Unix-based OS) and competent designers use Macs.
In short there is a whole lot of intolerance and assumed differences in this thread by both Mac and Windows zealots, which is too bad. Photoshop is mostly the same on Mac and Windows unless you're trying really hard to make it not work.

Is there any way in SAPscript to force the printer to staple a job?

Does anyone know how to control the stapler on a fancy printer so that a job printed from SAPscript will be stapled?
Has anyone ever done it? My target is a Kyocera Mita 5035 in this case but any success stories will be helpfull.

SAP has bundled the information needed to answer my question in a couple of zip files with the following names:
ZKM10PRE.zip <- for PRESCRIBE printers
ZKM10PCL.zip <- for PCL printers
The document that explains everything has the title:
New Custom Device Type for SAP R/3
Short Installation Guide / Feature List
and is available upon request from Kyocera/Mita.
website: www.kyoceramita.com
technical support line: (800) 438-6482

Lion, Cloud, Isync, Nokia N95 8GB but not the ICal. Is there any possibility? Hajo from Munich

Hi,
I can sync the address book with my Nokia N95 but not ICal. Is there any possibility? Hajo from Munich

Remove the old and new plugins, delete the device in iSync, then re-install the new one. Finally setup the phone again from scratch via the Bluetooth Setup Assistant, accessed via the Bluetooth system preferences pane.

How can i take out the print out of invoices

i want to see the print preview of billing document and i want to take the print out also
but i m unable to do this
so wat is the navigation to do this please suggest.
regards
subrat

Output of Invoice:
Billing document (Change Mode) : VF02 --> Enter (takes to main screen) --> on the top line Goto --> Header --> Output --> maintain output type --> Enter --> back --> Enter printer (in most cases LOCL) --> Enter & SAVE.
Move out of billing document & revisit Billing Document in change mode(VF02) --> In the initial screen itself, on the top line o to Billing Document --> Output --> Screen / preview > Enter> a screen will pop-up on which printer name is mentioned --> Enter & you will get the preview of Invoice.
To Configure printer, take assistance from basis consultant.
Regards,
Rajesh Banka

My 2008 Macbook froze (though iTunes kept playing), and wouldn't turn off, so I had to take the battery out to turn it off. However, it is not turning on. The battery was in condition of "needs to be replaced soon", but is there any way I can start it up?

Last night, I was listening to a podcast, and my Mac froze. The mouse would not work, and neither would any of the buttons, but the podcast continued to play as if nothing was wrong. I tried to turn it off and on with the power button, but it did not respond. I had to take out the battery and put it back in.
However, the Mac is no longer starting up. The battery was old, and needed to be replaced soon. Because I have three important exams next week, and I have all of my notes on that device, I was wondering if there was a way to get the Macbook to work again, without taking the time to replace the battery? I've tried plugging it in, but it doesn't seem to charge.
Thanks!

Does the unit not run on the charger alone? (take the battery out and plug it in.)
Try an SMC Reset
http://support.apple.com/kb/ht3964

I want the IOS 8 update but apple decided to not give that update to iphone 4 users, IOS 7 didnt make my phone slower. I want the update, is there any possible way of getting that update for the iphone 4??

Is there any possible way ofgetting the IOS 8 update for iphone 4

No. The iPhone 4 is not capable of running iOS 8
If you want iOS 8 then you need to get a newer iPhone that can run it

I was stollen and i used the "Remote Wipe" but i didn't know that it won't be able to locate it anymore. It still hasn't wiped it, as it has not been online yet. Is there any possible way to undo this?

i was stollen and i used the "Remote Wipe" but i didn't know that it won't be able to locate it anymore. It still hasn't wiped it, as it has not been online yet. Is there any possible way to undo this?

First of all i had already blocked it by icloud programm and then after that i received an email of confirmation that it was already blocked. Then i entered in the iCloud programm and saw that the thief it was disconected to not be localized. Do you know that even i had used the Remote Wipe it will work? Because the thief had before the blocked of the phone disconect to not be localized.

Need to take monthly report for SQL statements...Is there any possiblity?

