Is there any provision of extending the validity period of quotation

hi,
sap gurus,
good evening,
is there any provision of extending the validity period of quotation
for eg:
my quotation is created with a validity period of 01:06:2008 to 30:06:2008
is there any provision of extending the validity period of quotation
if its possible
plz let me know
regards,
balaji.t
09990019711

Hello,
It is a business decision to increase the validity period of a quotation. You can very well do it by changing the date in
Valid to field in the quotation. But there are a certain things to be checked with the business people before changing the validity in real time...like ... terms and conditions, rate... etc.
Prase

Similar Messages

Is there any provision to view the selected record using SYS_REFCURSOR?

hi friends ,
I was using SQL Server . now i am shifting to Oracle . so we are changing the Stored Procedures in SQLServer to Oracle SP's. I have given the structure of procedure given below . If possible , i want to see the output of select statement in the TOAD editor . If any body knows please help me
CREATE OR REPLACE PROCEDURE PS_AON
P_STATUS OUT VARCHAR2,
P_CUR OUT SYS_REFCURSOR
AS
BEGIN
OPEN P_CUR FOR
          select colum1,column2,column3 from Table 1;
EXCEPTION
               WHEN OTHERS THEN
               P_STATUS:=SQLERRM;
END;
This is one of the model of stored procedures i am using . And the editor i am using is TOAD 7.3.0 and oracle 9i. Is there any provision to view the selected records by running this procedure in TOAD editor
thanks & regards

(assuming you have relatively recent version of TOAD).
Write a small block to call the procedure (or use Toad's 'execute procedure' option) as in the example below. Note the ':' in front of 'v_cur_out'. When you run the block, TOAD will prompt you for a value / datatype for 'v_cur_out'. Ignore the value, set the datatype to 'Cursor' and click OK. The resultset (if any) will be displayed in the Data Grid window below.
DECLARE
   v_status VARCHAR2 (32767);
BEGIN
   ps_aon (v_status, :v_cur_out);
   DBMS_OUTPUT.PUT_LINE ('v_status => ' || v_status);
END;
/

Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?

Hello,
My Evaluation of SQL Server 2012 R2 expired is there any way to extended the evaluation time?
Please let me know,
Thank You! and Happy New Year

Hello,
Try to roll back the time of the computer to a few days back until you are able to perform an edition upgrade.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Is there any way to extend the spin time?

I'm retrieving heaps of old jobs from archived CDs and DVDs and what's becoming apparent is the time the CD/DVD is spinning. I can understand saving energy etc, but it's not very long at all, which means I've been spending about 3 or 4 seconds per job, waiting for the disc to spin up. Times that over the hundred+ jobs I've got, and it'll add up.. Is there any way to extend the spin time to something more like 30 seconds, or something else?

Hello Kit,
The only thing you could try is to deselect the "spin down hard disk's when possible" option in the energy saver System Pref's. I doubt this will provide much success, but its worth a shot.
Cheers
Bryza_Bone

Is there any way to extend the roaming data expiration period?

The title says it all:)
Is there any way to extend the 30-days roaming data expiration period?

No, this is not controllable directly by apps or by users (and 30-days is not contractual).
If your app needs to store data in the cloud perpetually then you'll need to use your own server.
If the app is installed then roamed data will still be saved on the client systems until the user removes it.

How to extend the validity period of Cost estimate

Hi Gurus,
The validity period of Standard Cost estimate is up to the end of fiscal year. how can we get the same Cost estimate from the begining of new fiscal year.
for example let Materila X, which has 550 as a Cost estimate.the validity period of this cost estimate is up to 31/03/2009. now i want same cost estimate for Material X, from 01/04/2009 on wards.
is it possible to get the same cost estimate from the 01/04/2009 or Do I need to run CK11N, CK24?
can anybody help me.
Thanks&Regards
Prareddy

hi,
If you want to get the same cost estimate for future use. You have to create a new cost estimate using the Dates as below
Costing date from :01/04/2009
Costing date to :Any date you desire (preferably end of 2009 financial year)
Qty structure date: As of your previous cost estimate for the material X
Valuation date :As of your previous cost estimate for the material X
Using this procedure you will have the old costs ie 550 in the cost estimate but will extend the same to as long as you desire.
Revert back for more information
Thanks

Is there any way to extend the length of the Apple component AV cable for the original iPad?

I have an original iPad, but the component video cable is too short to really do any good. Can it somehow be extended. It would really be useful if there was an adapter for the 30-pin connector that goes into the iPad itself so that one wire could extend the AV cable another 10-15 feet. I know of no such adapter. Is there one out there?
My goal is to stream YouTube videos from my iPad to my Samsung HDTV. I guess I could buy an Apple TV and do it wirelessly through my Airport Expresses.
Anyway, I would appreciate some advice from anybody who has tried to accomplish the same or similar things.

Have you been able to get this cable to work on your iPad? I just went out and bought this cable so I could stream YouTube, Netflix and my other video on my iPad and the component cable wasn't working. I went back to my Apple store and replaced it with the composite video cable and everything works fine. I do not think that the component cable works with the original iPad because its output is not HD. Anyhow, you should be able to buy extender type cables at any Radio Shack, or any audio/video retailer. Look in the cables section. keep in mind you'll need both Audio cable and component video cable extended cables to increase the distance you are using these at. Keep in mind, also, that the iPad is basically useless while playing video. You can't multitask while watching the video because,depending on what apps you have that do video mirroring, you'll end up leaving the video and whatever app you're working in will show up on your TV screen. When I watch video I just leave my iPad close by the TV and walk up to it to play or pause video. Can't use it for anything else while the movie is playing, anyway. ;)

Is there any way to lengthen the time an iPhone rings?

