Is there any rate-limit or qos hardset in the OfficeExtend AP600?

Only getting 9-10MB of throughput on the Cisco OfficeExtend AP600's. I have a 25mb pipe, and when I use another router, and even a Linksys I'm able to get 25MB downloads. Let me also clarify that I'm using the personal / local SSID of the OfficeExtend, and not the corporate SSID.
Is there a way to change or remove any rate-limiting that has been hard coded into these OfficeExtend AP600 routers?

I remember seeing 2.x limitations on guest VM sizes in the 2.x docs but do not specifically remember reading about limits for a given 2.x VM host nor sets of hosts...
That being said I have 2 in Production & 3 in Testing & really hope to go to Prod soon with version 3 as it seems much better overall. I did not like 3.0.x versions but I like 3.2.1 (haven't tried the newly released 3.2.2 yet).

Similar Messages

  • Is there any session limit in operator?

    Hi,
    I am trying to run a loop thru a query, like " select col1 from table1", then in this loop I am trying to call a scenario, like : OdiStartScen -SCEN_NAME=TESTEXTRACT -LOG_LEVEL=5 -SYNC_MODE=1 "-project.var1=#col" , the query should return about 7000 rows, that means the scenario should run for about 7000 times, but the fact is in operator is only run about 60 times, and no new session produced, and the main loop is hanging there?
    Is there any session limit for the operator? or any other possible resovle method for this?
    Thanks

    Hi ,
    You can limit the number of session u can view in the Operator.
    In Operator--- > File --- > User parameters = In this you can see operator display limit. In tat you can set ....
    Hope this helps !
    Thanks
    Ananda

  • Is there any purchase limit?i buy something for three to four times and my purchase can't complete any more

    Is there any purchase limit?i buy something for three to four times and my purchase can't complete any more

    That would be the choice of the Game developer, not Apple. But it seems unlikely.

  • Bandwidth Management(Rate Limit) Using QoS Policies

    Hello,
    I need some advice. We have an ASA 5525 running version 8.6(1)2 and a 10 MG pipe. I have execs that want to limit bandwidth on users for stuff like youtube, stream media, and downloads. I found the article on ‘Bandwidth Management(Rate Limit) Using QoS Policies’ so it appears our firewall can do what we want. I’m not a cisco person. My knowledge is limited when it comes to configuration – that’s why we have SmartNet :). The advice I need is what to ask for, so to speak, when I put a case in. Can bandwidth be limited on end users and/or can they limit the ‘bandwidth rate limit’ to just youtube, steaming media, and downloads? If so, what should the limit be? and I’m assume this would be for ‘incoming’ traffic only? we’re running into some bandwidth hogs – usually youtube and/or streaming media. We have a Barracuda web filter which we’ve used to block and monitor activity but I simply do not have time to babysit this all day. I should also mention we do have critical data running up and down the pipe; such as credit card processing, DB replication between in house DB and hosted website, TPCx and EDI, FTP, and such that we don’t want restricted.
    Need input please,
    Thanks,
    D

    Hello,
    That's a question that you as the network admin of that organization could answer.
    How much traffic for business purposes must travel via HTTP/HTTPS?
    How much bandwith are you willing to provide to this 2 protocols?
    Those are the kind of answers you need to answer before setting the number
    Regards
    Remember to rate all of the helpful posts, Just click the 5 stars at the left of each post
    Julio

  • Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

    Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
    Thanks!

    goldberry wrote:
    Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
    I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

  • My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in but not make purchases from the store so I set up a new login/account .  Is there any way to move my music to the new account?

    My itunes account was disabled for some reason.  I changed password in iforgot and still didn't work.  I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2.  Is there any way to move my music to the new account?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

    I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

    I sent it via FedEx. 
    Call FedEx.  They will be able to track their own packages.  They will let you know if your iPod Nano was delivered and to who!

  • The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

    The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed.  Thanks!

    If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
    If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership. 
    Please refer to : Lightroom and Creative Cloud FAQ
    Regards
    Rajshree

  • Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

    Is there any way to get my reminders (from the new iPhone app) to sync with something on my laptop (Mail, iCal, some other desktop app)?

    Yes, if you have iCloud set up on your phone and computer, then reminders will be synced through iCal.

  • Is there any way to buy tv shows from the uk iTunes when I live in Ireland?

    is there any way to buy tv shows from the uk iTunes when I live in Ireland?

    And according to iTunes / Help...
    The iTunes Store may not be available in all countries or regions, and iTunes Store content may vary by country or region.

  • I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

    I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

    Nope, it either needs to be plugged in or turned on with the power button.
    A replacement iPhone 4 is $149, but at least the whole phone is replaced.

  • Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?

    Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?Is there anyway I can use my iPod Touch serial number or Apple ID to trace and find back my iPod Touch? Cause I lost it recently(as you know iPod Touch can only go online if there is WiFi). is there any other ways too, apart from contacting the police?

    No.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

    Is there any way to link page number with the reference page number within text in InDesign CC and CS6?

    You should ask in InDesign
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I need to transfer up to 200 pages and keynote files from my macbook to my PC. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as word-friendly?

    I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

    I need to transfer up to two hundred Pages and Keynote files from my macbook running on Mac OS X 10.6.8 to my PC running windows. Is there any way I can convert all of the files to word-friendly documents as a batch change or will I have to open each individual file and re-save it as a word-friendly file?

  • Is there any possibility in Ecc6.0 to get the daybook.

    is there any possibility in Ecc6.0 to get the daybook.

    hi
    Pls rund document general report , u will get the desired result
    Assign point if useful

Maybe you are looking for

  • Migrating apps from WLS 10.3.0 to SOA Suite 11g-- WLS 10.3.3

    Hi, We want to migrate our apps from WLS 10.3.0 to SOA Suite 11g-->WLS 10.3.3. While deploying the apps on WLS 10.3.3 (SOA Suite Domain 11g), it is throwing exception as below. This exception is common for almost all apps. Kindly help. Caused by: web

  • Third party excise

    Hi All,Can any one tell me in third party at Depot level  how the  Excise is configured. Plz kindly guide me with the steps........ thks in advance.....

  • How to achieve the from and to date range in report builder 3.

    I AM TRYING TO CREATE ONE REPORT FROM REPORT BUILDER 3. WHERE I AM UNABLE TO DEFINE THE DATE RANGE. HOW TO ACHIEVE THE DATE RANGE IN REPORT BUILDER. NEED FROM DATE AND TO DATE FILTER IN REPORT BUILDER FOR PK DATE.

  • CJ20N LANGUAGE ZH NOT IN SYSTEM

    Hello guys, I have a problem related the chinese language. Despite the report RSCPINST shows that the language is correctly installed ( I see the ZH in the list) and the parameter correctly maintained in the DEFAULT profile (value 1 set). when i try

  • Playing on more than 2 speakers independently

    I am developing a system which needs to play something different on each speaker. More than two speakers should be used for example: Speaker#1: Playing birds singing on right Speaker#2: Playing wind blowing from left Speaker#3: Some music in the back