Hi,
We have a requirement to find out the list of expensive sql statements in our ECC 6.0 system.
I am aware that we can see expensive sql statements which are being executed online in the TCode ST04 or DB02old.
But I want the list of statements on a monthly wise.
Is there any possibility to find out the list of expensive sql statements for the previous 3 to 4 months?If so, how do we do that?
Any report or Tcode with navigations.
Please help.
Regards,
Sudheer.

Hi,
> We have a requirement to find out the list of expensive sql statements in our ECC 6.0 system.
nice.
> I am aware that we can see expensive sql statements which are being executed online in the TCode ST04 or DB02old.
expensive SQL in DB02, really?
> But I want the list of statements on a monthly wise.
> Is there any possibility to find out the list of expensive sql statements for the previous 3 to 4 months?
> If so, how do we do that?
Up to now there is no transaction available with such information. The databases partially offer solutions.
These are switched on by default of have to be setup before they could be used. So it depends on the
database and the database version which are you using.
On ORACLE 10g for example we have the AWR (Automatic Workload Repository) which should be switched on by default (depends again on the license). On ORACLE 9i statspack is available but has to be activated first.
On DB6 (latest database and SAP release) we have the so called performance warehouse.
On other databases there might be solutions too.
Besides that you can always built your own solution and grab the top 10 SQL statements from the SQL cache and
persist them in regular intervals. I have seen such solutions as well.
Kind regards,
Hermann

Is there any possible way to see all Log-in information I have used one the web-page (not just passwords, but also a logins used)?

Hi all,
The problem is:
I have been using site at different times from different accounts, and I have used autologin thing.
But when last time I opened the site, for some reason Mozilla automaticly logged in with my very old account.
For some reason in Security -> Passwords - I see only 1 "Login" detail for this site.
Is there any possible way to see all Logins (login information) I have used on this site to log-in?
May be some file folder is recording them?
Thanks

If a password is filled then that can only be done if the password is saved in the password manager. 
If only the name is filled then that can be done by form fill.
*Form History Control: https://addons.mozilla.org/firefox/addon/form-history-control/

Is there any possibility to block emails of subscriptions we are about to create in 2008 (folder level) and enable back the emails once we are done creating the subscriptions

Hi,
We are migrating our Reporting Server from 2005 to 2008 and we have around 3500 timed subscriptions which are scheduled daily/weekly/monthly.
It takes around 1 week to recreate all these subscriptions in 2008 reporting server as we are using C# Code (to get the new subscriptionID from 2008 for further use). In this 1 week the subscription emails will be duplicated as they are sent from both
2005 and 2008 (created) to end user but we can't disable the SMTP for the 2008 report server as there are other projects (separated at folder level) working on it.
The Question here is, "Is there any possibility to block emails of subscriptions we are about to create in 2008 (only to our folder) and enable back the emails once we are done migrating to 2008?".
Regards,
Prabhat Y.

Hi Prabhat Y,
Per my understanding that you are doing the migration from SSRS 2005 to SSRS 2008 and now you are re-creating the 3500 subscriptions in the SSRS 2008, so you want to the new created subscription in SSRS 2008 will be pause and not execute at this time, right?
Generally, we have several method to pause the subscription processing, please reference to details information below:
When you created an subscription, an new Sql Server Agent job will be created too, so you can you can just uncheck the 'enabled' checkbox in the job properties as below to disable the execution of the job,you can also stop the SQL Server Agent Services
manually, all your subscriptions will stop running:
More information, Please reference to:
How to temporarily stop SSRS subscriptions
You can also disable a Shared Data Source, pause a Shared Schedule to pause the subscription processing.
Pause Report and Subscription Processing
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Is there any possibility of connection between QM notifications and the WL in Collection Management?

Dear ALL,
Our duty is to find any possibility to show (and to manage, of course) on the Collection WorkList, not only open items already registered in FI-AR, but also any notification registered under the QM module, bearing in mind that it is not an open item, yet.
Is there any possibility?
Thanks in advance.

in short the answer is no.
You could look at customer disputed objects and using them, but you would need to re-key the data, there is no standard way of transfering data from QM to create a dispute.

Is there any possiblity to not to take the print out before release of PO

Similar Messages

Maybe you are looking for