Is there any process flow diagram for TFS 2013 ?

Hello,
I require to know the reference link of lfow chart to manage work in TFS that indicates following details :
Define sprints and backlog items
Creating tasks and complete them.
I want to know whats the flow chart that indicates the states of updating PBI/Bug/Tasks for whole team in project.
Can anyone please help me on that ?
Thanks and Regards,
Dipti Chhatrapati

Hi Dipti,
Great to hear it was helpful.
You can use PBI flow similar to user story flow. State values are bit different.
User Story it is New-->Active-->Resolved-->Closed and Removed (Removed from backlog).
PBI New -->Approved-->Committed-->Done and Removed (Removed from backlog).
For PBI use the User story flow in below manner would be OK
PBI New - User Story New
PBI Approved - User Story New (Team can work on this , work on this in a Sprint)
PBI Committed - User Story Active/Resolved (Team made commitment) for PBI assigned person if developer then still in development, if assigned to QA then QA verification going on once QA done assign to PO)
PBI Done - User Story Closed - Confirmed by PO
Cheers!
Chaminda

Similar Messages

3D process flow diagram

Hello all,
I need to create the process flow diagram for air handling unit consist of motors,pumps, AC rooms in 3D. I never worked in 3D graphics before. Very confused from where to start and how to start.
Suggess me some direction.
Thanks
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Hi unclebump,
No i dont have any 3D model to import to labview. But i downloaded some VRML files & called to labview through load vrml files.
I need to create everything from scratch. Any suggestion.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

FICO standard process flow diagrams

Hello,
Can anyone provide me any documentation or link for standard SAP FICO process flow diagrams?
I even looked at SAP Best practices but could not find any FICO specific process flow diagrams there.
Thanks and regards
Kedar

Hi,
These is related costing
http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_overview_03_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_overview_04_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_overview_05_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_overview_06_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_overview_07_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_overview_08_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/184_Scen_overview_EN_MY.ppt
http://help.sap.com/bp_bl603/BBLibrary/Documentation/185_Scen_overview_EN_MY.ppt
http://help.sap.com/bp_bl603/BL_MY/Html/scope/Scoping_offline_SC.htm?display=STE- L_MY_V1603+ENTRY_LEVEL_FINANCIALS.xml
regards,
Santosh kumar

Batch Management Process Flow Diagrams

Hi,
please provide the process flow diagram of batch mangement in MM.
any links or documents....
It's urgent...
Thanks
AK

Logistics general - Batch Management
1.1. Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
1.2. Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
1.3. Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
1.4. Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
1.5. Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
1.6. Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
1.7. Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
1.8. Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
1.9. Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
1.10. Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
1.11. Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
1.12. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
1.13. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
1.14. Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
1.15. Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
1.16. Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
1.17. Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
1.18. Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
1.19. Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
1.20. Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
1.21. Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB

WM process flow diagram

Can anybody help me to get process flow diagram of any standard WMS in SAP?
I appriciate your help
Thanks,

HI ,
Refer the general scenario followed most commonly in WM,
A) IN MM At the time of good receipt MIGO
1.creation of transfer requirement takes place. Material Goes to Interim Storage type (902)
2. Transfer order from TR is created ( we get destination storage type) -- In LT04 or LT06
3. Confirmation of TO.(Put away completed ) In LT12
B) IN PP
1. Requirement we get from MD11,MD04,CO01.(staging , BOM Explosion etc.)
this time Generally TR, will be created Automatically( As per setting).
With LB10 TR to TO
TO will be confirmed in staging process.(Quantity of picked materials will be reduced )
(Hear the raw material will be consumed. & TR for finished material will be created.)
With LB10 we can perform creation of TO.
TO for finished material will be confirmed when it will placed in the destination Bin.
Hear we will get the Finished good in the Unrestricted stock.
C)IN SD.
Creation of sale order: VA01
Creation of Outbound deliveryu2019s TO. VL01
TO confirmation after reaching to destination.LT03 then LT12 to confirm.
Dev.

Is there any exit or badi for "F-59"?

Hi,experts,
is there any exit or badi for "F-59" after "SAVE"?
Thanks in advance.

Hi ,
You can search an exit for your program by using:
CALL CUSTOMER statement ,it will give you all the function
exits in your program and then in their included you can set a breakpoint
and check which one gets triggered while the save option or
You can also search a BADI for any particular transaction ,
for that first go to T-Code-SE24 and give
the Object Type as CL_ExitHANDLER.
Then double click on to Get_Instance Method and set
a brakpoint on the line:
CALL METHOD cl_exithandler=>get_class_name_by_interface.
Next step is to execute your T-Code f-59.
It will go into debugging mode.
Start debugging by writing EXIT_NAME in the checking area while debugging.
This EXIT_NAME will give the BADI'S used with each screen processed.
Hope it helps
Regards
Mansi
Edited by: MANSI ASNANI on Mar 25, 2009 7:06 AM

Process Flow Diagram

Can someone provide me with a process flow diagram and the step for creation of returnable packaging ?
Thanks
Logi

Hi,
For returnable pacaging,you have to create a material with "LEIH" material type.
Pls go through the following link for process flow daigram:
[Process flow for LEIH material type|http://help.sap.com/bp_bl603/BBLibrary/Documentation/155_Scen_Overview_73_EN_PE.ppt]
Pls go through the following link for process flow of shipping:
[Process flow of shipping|http://help.sap.com/bp_bl603/BBLibrary/Documentation/107_Scen_Overview_EN_US.ppt#488,1,Sales Processing Using Third Party (with Shipping Notification) SAP Best Practices Baseline Package (U.S.)]
Hope this is what you are looking for.And this will help you also.
Regards,
Krishna.

