Is there any power electronic converter models or templates or VIs available in LabVIEW?(WITHOUT Multisim)

I want to to build a speed control of DC motor. for this i need to build a power electronic converter (AC to DC) in LabVIEW. is it possible to model a power electronic converter in LabVIEW like a DC motor?

Hello Ivan,
It looks like in your project you are using both the NI 5761 adapter module and DRAM. We have seen a few cases where certain combinations of DRAM, adapter modules, and FlexRIO FPGA targets in LabVIEW FPGA 2010 have caused some resource overmapping errors of the IODelayCtrl components used in the adapter module and DRAM CLIPs. Due to a bug, certain constraints inside of the CLIP cores are misinterpreted by the ISE compiler causing this overmap error when you switch to LabVIEW FPGA 2010.
This was reported to R&D (# 258076) for further investigation and to create a long term fix. In the meantime, for this specific issue please use the following knowledgebase article to apply a patch to your FlexRIO fixed logic files. This patch updates some of the constraints used by the DRAM to ensure that the Xilinx compiler can properly interpret them. There are more details on your issue in the knowledgebase as well.
Knowledgebase 5E4FNCDP: Error, “Compilation Failed Due to Resource Overmapping,” When Using NI FlexR...
If you do run into any other issues regarding IODelayCtrl components, feel free to reply to this forum topic to let me know about them.
Regards,
Browning G
FlexRIO R&D

Similar Messages

Is there any solution for convert document spreadsheet presentation to images with Office Web Apps?

Hi there!
Is there any solutions for convert document spreadsheet presentation to images with Office Web Apps?

Hi,
As far as I know, there is no build-in feature that convert Office file to image format in Office web app yet.
I'll collect the information, and submit it with internal ways. Then, we could also submit the feedback here:
http://office.microsoft.com/suggestions.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Is there any provesion to convert multiple planned order to one PR

hi,,
i want to know is there any provesion to convert multiple planned orders to one PR .let it may create as different line item in PR. if is there please let me know
thanks in advance
regards
madan

Hi madan,
i dont think there is any way of clubbing multiple planned orders into single PR. Like Taj suggested, you could decrease the number of planned order created thro MRP run by working on different strategies on your lot sizing key / procedure.
Also, i am assuming here that you want to club the planned orders of a single material into a single PR and also it is no way related to different account assignments.
The other way possibly u could do it is, do a Z programme and modify your MD15 transaction. This idea is bit vague, possibly the forum could build on it.
reg
kiki

Is there any problem in converting my 3g phone software version from 3.0 to 4.2.1

is there any problem in converting my 3g phone software version from 3.0 to 4.2.1

yes you can upgrade from 3.0 to 4.2.1 without any problem if it's officially unlocked.

I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them?

I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them or must I do it on another machine?
Kaibil

iPhoto used to support the PCD format up to a few years ago. It's extremely frustrating that Apple decided to no longer support this format and now I'm directed to pay nearly $40 for an app that will (GraphicConverter 9). Did Lemke Software make a deal with Apple so we'd have to pay a premium for a very overpriced converter? And, how are decisions like this supposed to encourage the use of iPhoto?
Apple users already pay a premium to use a Mac. Obstacles like these eventually destroy loyalty to the Apple brand. Just ask Microsoft how their back room deals that exploited their customer base worked out for them.

Is there any way to convert the selected rows to text in javascript??

Hi All,
I have place some word file to indesign cs 5.5 it is almost in one table, i need to separate the text from the real tables, Is there any way to convert the selected rows to text in javascript??
If there is no way to make that, any one can help me to make a script to cut the selected rows and place it in privies pointer of the table to make it independent table and after that convert it to text ?

This insert the rows contents after the table instead of being before:
for (var r = app.selection.length - 1; r >= 0; r--) {
    for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
        for (var u = app.selection[r].rows[t].cells.length - 1; u >= 0; u--) {
            for (var c = app.selection[r].rows[t].cells[u].paragraphs.length - 1; c >= 0; c--) {
                app.selection[r].rows[t].cells[u].paragraphs[0].move (LocationOptions.AFTER, app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset));
                if (c != 0)
                    app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\r";
            if (u != 0) {
                app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\t";
            else {
                app.selection[r].rows[t].parent.parent.storyOffset.parent.insertionPoints.nextItem(app.se lection[r].rows[t].parent.parent.storyOffset).contents += "\r";
for (var r = 0; r < app.selection.length; r++) {
    for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
        app.selection[r].rows[t].remove ();

Is there any way to convert the ImportObject into an image file ?

I have converted a FM document into MIF file format. FM has a grapic imported by copying into the document. In the MIF file I can see the image like the following,
<ImportObject
<Unique 1001019>
<Pen 15>
<Fill 7>
<PenWidth 1.0 pt>
=TIFF
&%v
&II*\x00080000001000FE000400010000000000000000010300010000006009000001010300010000…..
Is there any way to convert the ImportObject inside the mif file into an image file ?

