IS THERE ANY PROCESS IN ASSET REVALUATION

hi sap guru's,
       we are facing a problem for ex
           we purchased a asset in 2003 for value 1cr 80lck. but the same value entered in the books is 2cr. Now we want to reduce the price of that asset in our books. Is there any process to do the revaluation.
         Kindly suggest me how to reduce the value and give me the steps or any document.related to it.
it's very urgent please help us.

Hi,
If there is only one asset which has problem, you may think of following transaction.
ABAW - Balance Sheet Revalation
You need to work out following for ABAW transaction.
1)  Amount to be reduce for Acquisition Cost.
2)  Do you want to adjust Acc Depn till previous year as well .. Work out the value of acc depn.
3)  Default Trans Type is 800 which debits the asset i.e. revalues Asset to higher value. If you have to credit the asset i.e. reduce asset value, use Trans Type which credit.
Check following in the customizing:
IMG : Fin Acct --> Asset Acct --> Special Valuation --> Define Transaction Type for Revaluation.
1) Select T type 800.  It is configured for Debit Posting.  Check other T Type which are configured for credit posting for revaluation.
2) Check which depreciation area, revaluation to be posted.  Add the depreciation areas for this tranaction type posting.
Hope this helps.  If helpful, pls. assign points.
Regards,
Chirag

Similar Messages

  • Is there any process to retrieve DELETED DATA in any stage either PO,GR,IR

    is there any process to retrieve DELETED DATA in any stage either PO,GR,IR >????

    It is normally quite difficult to physically "delete" PO, GR and IR. GR and IR are canceled, which means both the original document and the cancellation document can be found in the system.
    PO's get the deletion flag on the items (the trash bin) and also can still be seen in the system.
    Physical deletion of objects from SAP can only be achieved by "archiving". If archiving has been set up properly, you can later view the archived objects. If not, they are gone.
    BR
    Raf

  • Is there any process\service which can modify and count a Global fragment in a form(xdp)

    Hi,
    Is there any process exist which can count number of fragments or modify a fragment in a form (either in pdf or xdp).
    Regards
    Sunil Gupta

    no there is no activity or process because global fragments are used in adobe lc designer for developing a form. when a form is created as a document then no concept of global fragment left. it gets embedded in form
    regards

  • AVCD on MAC: are there any processing problems using say, VLC?

    AVCD on MAC: are there any processing problems using say, VLC?

    We've actually found that the Server 10.6.3 DVD does an amazingly smooth job of upgrading 10.5.8. We've been upgrading our production servers and nothing has gone wrong yet. Snow Leopard employs an archive and install method of upgrading which results in an install which is very close to a clean install. So it's been very convenient for us because our servers are used as Windows PDCs and it's a pain in the *** to have to re-join all PCs to the domain if we start from scratch.

  • Is there any process to convert an value-based hierarchy to level-based one

    Hi Experts,
    Is there any automated or manual process to convert the value-based hierarchy to the level-based hierarchy.
    Thanks
    VR

    Using SQL's "CONNECT BY" clause and PL/SQL programming we can convert a value-based hierarchy to a level based. I have not done this myself but I am positive we can get it to work.

  • Is there any process to make iviews as user specific visibility?

    Hi all,
    I had an application on the portal.Is it possible to make it visible only for some users only .I know it can be made it by using 2 different roles.But I want to use the same role as the rest of the applications are common for everybody.Is there any possibilty making iviews as user specific visible?
    thanx and regards,
    rajesh

    there is nothing like user specific visiblity.you have only role based display which you are aware .
    or you can set the permissions to that iview by giving the username to whom u want to give the access

  • Domain Replication Issue. Is there Any Process can be monitored in task Manager which is responsible for REPLICATION?

