¿Is there any problem to use Nightly version of Firefox as default browser?

I am testing the Australis theme of Firefox and I like it so much that I want to use it as my default browser, instead of the Firefox stable version.
Is there any problem related to security with doing that? I know this version isn't stable at all, but this does not matter for me right now.
Thank you very much! :)

Note that the Nightly build gets updated daily (and sometimes more than once in case of a respin) and it is always possible that something goes wrong and it doesn't work properly, so be prepared for issues if you decide to stay with the Nightly build and make sure to have the current release with its own profile installed as well in case of problems.
See also:
* http://kb.mozillazine.org/Testing_pre-release_versions
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
*http://kb.mozillazine.org/Shortcut_to_a_specific_profile
*http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Similar Messages

  • Is there any problem to use multiple threads to send email with JavaMail

    Dear all,
    I am using JavaMail 1.3.2 to send emails with SMTP, it works very well for a long time.
    But one day, I found that the email service hanged and I could never send email again until I restart the tomcat. I found that the reason was a deadlock had been created, the required resource for sending email had not been released.
    I guess the error is due to multiple threads are sending email at the same time. I made a test to create seperate thread for sending each email. After few days, I found this deadlock happened again. So, my question is: Can I use JavaMail with multiple threads? If not, I may need to sychronized all the thread that using JavaMail. I would like to make sure this is the reason for causing the deadlock problem.
    Here is part of my code for using JavaMail:
    transport = session.getTransport("smtp");
    transport.connect(email_host, smtp_user, smtp_pass);
    message.saveChanges();
    transport.sendMessage(message,message.getAllRecipients());
    which is very standard call, and it worked well for a long time.
    Here is part for my thread dump on tomcat:
    (Thread-339)
    - waiting to lock <0x5447c180> (a sun.nio.cs.StandardCharsets)
    (Thread-342)
    - locked <0x5447c180> (a sun.nio.cs.StandardCharsets)
    It seems that these happened after call the method transport.sendMessage() or message.updateChanges()
    , and the underlying implementation may require the JRE StandardCharsets object. But the object had been locked and never be released. So, the sendMessage() or updateChanges() can't be completed.
    Please give me some helps if you have any idea about it.
    Thanks very much!
    Sirius

    Note that the Nightly build gets updated daily (and sometimes more than once in case of a respin) and it is always possible that something goes wrong and it doesn't work properly, so be prepared for issues if you decide to stay with the Nightly build and make sure to have the current release with its own profile installed as well in case of problems.
    See also:
    * http://kb.mozillazine.org/Testing_pre-release_versions
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    *http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    *http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • Are there any problems of using Connections other then HTTPConnectoin?

    Hi,
    I have tried to use datagram connection with the following code:
    DatagramConnection c = (DatagramConnection) Connector.open("datagram://localhost:10000");
    when i use the midp to test it, it gives out error message like:
    javax.microedition.io.ConnectionNotFoundException: The requested protocol does not exist datagram://localhost:10000
    Am i missed to setup some things?
    P.S. I am using midp and cldc version 1.0.3 and palm emulator

    the midp specification (http://java.sun.com/j2me/docs)says that only http-connection is mandatory, kvms and devices can provide the other connection types specified too.
    the reason for this is that http is the only protocol of the given, that runs on a certain level of abstarction.
    So device manufactors are not bound to a physical protocol such datagram/socket connection. How http transmissions happens depends on the kvm and the device specs.
    If you develop for a certain product category, where you know that the devices all implement datagram transmission you can do it, otherwise its recommendet do use only HTTP.
    MIDP for Palm does not implement a datagram protocol actually (http://java.sun.com/products/midp4palm/faq.html#Q5)

  • Does Firefox use Internet Explorer in any way? When I go to CCleaner to delete history, there are always IE files as well as Firefox, my default browser and I don't use IE. It doesn't make sense to me, but then, I don't know much.

    I don't know what I can add... thanks for any help.

    Firefox itself does not use the IE temporary internet files location, but some plugins will save data to the same place as IE.

  • I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    The warranty for the iPhone is not and has never been International.
    Warranty and support are ONLY valid in the country of origin.  The only exception is the EU where the entire EU is treated as one country.
    If the device will be used in India, buy it in India.
    An unlocked iPhone will work on any supported GSM carrier world wide.  The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

  • I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

    I want to upgrade the IOS of my Cisco 2821 from  Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
    Thanks

    CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
    That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
    You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
    Brandon

  • Are there any problems using a back cover.

    I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

    Is it  ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

  • Are there any problems using an ipad imported to the UK from korea?

    Are there any problems buying an Ipad in South Korea to use in the UK?