Is there any way to extend the time of the ring tone? I have an iPhone 4 with IOS 7.

The ring duration is controlled by the carrier. Ask them.

Is there any way of extending a polynomial trendline in Numbers '09?

Hi,
The question title says it all really. Is there any way of extending a polynomial trendline in Numbers '09, beyond the data that I currently have? I can do this in Excel, but would like to be able to do this in Numbers too.
Thanks,
Nick

Unfortunately there is no "forecast" feature for trendlines in Numbers. Wayne showed how to use the trendline equation from the chart to create additional data points for the chart. This is by far the simplest way to do it in Numbers but it has two drawbacks:
If your data changes, you'll need to manually readjust the coefficients for your forecasted point(s).
The precision of the coefficients is only three decimal places. The forecasted Y values using these coefficients might not be as accurate as you would like. For example, compare the forecasted Y value in Wayne's table at X=20 to the one in the table below.
You can avoid both problems by calculating the trendline coefficients in your table using the LINEST function. it is a little more work in the setup but it might save you time in the long run if your data changes a lot. Here is an example of for 2nd order polynomial:
The last "real" data point is in row 10.
Formula for column D =A
Formula for column E =A*A
F2 = the coefficient for X^2 =INDEX(LINEST(B2:B10,D2:E10),1)
G2 = the coefficient for X =INDEX(LINEST(B2:B10,D2:E10),2)
H2 = the constant =INDEX(LINEST(B2:B10,D2:E10),3)
Note: If you later need to add an additional data point at the end of your data, go to the last row of your data (in this example it is row 10) and "add row below". This way the formulas for the coefficients will adjust automatically to include the new row.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there a way of extending the no of minutes afte...

Is there a way of extending the no of minutes after scheduled end of program to record? My Wife has Call The Midwife on series record and every week she loses the last few mins of the program???
Anyone else having similar problems?
Many Thanks
Kim

If you are recording from BBC1 (channel 1) then the box should handle it automatically using the start/stop signals that are broadcast (EIT p/f).
If you are recording from BBC 1 HD (101) this is a multicast Extra TV channel and you can adjust the end padding in Settings.
However, both systems only work if the box has a tuner available. For example, if it finishes at 9pm Sunday and two other recordings start at the same time the box will have to decide what to do and should end the first recording at exactly 9pm so it can start the others. This is OK providing the programme doesn't run late - if it does you'll miss the end off he recording. All boxes have this problem.
I wouldn't expect the BBC to overrun on this though - they are normally better than other broadcasters.
It would be interesting to know if you do have any recordings around 9pm - do let us know. If this is the problem then see if you can record the 9pm programmes at a different time (eg if they are broadcast again later).

Is there any provision for viewing Sales Order at a plant level?

Salute All !
Is there any provision for viewing Sales Order at a plant level?
Please provide TCode or any other way.
Rgds
Srivastav

Hi
Go to SPRO>Sales & Distribution>Sales>Lists>Define selection criteria.
Select the Programme "SAPMV75A" , Trnsaction group=0 and pu display group=K and select the field =WERKS.
Hope it will resolve.
Regards
Sanjay

Is there any way to eliminate the locked file function in iWork apps?

Hi, I recently added Lion to my Mac. Is there any way to eliminate the "locked file" function. I do not use iCloud or Time Machine on my Mac. Thanks. Bob

I don't use Time Machine either but the option for this function is in the Time Machine options.
Open System Preferences > Time Machine
Click 'Options'
The bottom option should be about auto-saving. To stop applications from locking documents, uncheck the box. To extend the peiod before the document is locked, select the appropriate time from the drop-down menu.
Hope that;s what you wanted!

Is there any way to use the bundled PHP compiler without web sharing on?

Is there any way to use the bundled PHP compiler without Web Sharing on? Is there a way to make sure Web Sharing only allows local access so others on the network cannot access it? Any other easy way to get a PHP compiler on a Mac? I currently run Mac OS X 10.7.4. Any other security issues that might pop up from leaving Web Sharing on? Basically I just want a local PHP compiler so I can do some coding.

You can use another router as an 'extender' (I know that this will work seemlessly with AirPort Extemes and AirPort Express's - you'll have to check with your router manufacturer to determine what they recommend for range extenders).
You may also want to take a look at this link - http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html - it may offer some tips.
Clinton

Is there any way to access the superclass' superclass' constructor?

Hi,
Is there any way to access the superclass' superclass' constructor?
e.g.
class A {...}
class B extends A {...}
class C extends B {
public C() {
// can I do something like super.super();
// I mean then doesn't work, but is there anything similar?
}

In the OP you don't need to call "super.super()" since the A class no-args constructor will be invoked anyway.
You can, however, invoke constructors using reflection. For example:
public class A {
     public A() {
          System.out.println("A()!");
     public A(int i) {
          System.out.println("A(int i)! : " + i);
public class B extends A {
     public B() {
          System.out.println("B()!");
public class C extends B {
     public C() throws Exception {
          Class types[] = new Class[1];
          types[0] = Integer.TYPE;
          Object args[] = new Object[1];
          args[0] = new Integer(1);
          this.getClass().getSuperclass().getSuperclass().getConstructor(types).newInstance(args);
          System.out.println("C()!");
     public static void main(String[] args) throws Exception {
          new C();
}Will print:
A()!
B()!
A(int i)! : 1
C()!
btw: DON'T use this code! It's just to show you that it's possible.

Is there any provision of extending the validity period of quotation

Similar Messages

Maybe you are looking for