    Hi,
       There is an issue with Secondary domain controller replication. I am interested in the "Windows Process" which is responsible for Replication.
      We have a 3rd party tool in our project which generate alarm when a windows process in not running(configured).
    I believe  Remote Procedure Call (RPC) is used to replicate data and is always used for intrasite replication. But How to find out which RPC is responsible? or any other windows process is responsible?
    Is it possible to find out "Replication problem" by just monitoring "Responsible Windows Process" ? ( process is running or not running)

    Hello,
    have you already seen
    http://technet.microsoft.com/en-us/library/cc772726(v=ws.10).aspx#w2k3tr_repup_how_dgvt
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • HT204370 If you got stooped into buying a similar title is there any process to get a refund

    Sad when I trying to buy a movie for my grandchild and it turns out to be a spoof
    Even worse she wasnt happy immediately noticIng it was a fake even at three years old.
    Watched only 5 minutes and she even couldn't watch any more.
    Any way to get a refund? At the very least I mentioned all this in review.
    It was puss n boots movie and had puss n boots name in title.
    Thanks in advance for your knowledge

    You can most definitely get a refund since the item was not as described. Email iTunes Support: http://apple.com/support/itunes/contact/

  • Is there any process of identifying

    hi,
    sap gurus,
    good morning
    my client wants to capture the gross weight and net weight of the truck thru weigh bridge which is
    located inside of the company premises.
    i came to know that it is possible only thru transportion module
    but
    we can capture frieght cost into sales order or billing documents
    but
    what about the weight from weigh bridge.
    do i need to ask an ABAPER to write any coding........?
    plz help me on this
    id is timmampalliattherateofgmaildotcom
    regards,
    balaji.t
    09990019711

    The brute force method:
    Can't you use another analog input channel and capture the excitation voltage?
    Or if you have a shaker with an amplifier that provide a current monitor output you can capture the excitation current and might find that due to the voltage control some amount of force is still introduced after setting the control voltage to zero   and you might have to implement a system model that include the shaker and the output impedance of your amplifier :0
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • Is there any process for the intializing the deltas for the purchasing da

    Hi,
    I need how can we intialize the delta process for the purcahsing data. that is 2LIS_02_SCL and 2LIS_02_ITM data sources.
    Please help me out this issue.
    Points will be awarded.
    Thanks in advance.

    HI
    Go to Transaction LBWE (LO Customizing Cockpit)
    1). Purchase Logistics Application
    Purchase BW
    Extract Structures
    2). Select the desired Extract Structure and deactivate it first.
    3). Give the Transport Request number and continue
    4). Click on `Maintenance' to maintain such Extract Structure
    Select the fields of your choice and continue
    Maintain DataSource if needed
    5). Activate the extract structure
    6). Give the Transport Request number and continue
    Next step is to Delete the setup tables
    7). Go to T-Code SBIW
    8). Select Business Information Warehouse
    i. Setting for Application-Specific Datasources
    ii. Logistics
    iii. Managing Extract Structures
    iv. Initialization
    v. Delete the content of Setup tables (T-Code LBWG)
    vi. Select the application (01 u2013 Sales & Distribution) and Execute
    Now, Fill the Setup tables
    9). Select Business Information Warehouse
    i. Setting for Application-Specific Datasources
    ii. Logistics
    iii. Managing Extract Structures
    iv. Initialization
    v. Filling the Setup tables
    vi. Application-Specific Setup of statistical data
    vii. u2013 Perform Setup (T-Code OLI*BW)
    Specify a Run Name and time and Date (put future date)
    Execute
    Hope it helps
    Check the data in Setup tables at RSA3

  • Is there any process to create a gl a/c in cash journal for credit.

    Dear sap guru's,
    Please suggest me in this issue. In cash journal we create a gl a/c ie EMPLOYEE WELFARE A/C.
    But my user wants. the same gl a/c for credit also.
         RIGHT NOW WE CAN USE IT ONLY FOR DEBIT,BUT WE REQUIRE FOR CREDIT ALSO
    Please it's urgent.
    Regards,
    Maruthi.

    In FBCJC2 set up the business transaction as type R (revenue) and then enter on the receipts tab in the cash journal
    regards
    Mark

  • Is there any process flow diagram for TFS 2013 ?