Error 7103,
Regarding Note A and Note B... The Downsample dropdowns list three variations of Downsampling TO, each corresponding to a different downsampling method. When you select one of the Downsampling TO options, then the pixels per inch box allow you to specify the dpi of the downsampled image, the one after the downsampling.
When you select Off, which means do NOT downsample, then the pixels per inch box is meaningless. Maybe it would be a nice interface feature to disable it, but that is another issue. In any event, OFF ignores any value in pixels per inch.
Whenever you import an image into your publishing program (FrameMaker, InDesign, or whatever) and scale it, one can think of the scaled image as having a physical dpi, the number of pixels per physical inch on the "paper." When you specify downsampling in Distiller, the number you specify is most likely less than the physical dpi of the image in the document. It is probably meaningless to specify a number that is larger. I am guessing (and this is a guess) that Distiller does not UPsample images. I have never tested it.
I use 1200 for image recovery.
I assume you are talking about recoverying an image embedded in (copied into) the publishing document. I believe it is sufficient simply to turn downsampling off to create a PDF with the image at the resolution as embedded in the document.
No, one of the settings is to Determine Automatically, which uses the resolution of the image IN the PDF.
Where is that found?
It is NOT in Distiller. It is in Acrobat Professional. (It may or may not be in Acrobat Standard or Acrobat Reader; I do not have them, so do not know.)
The original poster wanted to recover an image copied into a Frame document file. My method is to create a PDF using a Distiller joboption with ALL downsampling and ALL compression OFF. Presumably the image is put into the PDF with all the pixels it has in the Frame file.
THEN in Acrobat PROFESSIONAL, export the image with the setting Determine Automatically. I am presuming (never tested it) this exports ALL the pixels that the image has in the PDF file.
Van

I have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

i have the iphone 4s and i received a video but its in slow motion now is there any way to convert the slow motion to regular speed with my 4s

Only your service provider can unlock the phone. Check with the provided.

Is there any way to convert to MPEG1 with any adobe product?

Is there any way to convert to MPEG1 with any adobe product?

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
Since you have all current products, you might check the forums for Media Encoder or Premiere Pro
http://forums.adobe.com/community/ame
http://forums.adobe.com/community/premiere

HT3775 Is there any program than converts .pvm files to files that can be played by Quick time player?(I own a mac)

Is there any program than converts .pvm files to files that can be played by Quick time player?

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.us there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PCM anymore.

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.is there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PC anymore.i reset my pc and save my iTunes to a hard drive but can't access it.Need help please

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

I've copied my itunes library onto an external hard drive. Is there any way I can do this and delete songs from my PC without also deleting from the external drive? Already lost two songs!!!

I've copied my itunes library onto an external hard drive. Is there any way I can do this and delete songs from my PC without also deleting from the external drive? Already lost two songs!!! I just want a back up - using a work PC and don't want others accessing my songs. Hope someone can help. Thanks!

I see. To get a better idea of what is being stored where please download and run the script iTunesInfo which should output something like this:
I'm interested in the block of 4 results starting ITL location. If your profile name shows up somewhere replace it with <Name>. It is also worth checking under Edit > Preferences > Advanced to see where iTunes thinks your media is supposed to go. My script estimates the setting based on the location of the first media file it can actually find.
tt2

Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~

Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~

No.

Is there any way I can get a past copy of a work plan without performing restoration.

Is there any way I can get a past copy of a work plan without performing restoration. I do not want to perform restoration because if I do so the current version of
the plan will get over ridden. I think if I publish the current version of the plan with a different name and then perform restoration it will not override the current version of the plan.

Jurassic Park --
I do not understand what you are trying to accomplish. Are you trying to create a duplicate of the current enterprise project, but with a different name? If so, there is one pretty simple way to do this. Open the enterprise project and
click File > Save As. In the Save to Project Server dialog, click the Type pick list and select Template. Edit the name for this temporary enterprise template so that it is different from the project name, and then click the Save button.
In the Save as Template dialog, do not select any of the checkboxes and then click the Save button. When the system finishes saving the project as a template, close the project. Now click File > New > Project Server Template. Select
the template you just saved and then click the OK button. You now have an exact copy of your project, ready for you to save and publish. Hope this helps.
Dale A. Howard [MVP]

Is there any off the shelf credit card enryption/decrption tool available ?

Since, Credit Card (CC) processing is very critical , my company is looking for options which are available in the market -ready to use !!!
Is there any off the shelf credit card enryption/decrption tool available ?

What is "credit card encryption/decryption"?
1) Are you willing to encrypt and decrypt credit card numbers in a safe way, to store them in a database?
- JCE and crypto
2) Are you willing to communicate with the credit card companies to perform credit card transactions in a safe way?
- Contact them; there are third-party companies that sell solutions for communicating with Visa, Mastercard etc; the credit card company can tell you what company they recommend
3) Are you trying to validate the credit card numbers (no online processing needed, just validate the card numbers in Javascript)
- search for Luhn's algorithm

Is there any power electronic converter models or templates or VIs available in LabVIEW?(WITHOUT Multisim)

Similar Messages

Maybe you are looking for