IS THERE ANY PROCESS IN ASSET REVALUATION

hi sap guru's,
       we are facing a problem for ex
           we purchased a asset in 2003 for value 1cr 80lck. but the same value entered in the books is 2cr. Now we want to reduce the price of that asset in our books. Is there any process to do the revaluation.
         Kindly suggest me how to reduce the value and give me the steps or any document.related to it.
it's very urgent please help us.

Hi,
If there is only one asset which has problem, you may think of following transaction.
ABAW - Balance Sheet Revalation
You need to work out following for ABAW transaction.
1) Amount to be reduce for Acquisition Cost.
2) Do you want to adjust Acc Depn till previous year as well .. Work out the value of acc depn.
3) Default Trans Type is 800 which debits the asset i.e. revalues Asset to higher value. If you have to credit the asset i.e. reduce asset value, use Trans Type which credit.
Check following in the customizing:
IMG : Fin Acct --> Asset Acct --> Special Valuation --> Define Transaction Type for Revaluation.
1) Select T type 800. It is configured for Debit Posting. Check other T Type which are configured for credit posting for revaluation.
2) Check which depreciation area, revaluation to be posted. Add the depreciation areas for this tranaction type posting.
Hope this helps. If helpful, pls. assign points.
Regards,
Chirag

Is there any process\service which can modify and count a Global fragment in a form(xdp)

Hi,
Is there any process exist which can count number of fragments or modify a fragment in a form (either in pdf or xdp).
Regards
Sunil Gupta

no there is no activity or process because global fragments are used in adobe lc designer for developing a form. when a form is created as a document then no concept of global fragment left. it gets embedded in form
regards

AVCD on MAC: are there any processing problems using say, VLC?

AVCD on MAC: are there any processing problems using say, VLC?

We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

OFSAA CRM ERROR 16616 - Are there any list of errors for consult

Hi gys
OFSAA CRM ERROR 16616 - Are there any list of errors for consult about CRM ?
regards
Daniel Daniele

@chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
...the other folders did copy okay though!
It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
@ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
@alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
Thanks for the help!
(pre-post) UPDATE >>> I've just mounted my Windows partition in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Is there any BTE or Badi for Vendor Outgoing payment posting

Hi Experts,
My client who want the bank commission deduction at the time of vendor outgoing payment on the net values. the bank commission is fix of Rs. 0.07 Paise Per Rs. 1000/-
The scenario is as below:
Client who deduct the deduction at the time of Invoice for e.g. can bhade, Sanstha anamat , Prakriya Kharch ,Vahtuk Bhade, Share anamat etc. this deduction are directly update the Accounting GL .
after that the client pay the vendor dues amount. in this they deduct some deduction through Account (FI) (E.g. Sanstha Audit fee, Shikshan fund, machine anamat) & After deducting the Accounting deduction they calculate bank commission on the net amount (Invoice amount - FI deductions = Net amount)
Dear Expert, Please help me to work out this problem. in sap at the time of invoice we deduct the deduction as per client required & get the vendor due amount properly.
but at the time of vendor outgoing payment i had done the FI side deduction manually but i can't get the bank commission on the net dues amount. client required automatic bank commission deduction on the net amount.
is there any BTE or BADi for Vendor outgoing payment?
Please help me to workout this issue.
Warm regards,
Dhananjay Rahane.

ok

Is there any difference viewer software for reports??

Hi,
Is there any difference viewer software for viewing differences between two oracle reports??
Thanks for ur suggestions!
Madhu

Any version control software, like CVS, allows for line-to-line comparison of different versions of the same file. The problem with reports is that to understand differences you need to save the reports in human readable format that can be REX-file.

Is there any third party software for itunes that will do this:

Is there any third party software for itunes that will organize the browser window. Ideally I would like the third browser window (album name) organized by "main albums" "compilations" "bootlegs" "singles"
It would look like this for the Beatles
Main
1963 Please Please Me
1965 Help
etc.
Compilations
1970 Red Album
1990 Greatest Hits
etc.
Bootlegs
1985 Ultratrax 1
etc.
CD Singles
1999 Whatever
This info would be marked on either the info or option tab when labeling.
If this has not been made, one of you nerds should make it, it would be great and you could charge $3 for it and I buy it. and so would 100,000 other people.

If you haven't already, try looking through the Apple Downloads specifically for iTunes.
http://www.apple.com/downloads/macosx/ipod_itunes/
There might be something there that is at least similar to the app your looking for.
edit: There is one shareware that is an iTunes plugin called Multi-tunes. With it you can create multiple iTunes libraries, one library called "Main" one called "Bootlegs" etc, and Multi-Tunes will allow you to quickly switch between them from within the iTunes window. Not exactly what your looking for but close.
http://www.apple.com/downloads/macosx/ipoditunes/multitunesdavidcaldwell.html
Message was edited by: Zookalicious

Is there any process flow diagram for TFS 2013 ?

Similar Messages

Maybe you are looking for