    Hello,
    I require to know the reference link of lfow chart to manage work in TFS that indicates following details :
    Define sprints and backlog items
    Creating tasks and complete them.
    I want to know whats the flow chart that indicates the states of updating PBI/Bug/Tasks for whole team in project.
    Can anyone please help me on that ?
    Thanks and Regards,
    Dipti Chhatrapati

    Hi Dipti,
    Great to hear it was helpful.
    You can use PBI flow similar to user story flow. State values are bit different.
    User Story it is New-->Active-->Resolved-->Closed and Removed (Removed from backlog).
    PBI New -->Approved-->Committed-->Done and Removed (Removed from backlog).
    For PBI use the User story flow in below manner would be OK
    PBI New - User Story New
    PBI Approved - User Story New (Team can work on this , work on this in a Sprint)
    PBI Committed - User Story Active/Resolved (Team made commitment) for PBI assigned person if developer then still in development, if assigned to QA then QA verification going on once QA done assign to PO)
    PBI Done - User Story Closed - Confirmed by PO
    Cheers!
    Chaminda

  • If v delete data contants in ODS,is there any process to refill?

    hello all
    one of my colleague had been deleted data contents(right click on ods)by mistake? now how to refill it?
    Will the data will get deleted in active table only or it will get deletd in change log also?
    Pl let me know
    cheers
    balji

    hi pradip
    thanks
    but here the case is v have 2 ods objects <b>ods1</b> and <b>ods2</b>, <b>ods1</b> loads to <b>ods2</b>?
    <b>While v load from ods1 to ods2 will the data will come from PSA or directly it will come from ods1?</b>
    now the <b>ods2</b> data has been <b>deleted</b> and i think data will not post from <b>psa to ods2</b>?
    now can i reconstruct ods2 object.
    cheers
    balji

  • Help Is there any way to fix my iPhone 3G tilt/Accelerometer ?

    I know that iPhone 3G is an old device! But i can use it because my uncle gave it to me.
    So iam looking for a solution to fix my tilt/Accelerometer, because its offbalanced
    when iam listening to music it automatically rotates at left, same as viewing photos,playing games.
    My tilt is unbalance coz its tilting itself at left even iam holding it properly.
    So is there any Process or app that i can use to fix or to calibrate my tilt??
    Thanks! Sorry for bad english.

    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Is there any way to hook into the SQL report pagination process?