    Me too - its a possible gift and (like most things) iPhones are cheaper in the states than in Canada.  
    I'm assuiming these phones are universal.  But i'd rather know before buying. 
    Thanks

  • Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too.  Thanks Dave UK

    Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too.  Thanks Dave UK

    Do you mean Office 2008 and 2011 or do you really want Office 2001? I think you mean 2011 since Office 2001 wouldn't make much sense.
    The Office uninstaller should be able to identify there are two versions and allow you to delete either one or both.

  • Is there any problem in converting my 3g phone software version from 3.0 to 4.2.1

    is there any problem in converting my 3g phone software version from 3.0 to 4.2.1

    yes you can upgrade from 3.0 to 4.2.1 without any problem if it's officially unlocked.

  • Using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

    using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

    I had this same thing happen to me.  I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen. 

  • Is there any way to use -useLegacyAOT option in FlashBuilder 4.6?

    I need to build my ipa with old version of Engine because i have some problems about loading images from outside. Since with Air 15 it is default engine, and i cannot quit Air 15 because of the iTunes specs. I cannot add -useLegacyAOT=yes to compiler options on Adobe Flash Builder 4.6 because it seems that it can be added at FB4.7.
    So is there any way to add this options when i am using FB4.6
    Thanks in advance.

    DeepakJ wrote:
    Hi,
    Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
    Is there any way to modify the SQL query.
    SQL
    select dept, loc, count(*)
    from dept
    group by dept, locOutput-1
    Dept      Loc       Count(*)
    10         AA        1
    10         BB        2
    10         CC        2
    20         AA        2
    20         BB        2Output-2
    Dept      Loc       Count(*)
    10         AA        1
    BB        2
    CC        2
    20         AA        2
    BB        2
    Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
    select
        nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
      , nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
      , e.mgr
      , count(*) n
    from
        dept d
          join emp e
            on d.deptno = e.deptno
    group by
        d.deptno
      , d.loc
      , e.mgr
    order by
        d.deptno
      , d.loc
      , e.mgr nulls first;
    DEPTNO  LOC       MGR   N
        10  NEW YORK         1
                      7782   1
                      7839   1
        20  DALLAS    7566   2
                      7788   1
                      7839   1
        30  CHICAGO   7698   4
                      7839   1
        40  BOSTON    7698   2
                      7902   1

  • Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

    I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
    Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
    I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
    Thanks
    Paul

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
    tag. This not only gives points to the posters, but points anyone
    searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...

  • Is there any problem about 10I oracle connect to 9I oracle  in BW

    we want to know about
    creating a new source system on BW in AIX pointing to an Oracle
    database, bw oracle use 10i database , connect to
    9idatabase(Windows) to get data for BW,
    can you tell me how 10I oracle connect to 9I oracle ??
    is there any problem about 10I oracle connect to 9I oracle ??If
    there exit problem ,how to deal with it ??
    Thank you
    ALLEN ZHOU

    Hi
    You may face some problem in BASIS side especially if one version is Open SQL and other in Old SQL
    Regards
    N Ganesh

  • Are there any problems with Snow Leopard Server (Xserve) and PPC Clients

    Hi,
    are there any problems identified yet with Snow Leopard Server, installed on a Xserve and PPC Clients running Mac OS X Tiger and Leopard?
    Currently I have a Xserve Intel running Leopard Server and about 12 Mac Minis PPC running Mac OS X Tiger and Mac OS X Leopard. The Xserve serves services like DNS, OpenDirectory, Software Update Server, NetBoot, etc. All users have Home Directories stored on the Xserve.
    Now I want to install Snow Leoaprd Server on the Xserve, but I wonder if there are any problems using the PPC Clients? I have read something like this on a german website.
    Thanks!

    We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

Maybe you are looking for

  • Resetting Develope settings to a group of photos all at once...

    How do I do it?

  • Pls send some usefull doc related to CO

    MODERATOR:  Do not post your email address or links to copyrighted information on these forums.  If you do, the thread will be LOCKED and all points UNASSIGNED.  If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.s

  • Error when applying Maintenance Pack upgrade from 10.3.1.0 to 10.3.3.0

    I'm using smart update util to upgrade my 10.3.1 weblogic installation. In Oracle Smart Update util I selecte Maintenance Packs->Update and it bring up a BEA Smart Update application which finds 10.3.3.0 as the upgrade option. After selecting this op

  • CALL Transaction 'MIRO' return error messages in MESSTAB

    Dear All, We have created a test function module to call transaction 'MIRO', the function works fine on one server but the same give error messages on other server. The messages returned by call transaction is as follows =============================

  • RAC OCCI connectString

    Dear all, Recently i have set up a 2-node RAC environment, and i will put the my application on the local host. The rac database global name: agdb.world, the 2 instances respectively are agdb1 and agdb2. i also use the DBCA to create a service name a