    I have a SQL report (based on EMP) with a radiogroup row selector.
    The scenario 1 and 2 are in place
    1) When the employee row radio group is clicked the P900007_JOB the text item is populated with the JOB for the employee.
    2) When the page is initially displayed or submitted via the button the first row’s radio group is programmatically clicked and therefore populates the additional job information in P900007_JOB
    Info (radio Group) Employee No Name
    (+) 7369 SMITH
    () 7499 ALLEN
    () 7521 WARD
    P900007_JOB CLERK
    1-3 Next>
    Once the report has been displayed and the next or previous pagination is used then none of the radio groups will be selected and the data in the P900007_JOB text item will still display the job of the last selected employee row.
    What I require is on pagination some sort of mechanism to either
    a) Call the page_init() that should then set the first row as selected and populate the text item via the programmatic click. (preferred option)
    b) OR blank out the additional text item P900007_JOB.
    Is there any way to hook into the pagination process?
    I have a work around – Set the ‘Enable Partial Page Refresh’ to ‘No’ but this means a full refresh every time the pagination is used.
    Details of my page
    Report Region (Based on EMP table) – radio group as a row selector
    select     APEX_ITEM.RADIOGROUP(1,EMPNO,'X21',null) CHECKRG, EMPNO,
         ENAME,
         JOB
    from     EMP
    Report Attributes -
    Report template :- P900007_ROWTEMPLATE (custom template see later)
    Report Attributes Substitution :- id="emp_report" (used in page_init see later)
    Enable Partial Page Refresh :- Yes
    Columns – All columns are selected as show but job is left out of the template below.
    P900007_JOB - Text item in report region (disabled does not save state). Populated with the employees job when the radio group is clicked.
    Control region :- HTML region that just holds a button <GO> just to submit the page and redirect back to the same page.
    P900007_ROWTEMPLATE (named column row template)
    Row template 1
    <tr style="cursor: hand; cursor: pointer;" onmouseover="row_mouse_over(this, 1)" onmouseout="row_mouse_out(this, 1)" #HIGHLIGHT_ROW# ">
    <td class="t15data" onclick="selectRow('#JOB#');">#CHECKRG# </td>
    <td class="t15data">#EMPNO# </td>
    <td class="t15data">#ENAME# </td>
    </tr>
    Before rows
    <table class="t15standard" summary="" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#" >
    <th class="t15header" #ALIGNMENT# >Info</th>
    <th class="t15header" #ALIGNMENT# >Employee Number</th>
    <th class="t15header" #ALIGNMENT# >Name</th>
    After Rows
    <tr>
    <td colspan="99" class="t15afterrows">
    <span class="left">#EXTERNAL_LINK##CSV_LINK#</span>
    <table style="float:right;text-align:right;" summary="pagination">
    #PAGINATION#</table>
    </td>
    </tr>
    </table>
    *Javascript in page Header*
    <script src="#WORKSPACE_IMAGES#apex_show_hide_region.js" type="text/javascript"></script>
    <script language="JavaScript" type="text/javascript">
    <!--
    function selectRow(pJob)
    /* console.log('pete got here!'+pJob)*/
    $x('P900007_JOB').value =pJob;
    /* Start Page init*/
    function *page_init*()
    /* Used to set radio groups on reports */
    /*console.log('START pete got here!');*/
    var is_checked = false;
    var l_check = $x_FormItems($x('emp_report'), 'radio');
    /*Loop and set flag if checked*/
    for(var i=0,len=l_check.length;i<len;i++)
    if(l_check.checked){
    is_checked = true;
    /*end loop*/
    /*If none checked force a click*/
    if(!is_checked){
    /*no longer need as doing click below*/
    l_check[0].checked=true;
    /*Force a click on the first radio group - extra details should then be
    populated*/
    var l_click = l_check[0].click();
    /* console.log('END pete got here!');*/
    /*END page_init*/
    // -->
    </script>
    *Application shared component.* – This fires a DB packaged procedure when the page is loaded.
    P330_PART_NO_HIST
    Process Point On load after Body region
    Process Text show_hide_memory.part_no_history_details();
    *Packaged Procedure* – This kicks off the page_init javascript in the header (earlier) to click on the radio group in the first row.
    PROCEDURE part_no_history_details AS
    BEGIN
    htp.prn('<script type="text/javascript">' || CHR(10));
    htp.prn('<!--' || CHR(10));
    htp.prn('page_init();'|| CHR(10));
    htp.prn('//-->' || CHR(10));
    htp.prn('</script>' || CHR(10));
    END part_no_history_details;
    Thanks Pete
    Edited by: Pete @ LSC on 26-Jan-2010 06:56

    Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
    There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
    wwv_flow.g_flow_current_min_row
    wwv_flow.g_flow_current_max_rows
    wwv_flow.g_flow_current_rows_fetched
    wwv_flow.g_request
    Thanks Pete

Maybe you are looking for

  • How can i use my purchased game in new apple id

    I purchased some apps by my apple id ,but unfotunately i have some problem that why i changed  another apple id in my device .after that i cant synchronise & run...how can i use those purchased apps in my different id?????

  • PO user exit for payment terms release strategy

    Hi friends, My requirement is to any changes to Payement terms in PO should trigger the re-release of the po.... Plz. explain... How to proceed... which user exit i have to use........ Thanks in advance, Navin.....

  • Booting ISO from Grub2 without Loopback support

    I am trying to boot an archlinux install ISO from grub2 menu, but I have no loopback support.  I am not sure how I got to this point, but I installed Ubuntu first (just to test out the system and make sure that UEFI works fine.  Then I booted the ISO

  • About archiving messages in XI

    1. what is archiving in xi? 2. why do we need to archive the messages in sap -XI? 3. could anybody send me the step-by-step guide to archive messages in xi with screenshots? 4. what are the transaction codes to archive messages in XI? 5. what is the

  • Database starting problem?

    Hi all My database on oracle 9 ,on windows machine.. It is in no archivelog. when I shut down the machine and startup again my database doesn't up automatically . I have to start it manually every time by giving the startup command. what is the proce